From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-pz0-f196.google.com ([209.85.222.196]:38644 "EHLO mail-pz0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933209AbZHHDn2 (ORCPT ); Fri, 7 Aug 2009 23:43:28 -0400 Received: by mail-pz0-f196.google.com with SMTP id 34so1941429pzk.4 for ; Fri, 07 Aug 2009 20:43:29 -0700 (PDT) From: Javier Cardona To: linux-wireless@vger.kernel.org Cc: Javier Cardona , Andrey Yurovsky , johannes@sipsolutions.net, linville@tuxdriver.com, devel@lists.open80211s.org Subject: [PATCH] mac80211: Simulate transmission losses on plinks to aid in testing mesh metrics. Date: Fri, 7 Aug 2009 20:31:49 -0700 Message-Id: <1249702314-32504-4-git-send-email-javier@cozybit.com> In-Reply-To: <1249702314-32504-3-git-send-email-javier@cozybit.com> References: <> <1249702314-32504-1-git-send-email-javier@cozybit.com> <1249702314-32504-2-git-send-email-javier@cozybit.com> <1249702314-32504-3-git-send-email-javier@cozybit.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: This enables us to specify a simulated loss probability per mesh peer link. Useful to simulate and test different mesh topologies and test different mesh metrics. The simulated loss rate setting can be configured as a plink action. The intended use is: iw dev mesh station set plink_action loss 25 Signed-off-by: Andrey Yurovsky Signed-off-by: Javier Cardona --- include/linux/nl80211.h | 4 +++ include/net/cfg80211.h | 4 +++ net/mac80211/cfg.c | 6 +++++ net/mac80211/mesh.c | 1 + net/mac80211/mesh.h | 1 + net/mac80211/mesh_hwmp.c | 1 + net/mac80211/mesh_plink.c | 6 +++++ net/mac80211/sta_info.h | 1 + net/mac80211/tx.c | 54 +++++++++++++++++++++++++++++++++++++++++++- net/wireless/nl80211.c | 9 +++++++ 10 files changed, 85 insertions(+), 2 deletions(-) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index a8d71ed..3de615b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -713,6 +713,7 @@ enum nl80211_attrs { NL80211_ATTR_KEYS, NL80211_ATTR_PID, + NL80211_ATTR_SIM_LOSS, /* add attributes here, update the policy in nl80211.c */ @@ -1198,6 +1199,8 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_SIM_LOSS_RATE: simulated loss rate at this MP. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -1215,6 +1218,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_SIM_LOSS_RATE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d5756c9..6bc5957 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -265,6 +265,7 @@ enum plink_actions { PLINK_ACTION_INVALID, PLINK_ACTION_OPEN, PLINK_ACTION_BLOCK, + PLINK_ACTION_LOSS, }; /** @@ -282,6 +283,7 @@ enum plink_actions { * (bitmask of BIT(NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change + * @sim_loss_rate: simulated TX probable loss percentage */ struct station_parameters { u8 *supported_rates; @@ -292,6 +294,7 @@ struct station_parameters { u8 supported_rates_len; u8 plink_action; struct ieee80211_ht_cap *ht_capa; + u8 sim_loss_rate; }; /** @@ -508,6 +511,7 @@ struct mesh_config { u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; + u8 dot11MeshSimLossRate; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5608f6c..8067f66 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -693,6 +693,9 @@ static void sta_apply_parameters(struct ieee80211_local *local, case PLINK_ACTION_BLOCK: mesh_plink_block(sta); break; + case PLINK_ACTION_LOSS: + mesh_plink_sim_loss(sta, params->sim_loss_rate); + break; } } } @@ -1043,6 +1046,9 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy, mask)) conf->dot11MeshHWMPnetDiameterTraversalTime = nconf->dot11MeshHWMPnetDiameterTraversalTime; + if (_chg_mesh_attr(NL80211_MESHCONF_SIM_LOSS_RATE, mask)) + conf->dot11MeshSimLossRate = + nconf->dot11MeshSimLossRate; return 0; } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 8c068e2..d9292a9 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -653,6 +653,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) MESH_PATH_REFRESH_TIME; ifmsh->mshcfg.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT; + ifmsh->mshcfg.dot11MeshSimLossRate = 0; ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; ifmsh->dsn = 0; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 6aaf1ec..8e70dae 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -238,6 +238,7 @@ void mesh_plink_broken(struct sta_info *sta); void mesh_plink_deactivate(struct sta_info *sta); int mesh_plink_open(struct sta_info *sta); void mesh_plink_block(struct sta_info *sta); +void mesh_plink_sim_loss(struct sta_info *sta, u8 rate); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 1cd1e72..b4309b2 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -272,6 +272,7 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, } last_hop_metric = airtime_link_metric_get(local, sta); + printk("XXX: last_hop_metric = %d\n", last_hop_metric); /* Update and check originator routing info */ fresh_info = true; diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index cb14253..7c49c95 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -382,6 +382,12 @@ void mesh_plink_block(struct sta_info *sta) spin_unlock_bh(&sta->lock); } +void mesh_plink_sim_loss(struct sta_info *sta, u8 rate) +{ + spin_lock_bh(&sta->lock); + sta->plink_sim_loss = rate; + spin_unlock_bh(&sta->lock); +} void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index ccc3adf..a248a8b 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -294,6 +294,7 @@ struct sta_info { bool ignore_plink_timer; bool plink_timer_was_running; enum plink_state plink_state; + u8 plink_sim_loss; u32 plink_timeout; struct timer_list plink_timer; #endif diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c9be9dc..0df5a96 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +40,47 @@ /* misc utils */ +/* Decide whether we should simulate the loss of a frame based on the simulated + * plink loss probability and the frame's destination. Used for testing. + * + * Must be invoked with the rcu read lock held. + * */ +static int random_tx_loss(struct ieee80211_sub_if_data *sdata, struct + ieee80211_hdr *hdr) +{ + struct sta_info *sta; + u8 r = 0; + + get_random_bytes(&r, sizeof(r)); + + list_for_each_entry(sta, &sdata->local->sta_list, list) { + if (!memcmp(sta->sta.addr, hdr->addr1, 6)) + if (r*25 < sta->plink_sim_loss*64) + return 1; + } + + return 0; +} + + +static int simulate_tx_loss(struct ieee80211_sub_if_data *sdata, + struct ieee80211_hdr *hdr, struct sk_buff *skb) +{ + struct ieee80211_hw *hw = &sdata->local->hw; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + ieee80211_tx_info_clear_status(info); + info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS; + + info->status.rates[0].idx = 0; + info->status.rates[0].count = hw->max_rate_tries; + + ieee80211_tx_status_irqsafe(hw, skb); + + /* this will ensure that the frame is not queued in the tx path */ + return IEEE80211_TX_OK; +} + static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, int next_frag_len) { @@ -1244,6 +1286,7 @@ static void ieee80211_tx(struct ieee80211_sub_if_data *sdata, struct ieee80211_tx_data tx; ieee80211_tx_result res_prepare; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct sk_buff *next; unsigned long flags; int ret, retries; @@ -1278,7 +1321,10 @@ static void ieee80211_tx(struct ieee80211_sub_if_data *sdata, retries = 0; retry: - ret = __ieee80211_tx(local, &tx.skb, tx.sta, txpending); + if (ieee80211_vif_is_mesh(&sdata->vif) && random_tx_loss(sdata, hdr)) + ret = simulate_tx_loss(sdata, hdr, skb); + else + ret = __ieee80211_tx(local, &tx.skb, tx.sta, txpending); switch (ret) { case IEEE80211_TX_OK: break; @@ -1857,7 +1903,11 @@ static bool ieee80211_tx_pending_skb(struct ieee80211_local *local, hdr = (struct ieee80211_hdr *)skb->data; sta = sta_info_get(local, hdr->addr1); - ret = __ieee80211_tx(local, &skb, sta, true); + if (ieee80211_vif_is_mesh(&sdata->vif) && + random_tx_loss(sdata, hdr)) + ret = simulate_tx_loss(sdata, hdr, skb); + else + ret = __ieee80211_tx(local, &skb, sta, true); if (ret != IEEE80211_TX_OK) result = false; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 667a87d..1dfe8ea 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1878,6 +1878,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_action = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); + if (info->attrs[NL80211_ATTR_SIM_LOSS]) + params.sim_loss_rate = + nla_get_u8(info->attrs[NL80211_ATTR_SIM_LOSS]); + rtnl_lock(); err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev); @@ -2619,6 +2623,8 @@ static int nl80211_get_mesh_params(struct sk_buff *skb, cur_params.dot11MeshHWMPpreqMinInterval); NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, cur_params.dot11MeshHWMPnetDiameterTraversalTime); + NLA_PUT_U8(msg, NL80211_MESHCONF_SIM_LOSS_RATE, + cur_params.dot11MeshSimLossRate); nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); err = genlmsg_reply(msg, info); @@ -2661,6 +2667,7 @@ nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] __read_mostly = { [NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT] = { .type = NLA_U32 }, [NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL] = { .type = NLA_U16 }, [NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 }, + [NL80211_MESHCONF_SIM_LOSS_RATE] = { .type = NLA_U8 }, }; static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info) @@ -2729,6 +2736,8 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info) dot11MeshHWMPnetDiameterTraversalTime, mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshSimLossRate, + mask, NL80211_MESHCONF_SIM_LOSS_RATE, nla_get_u8); /* Apply changes */ err = rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask); -- 1.5.4.3