From: Dan Williams <dcbw@redhat.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Alagu Sankar <alagusankar@gmail.com>
Subject: [PATCH 1/2] libertas: consolidate SDIO firmware wait code
Date: Thu, 15 Apr 2010 13:27:44 -0700 [thread overview]
Message-ID: <1271363264.10765.3.camel@localhost.localdomain> (raw)
Consolidate a bunch of C&P code that waits for the firmware to be ready.
Signed-off-by: Dan Williams <dcbw@redhat.com>
---
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 7a73f62..dcd14da 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -312,12 +312,28 @@ out:
return ret;
}
+static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition)
+{
+ u8 status;
+ unsigned long timeout;
+ int ret = 0;
+
+ timeout = jiffies + HZ;
+ while (1) {
+ status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
+ if (ret || (status & condition))
+ break;
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ mdelay(1);
+ }
+ return ret;
+}
+
static int if_sdio_card_to_host(struct if_sdio_card *card)
{
int ret;
- u8 status;
u16 size, type, chunk;
- unsigned long timeout;
lbs_deb_enter(LBS_DEB_SDIO);
@@ -332,19 +348,9 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
goto out;
}
- timeout = jiffies + HZ;
- while (1) {
- status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
- if (ret)
- goto out;
- if (status & IF_SDIO_IO_RDY)
- break;
- if (time_after(jiffies, timeout)) {
- ret = -ETIMEDOUT;
- goto out;
- }
- mdelay(1);
- }
+ ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+ if (ret)
+ goto out;
/*
* The transfer must be in one transaction or the firmware
@@ -411,8 +417,6 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
{
struct if_sdio_card *card;
struct if_sdio_packet *packet;
- unsigned long timeout;
- u8 status;
int ret;
unsigned long flags;
@@ -432,25 +436,15 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
sdio_claim_host(card->func);
- timeout = jiffies + HZ;
- while (1) {
- status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
- if (ret)
- goto release;
- if (status & IF_SDIO_IO_RDY)
- break;
- if (time_after(jiffies, timeout)) {
- ret = -ETIMEDOUT;
- goto release;
- }
- mdelay(1);
+ ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+ if (ret == 0) {
+ ret = sdio_writesb(card->func, card->ioport,
+ packet->buffer, packet->nb);
}
- ret = sdio_writesb(card->func, card->ioport,
- packet->buffer, packet->nb);
if (ret)
- goto release;
-release:
+ lbs_pr_err("error %d sending packet to firmware\n", ret);
+
sdio_release_host(card->func);
kfree(packet);
@@ -463,10 +457,11 @@ release:
/* Firmware */
/********************************************************************/
+#define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
+
static int if_sdio_prog_helper(struct if_sdio_card *card)
{
int ret;
- u8 status;
const struct firmware *fw;
unsigned long timeout;
u8 *chunk_buffer;
@@ -498,20 +493,9 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
size = fw->size;
while (size) {
- timeout = jiffies + HZ;
- while (1) {
- status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
- if (ret)
- goto release;
- if ((status & IF_SDIO_IO_RDY) &&
- (status & IF_SDIO_DL_RDY))
- break;
- if (time_after(jiffies, timeout)) {
- ret = -ETIMEDOUT;
- goto release;
- }
- mdelay(1);
- }
+ ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+ if (ret)
+ goto release;
chunk_size = min(size, (size_t)60);
@@ -581,7 +565,6 @@ out:
static int if_sdio_prog_real(struct if_sdio_card *card)
{
int ret;
- u8 status;
const struct firmware *fw;
unsigned long timeout;
u8 *chunk_buffer;
@@ -613,20 +596,9 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
size = fw->size;
while (size) {
- timeout = jiffies + HZ;
- while (1) {
- status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
- if (ret)
- goto release;
- if ((status & IF_SDIO_IO_RDY) &&
- (status & IF_SDIO_DL_RDY))
- break;
- if (time_after(jiffies, timeout)) {
- ret = -ETIMEDOUT;
- goto release;
- }
- mdelay(1);
- }
+ ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+ if (ret)
+ goto release;
req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
if (ret)
next reply other threads:[~2010-04-15 20:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-15 20:27 Dan Williams [this message]
2010-04-15 20:32 ` [PATCH 2/2] libertas: Davinci platforms need more time loading helper firmware Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271363264.10765.3.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=alagusankar@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).