From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>, <ath9k-devel@lists.ath9k.org>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH] Remove _t postfix for ar9287_eeprom structure
Date: Mon, 3 Aug 2009 13:55:48 -0700 [thread overview]
Message-ID: <1249332948-28246-1-git-send-email-lrodriguez@atheros.com> (raw)
We don't use typdefs on ath9k, remove that _t.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/ath/ath9k/eeprom.c | 24 ++++++++++++------------
drivers/net/wireless/ath/ath9k/eeprom.h | 2 +-
drivers/net/wireless/ath/ath9k/hw.h | 2 +-
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index 4e4a300..c724c55 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -2794,7 +2794,7 @@ static int ath9k_hw_AR9287_get_eeprom_rev(struct ath_hw *ah)
static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
{
- struct ar9287_eeprom_t *eep = &ah->eeprom.map9287;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
u16 *eep_data;
int addr, eep_start_loc = AR9287_EEP_START_LOC;
eep_data = (u16 *)eep;
@@ -2803,7 +2803,7 @@ static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
"Reading from EEPROM, not flash\n");
}
- for (addr = 0; addr < sizeof(struct ar9287_eeprom_t) / sizeof(u16);
+ for (addr = 0; addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
addr++) {
if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
@@ -2820,7 +2820,7 @@ static int ath9k_hw_AR9287_check_eeprom(struct ath_hw *ah)
u16 temp, word, magic, magic2, *eepdata;
int i, addr;
bool need_swap = false;
- struct ar9287_eeprom_t *eep = &ah->eeprom.map9287;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
if (!ath9k_hw_use_flash(ah)) {
if (!ath9k_hw_nvram_read
@@ -2842,7 +2842,7 @@ static int ath9k_hw_AR9287_check_eeprom(struct ath_hw *ah)
eepdata = (u16 *)(&ah->eeprom);
for (addr = 0;
- addr < sizeof(struct ar9287_eeprom_t) / sizeof(u16);
+ addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
addr++) {
temp = swab16(*eepdata);
*eepdata = temp;
@@ -2863,8 +2863,8 @@ static int ath9k_hw_AR9287_check_eeprom(struct ath_hw *ah)
else
el = ah->eeprom.map9287.baseEepHeader.length;
- if (el > sizeof(struct ar9287_eeprom_t))
- el = sizeof(struct ar9287_eeprom_t) / sizeof(u16);
+ if (el > sizeof(struct ar9287_eeprom))
+ el = sizeof(struct ar9287_eeprom) / sizeof(u16);
else
el = el / sizeof(u16);
@@ -2925,7 +2925,7 @@ static int ath9k_hw_AR9287_check_eeprom(struct ath_hw *ah)
static u32 ath9k_hw_AR9287_get_eeprom(struct ath_hw *ah,
enum eeprom_param param)
{
- struct ar9287_eeprom_t *eep = &ah->eeprom.map9287;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
struct base_eep_ar9287_header *pBase = &eep->baseEepHeader;
u16 ver_minor;
@@ -3215,7 +3215,7 @@ static void ath9k_hw_set_AR9287_power_cal_table(struct ath_hw *ah,
u16 xpdGainValues[AR9287_NUM_PD_GAINS] = {0, 0, 0, 0};
u32 reg32, regOffset, regChainOffset;
int16_t modalIdx, diff = 0;
- struct ar9287_eeprom_t *pEepData = &ah->eeprom.map9287;
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
xpdMask = pEepData->modalHeader.xpdGain;
if ((pEepData->baseEepHeader.version & AR9287_EEP_VER_MINOR_MASK) >=
@@ -3385,7 +3385,7 @@ static void ath9k_hw_set_AR9287_power_per_rate_table(struct ath_hw *ah,
struct chan_centers centers;
int tx_chainmask;
u16 twiceMinEdgePower;
- struct ar9287_eeprom_t *pEepData = &ah->eeprom.map9287;
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
tx_chainmask = ah->txchainmask;
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
@@ -3618,7 +3618,7 @@ static void ath9k_hw_AR9287_set_txpower(struct ath_hw *ah,
{
#define INCREASE_MAXPOW_BY_TWO_CHAIN 6
#define INCREASE_MAXPOW_BY_THREE_CHAIN 10
- struct ar9287_eeprom_t *pEepData = &ah->eeprom.map9287;
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &pEepData->modalHeader;
int16_t ratesArray[Ar5416RateSize];
int16_t txPowerIndexOffset = 0;
@@ -3781,7 +3781,7 @@ static void ath9k_hw_AR9287_set_addac(struct ath_hw *ah,
static void ath9k_hw_AR9287_set_board_values(struct ath_hw *ah,
struct ath9k_channel *chan)
{
- struct ar9287_eeprom_t *eep = &ah->eeprom.map9287;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
u16 antWrites[AR9287_ANT_16S];
@@ -3933,7 +3933,7 @@ static u8 ath9k_hw_AR9287_get_num_ant_config(struct ath_hw *ah,
static u16 ath9k_hw_AR9287_get_eeprom_antenna_cfg(struct ath_hw *ah,
struct ath9k_channel *chan)
{
- struct ar9287_eeprom_t *eep = &ah->eeprom.map9287;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
return pModal->antCtrlCommon & 0xFFFF;
}
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 335098d..db77e90 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -600,7 +600,7 @@ struct ar5416_eeprom_4k {
u8 padding;
} __packed;
-struct ar9287_eeprom_t {
+struct ar9287_eeprom {
struct base_eep_ar9287_header baseEepHeader;
u8 custData[AR9287_DATA_SZ];
struct modal_eep_ar9287_header modalHeader;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 4e717cc..9c23db1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -403,7 +403,7 @@ struct ath_hw {
union {
struct ar5416_eeprom_def def;
struct ar5416_eeprom_4k map4k;
- struct ar9287_eeprom_t map9287;
+ struct ar9287_eeprom map9287;
} eeprom;
const struct eeprom_ops *eep_ops;
enum ath9k_eep_map eep_map;
--
1.6.3.3
reply other threads:[~2009-08-03 20:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1249332948-28246-1-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).