From: Johannes Berg <johannes@sipsolutions.net>
To: Javier Cardona <javier@cozybit.com>
Cc: linux-wireless@vger.kernel.org,
Steve Derosier <steve@cozybit.com>,
devel@lists.open80211s.org
Subject: Re: [PATCH 2/2] mac80211: Moved mesh action codes to a more visible location
Date: Wed, 31 Mar 2010 18:38:11 +0200 [thread overview]
Message-ID: <1270053491.16210.41.camel@jlt3.sipsolutions.net> (raw)
In-Reply-To: <1269885621-10257-2-git-send-email-javier@cozybit.com>
On Mon, 2010-03-29 at 11:00 -0700, Javier Cardona wrote:
> Grouped mesh action codes together with the other action codes in
> ieee80211.h.
>
> Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
> ---
> include/linux/ieee80211.h | 2 ++
> net/mac80211/mesh.c | 4 ++--
> net/mac80211/mesh.h | 2 --
> net/mac80211/mesh_hwmp.c | 4 ++--
> net/mac80211/mesh_plink.c | 2 +-
> net/mac80211/rx.c | 6 +++---
> 6 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
> index 1998495..e0f528e 100644
> --- a/include/linux/ieee80211.h
> +++ b/include/linux/ieee80211.h
> @@ -1211,6 +1211,8 @@ enum ieee80211_category {
> WLAN_CATEGORY_SA_QUERY = 8,
> WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
> WLAN_CATEGORY_WMM = 17,
> + WLAN_CATEGORY_MESH_PLINK = 30, /* Pending ANA approval */
> + WLAN_CATEGORY_MESH_PATH_SEL = 32, /* Pending ANA approval */
> WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
> WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
> };
> diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
> index 7a6bebc..2669fbf 100644
> --- a/net/mac80211/mesh.c
> +++ b/net/mac80211/mesh.c
> @@ -600,10 +600,10 @@ static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
> struct ieee80211_rx_status *rx_status)
> {
> switch (mgmt->u.action.category) {
> - case MESH_PLINK_CATEGORY:
> + case WLAN_CATEGORY_MESH_PLINK:
> mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
> break;
> - case MESH_PATH_SEL_CATEGORY:
> + case WLAN_CATEGORY_MESH_PATH_SEL:
> mesh_rx_path_sel_frame(sdata, mgmt, len);
> break;
> }
> diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
> index 85562c5..c88087f 100644
> --- a/net/mac80211/mesh.h
> +++ b/net/mac80211/mesh.h
> @@ -209,8 +209,6 @@ struct mesh_rmc {
> #define MESH_MAX_MPATHS 1024
>
> /* Pending ANA approval */
> -#define MESH_PLINK_CATEGORY 30
> -#define MESH_PATH_SEL_CATEGORY 32
> #define MESH_PATH_SEL_ACTION 0
>
> /* PERR reason codes */
> diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
> index ccff613..36141d6 100644
> --- a/net/mac80211/mesh_hwmp.c
> +++ b/net/mac80211/mesh_hwmp.c
> @@ -131,7 +131,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
> memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
> /* BSSID == SA */
> memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
> - mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
> + mgmt->u.action.category = WLAN_CATEGORY_MESH_PATH_SEL;
> mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
>
> switch (action) {
> @@ -224,7 +224,7 @@ int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn,
> memcpy(mgmt->da, ra, ETH_ALEN);
> memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
> /* BSSID is left zeroed, wildcard value */
> - mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
> + mgmt->u.action.category = WLAN_CATEGORY_MESH_PATH_SEL;
> mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
> ie_len = 15;
> pos = skb_put(skb, 2 + ie_len);
> diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
> index 1a29c4a..8517f88 100644
> --- a/net/mac80211/mesh_plink.c
> +++ b/net/mac80211/mesh_plink.c
> @@ -171,7 +171,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
> memcpy(mgmt->da, da, ETH_ALEN);
> memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
> /* BSSID is left zeroed, wildcard value */
> - mgmt->u.action.category = MESH_PLINK_CATEGORY;
> + mgmt->u.action.category = WLAN_CATEGORY_MESH_PLINK;
> mgmt->u.action.u.plink_action.action_code = action;
>
> if (action == PLINK_CLOSE)
> diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
> index 1e03972..43c0310 100644
> --- a/net/mac80211/rx.c
> +++ b/net/mac80211/rx.c
> @@ -484,7 +484,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
>
> if (ieee80211_is_action(hdr->frame_control)) {
> mgmt = (struct ieee80211_mgmt *)hdr;
> - if (mgmt->u.action.category != MESH_PLINK_CATEGORY)
> + if (mgmt->u.action.category != WLAN_CATEGORY_MESH_PLINK)
> return RX_DROP_MONITOR;
> return RX_CONTINUE;
> }
> @@ -1964,8 +1964,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
> goto handled;
> }
> break;
> - case MESH_PLINK_CATEGORY:
> - case MESH_PATH_SEL_CATEGORY:
> + case WLAN_CATEGORY_MESH_PLINK:
> + case WLAN_CATEGORY_MESH_PATH_SEL:
> if (ieee80211_vif_is_mesh(&sdata->vif))
> return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
> break;
next prev parent reply other threads:[~2010-03-31 16:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <368d7bd403c196b9e3a306eb7863a621@localhost>
[not found] ` <1269653791-28478-1-git-send-email-javier@cozybit.com>
2010-03-29 6:30 ` [PATCH v2] mac80211: Handle mesh action frames in ieee80211_rx_h_action Johannes Berg
2010-03-29 18:00 ` [PATCH 1/2 v3] " Javier Cardona
2010-03-29 18:00 ` [PATCH 2/2] mac80211: Moved mesh action codes to a more visible location Javier Cardona
2010-03-31 16:38 ` Johannes Berg [this message]
2010-03-31 16:37 ` [PATCH 1/2 v3] mac80211: Handle mesh action frames in ieee80211_rx_h_action Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270053491.16210.41.camel@jlt3.sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=devel@lists.open80211s.org \
--cc=javier@cozybit.com \
--cc=linux-wireless@vger.kernel.org \
--cc=steve@cozybit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).