From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Larry.Finger@lwfinger.net,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH v4 16/34] wireless: organize group drivers alphabetically
Date: Fri, 14 Aug 2009 16:25:41 -0400 [thread overview]
Message-ID: <1250281559-13041-17-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1250281559-13041-1-git-send-email-lrodriguez@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
drivers/net/wireless/Kconfig | 286 +++++++++++++++++++++---------------------
1 files changed, 144 insertions(+), 142 deletions(-)
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 325d14d..a6801fa 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -110,77 +110,73 @@ menuconfig WLAN_80211
This option does not affect the kernel build, it only
lets you choose drivers.
-menuconfig MARVELL_80211
- bool "Marvell"
- depends on WLAN_80211
- ---help---
- This will enable the support for Marvell wireless drivers. This includes
- the drivers: libertas, libertas_tf, and mwl8k.
+source "drivers/net/wireless/ath/Kconfig"
-if MARVELL_80211
-config LIBERTAS
- tristate "Marvell 8xxx Libertas WLAN driver support"
+config ATMEL_80211
+ bool "Atmel"
depends on WLAN_80211
- select WIRELESS_EXT
- select LIB80211
- select FW_LOADER
- ---help---
- A library for Marvell Libertas 8xxx devices.
-
-config LIBERTAS_USB
- tristate "Marvell Libertas 8388 USB 802.11b/g cards"
- depends on LIBERTAS && USB
---help---
- A driver for Marvell Libertas 8388 USB devices.
+ This will enable the support for Atmel wireless drivers.
-config LIBERTAS_CS
- tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
- depends on LIBERTAS && PCMCIA
- select FW_LOADER
- ---help---
- A driver for Marvell Libertas 8385 CompactFlash devices.
+if ATMEL_80211
-config LIBERTAS_SDIO
- tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
- depends on LIBERTAS && MMC
- ---help---
- A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on (PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
-config LIBERTAS_SPI
- tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
- depends on LIBERTAS && SPI
- ---help---
- A driver for Marvell Libertas 8686 SPI devices.
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
-config LIBERTAS_DEBUG
- bool "Enable full debugging output in the Libertas module."
- depends on LIBERTAS
- ---help---
- Debugging support.
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
-config LIBERTAS_THINFIRM
- tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
- depends on WLAN_80211 && MAC80211
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
select FW_LOADER
+ select CRC32
---help---
- A library for Marvell Libertas 8xxx devices using thinfirm.
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
-config LIBERTAS_THINFIRM_USB
- tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
- depends on LIBERTAS_THINFIRM && USB
- ---help---
- A driver for Marvell Libertas 8388 USB devices using thinfirm.
+config AT76C50X_USB
+ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+ depends on MAC80211 && WLAN_80211 && USB
+ select FW_LOADER
+ ---help---
+ Enable support for USB Wireless devices using Atmel at76c503,
+ at76c505 or at76c505a chips.
-config MWL8K
- tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
- depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+endif # ATMEL_80211
+
+config BROADCOM_80211
+ bool "Broadcom wireless driver support"
+ depends on WLAN_80211
---help---
- This driver supports Marvell TOPDOG 802.11 wireless cards.
+ This will enable the support for Broadcom wireless drivers. This
+ includes b43 driver and the b43legacy driver.
- To compile this driver as a module, choose M here: the module
- will be called mwl8k. If unsure, say N.
+if BROADCOM_80211
-endif # MARVELL_80211
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
+
+endif # BROADCOM_80211
config CISCO_80211
bool "Cisco"
@@ -232,57 +228,20 @@ config AIRO_CS
endif # CISCO_80211
-config ATMEL_80211
- bool "Atmel"
+menuconfig INTEL_80211
+ bool "Intel"
depends on WLAN_80211
---help---
- This will enable the support for Atmel wireless drivers.
-
-if ATMEL_80211
-
-config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on (PCI || PCMCIA) && WLAN_80211
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
+ This will enable the support for Intel wireless drivers. This
+ includes ipw2100, ipw2200, iwl3945, iwlagn, and iwmc3200wifi
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on ATMEL && PCMCIA
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
+if INTEL_80211
-config AT76C50X_USB
- tristate "Atmel at76c503/at76c505/at76c505a USB cards"
- depends on MAC80211 && WLAN_80211 && USB
- select FW_LOADER
- ---help---
- Enable support for USB Wireless devices using Atmel at76c503,
- at76c505 or at76c505a chips.
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/iwmc3200wifi/Kconfig"
-endif # ATMEL_80211
+endif # INTEL_80211
config CONEXANT_ST_80211
bool "Intersil / Conexant / STEricsson"
@@ -347,50 +306,79 @@ config PRISM54
endif # CONEXANT_ST_80211
-config ZYDAS_80211
- bool "ZyDAS"
+menuconfig MARVELL_80211
+ bool "Marvell"
depends on WLAN_80211
---help---
- This will enable the support for ZyDAS wireless drivers. This includes
- the 802.11g zd1211rw usb driver and the older 802.11b zd1201 usb driver.
+ This will enable the support for Marvell wireless drivers. This includes
+ the drivers: libertas, libertas_tf, and mwl8k.
-if ZYDAS_80211
+if MARVELL_80211
+config LIBERTAS
+ tristate "Marvell 8xxx Libertas WLAN driver support"
+ depends on WLAN_80211
+ select WIRELESS_EXT
+ select LIB80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices.
-source "drivers/net/wireless/zd1211rw/Kconfig"
+config LIBERTAS_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+ depends on LIBERTAS && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices.
-config USB_ZD1201
- tristate "USB ZD1201 based Wireless device support"
- depends on USB && WLAN_80211
- select WIRELESS_EXT
+config LIBERTAS_CS
+ tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+ depends on LIBERTAS && PCMCIA
select FW_LOADER
---help---
- Say Y if you want to use wireless LAN adapters based on the ZyDAS
- ZD1201 chip.
+ A driver for Marvell Libertas 8385 CompactFlash devices.
- This driver makes the adapter appear as a normal Ethernet interface,
- typically on wlan0.
+config LIBERTAS_SDIO
+ tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
+ depends on LIBERTAS && MMC
+ ---help---
+ A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
- The zd1201 device requires external firmware to be loaded.
- This can be found at http://linux-lc100020.sourceforge.net/
+config LIBERTAS_SPI
+ tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
+ depends on LIBERTAS && SPI
+ ---help---
+ A driver for Marvell Libertas 8686 SPI devices.
- To compile this driver as a module, choose M here: the
- module will be called zd1201.
+config LIBERTAS_DEBUG
+ bool "Enable full debugging output in the Libertas module."
+ depends on LIBERTAS
+ ---help---
+ Debugging support.
-endif # ZYDAS_80211
+config LIBERTAS_THINFIRM
+ tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+ depends on WLAN_80211 && MAC80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices using thinfirm.
-config BROADCOM_80211
- bool "Broadcom"
- depends on WLAN_80211
+config LIBERTAS_THINFIRM_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+ depends on LIBERTAS_THINFIRM && USB
---help---
- This will enable the support for Broadcom wireless drivers. This
- includes b43 driver, b43legacy driver and the rndis_wlan driver.
+ A driver for Marvell Libertas 8388 USB devices using thinfirm.
-if BROADCOM_80211
+config MWL8K
+ tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ ---help---
+ This driver supports Marvell TOPDOG 802.11 wireless cards.
-source "drivers/net/wireless/b43/Kconfig"
-source "drivers/net/wireless/b43legacy/Kconfig"
+ To compile this driver as a module, choose M here: the module
+ will be called mwl8k. If unsure, say N.
-endif # BROADCOM_80211
+endif # MARVELL_80211
+
+source "drivers/net/wireless/rt2x00/Kconfig"
config REALTEK_80211
bool "Realtek"
@@ -488,24 +476,38 @@ config RTL8187_LEDS
endif # REALTEK_80211
-menuconfig INTEL_80211
- bool "Intel"
+source "drivers/net/wireless/wl12xx/Kconfig"
+
+config ZYDAS_80211
+ bool "ZyDAS"
depends on WLAN_80211
---help---
- This will enable the support for Intel wireless drivers. This
- includes ipw2100, ipw2200, iwl3945, iwlagn, and iwmc3200wifi
+ This will enable the support for ZyDAS wireless drivers. This includes
+ the 802.11g zd1211rw usb driver and the older 802.11b zd1201 usb driver.
-if INTEL_80211
+if ZYDAS_80211
-source "drivers/net/wireless/ipw2x00/Kconfig"
-source "drivers/net/wireless/iwlwifi/Kconfig"
-source "drivers/net/wireless/iwmc3200wifi/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
-endif # INTEL_80211
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on USB && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
-source "drivers/net/wireless/ath/Kconfig"
-source "drivers/net/wireless/rt2x00/Kconfig"
-source "drivers/net/wireless/wl12xx/Kconfig"
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
+
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+
+endif # ZYDAS_80211
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
--
1.6.2.5
next prev parent reply other threads:[~2009-08-14 20:28 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-14 20:25 [PATCH v4 00/34] wireless: update/re-arrange kconfigs Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 01/34] wireless: move iwmc3200wifi closer to the other intel drivers Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 02/34] wireless: group intel wireless drivers on kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 03/34] wireless: move MWL8K right below libertas " Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 05/34] wireless: move p54 and prism54 drivers closer " Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 06/34] wireless: group Conexant / STEricsson drivers in kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 07/34] wireless: move zd1211rw option closer to old ZyDAS on kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 08/34] wireless: group ZyDAS wireless drivers in kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 09/34] wireless: group Realtek wireless on kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 10/34] wireless: group Broadcom drivers " Luis R. Rodriguez
2009-08-15 12:09 ` Gábor Stefanik
2009-08-15 22:05 ` Luis R. Rodriguez
2009-08-16 13:15 ` Gábor Stefanik
2009-08-17 15:35 ` Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 11/34] wireless: clarify rndis_wlan is not broadcom specific Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 12/34] wireless: group Atmel wireless together on kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 13/34] wireless: move AIRO_CS closer to AIRO_CS Luis R. Rodriguez
2009-08-14 20:57 ` Pavel Roskin
2009-08-14 21:02 ` Gábor Stefanik
2009-08-14 20:25 ` [PATCH v4 14/34] wireless: group Cisco together on kconfig Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 15/34] wireless: move group drivers together Luis R. Rodriguez
2009-08-14 20:25 ` Luis R. Rodriguez [this message]
2009-08-14 20:25 ` [PATCH v4 17/34] wireless: remove IEEE 802.11 description on hostapd Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 18/34] wireless: move mac80211_hwsim to top level wireless driver menu Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 19/34] wireless: organize individual drivers alphabetically Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 20/34] wireless: simplify WLAN_PRE80211 entries Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 21/34] wireless: simplify WLAN_80211 entries Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 22/34] wireless: remove "Wireless" from rndis kconfig entry Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 23/34] wireless: downgrade TI driver from menuconfig to config Luis R. Rodriguez
2009-08-15 12:13 ` Gábor Stefanik
2009-08-15 22:07 ` Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 24/34] wireless: Update TI kconfig description Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 25/34] wireless: make ath consistent with the other groups Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 26/34] wireless: update top level wireless driver entry Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 27/34] wireless: update wireless kconfig description Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 28/34] wireless: update cfg80211 kconfig entry Luis R. Rodriguez
2009-08-14 21:13 ` Johannes Berg
2009-08-14 20:25 ` [PATCH v4 29/34] wireless: update reg debug " Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 30/34] wireless: update WIRELESS_EXT " Luis R. Rodriguez
2009-08-14 21:09 ` Johannes Berg
2009-08-14 20:25 ` [PATCH v4 31/34] wireless: update mac80211 " Luis R. Rodriguez
2009-08-14 21:12 ` Johannes Berg
2009-08-14 20:25 ` [PATCH v4 32/34] wireless: make mac80211 select cfg80211 Luis R. Rodriguez
2009-08-14 21:06 ` Johannes Berg
2009-08-15 12:12 ` Gábor Stefanik
2009-08-15 12:15 ` Johannes Berg
2009-08-17 17:00 ` Luis R. Rodriguez
2009-08-17 21:37 ` Johannes Berg
2009-08-18 0:35 ` Luis R. Rodriguez
2009-08-18 7:15 ` Johannes Berg
2009-08-14 20:25 ` [PATCH v4 33/34] wireless: remove mac80211 rate selection extra menu Luis R. Rodriguez
2009-08-14 20:25 ` [PATCH v4 34/34] wireless: mark prism54.ko as deprecated and mark for removal Luis R. Rodriguez
2009-08-15 7:59 ` Johannes Berg
2009-08-17 17:06 ` Luis R. Rodriguez
2009-08-15 0:49 ` [PATCH v4 00/34] wireless: update/re-arrange kconfigs Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1250281559-13041-17-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).