From: Reinette Chatre <reinette.chatre@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
Wey-Yi Guy <wey-yi.w.guy@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>
Subject: [PATCH 16/21] iwlwifi: more code clean up for agn devices
Date: Fri, 16 Apr 2010 14:52:33 -0700 [thread overview]
Message-ID: <1271454758-14351-17-git-send-email-reinette.chatre@intel.com> (raw)
In-Reply-To: <1271454758-14351-1-git-send-email-reinette.chatre@intel.com>
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Since multiple new devices having similar uCode architecture and use same
registers address, remove more reference to 5000 series to eliminate the
confusion.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 42 +++++++-------
drivers/net/wireless/iwlwifi/iwl-agn-ucode.c | 34 ++++++------
drivers/net/wireless/iwlwifi/iwl-prph.h | 80 +++++++++++++-------------
3 files changed, 78 insertions(+), 78 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 3077eac..11661fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -167,7 +167,7 @@ static int iwlagn_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
tbl_dw_addr = priv->scd_base_addr +
- IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
+ IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
@@ -186,9 +186,9 @@ static void iwlagn_tx_queue_stop_scheduler(struct iwl_priv *priv, u16 txq_id)
/* Simply stop the queue, but don't change any configuration;
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
iwl_write_prph(priv,
- IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
- (0 << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
- (1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
+ IWLAGN_SCD_QUEUE_STATUS_BITS(txq_id),
+ (0 << IWLAGN_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
+ (1 << IWLAGN_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}
void iwlagn_set_wr_ptrs(struct iwl_priv *priv,
@@ -196,7 +196,7 @@ void iwlagn_set_wr_ptrs(struct iwl_priv *priv,
{
iwl_write_direct32(priv, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
- iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(txq_id), index);
+ iwl_write_prph(priv, IWLAGN_SCD_QUEUE_RDPTR(txq_id), index);
}
void iwlagn_tx_queue_set_status(struct iwl_priv *priv,
@@ -206,11 +206,11 @@ void iwlagn_tx_queue_set_status(struct iwl_priv *priv,
int txq_id = txq->q.id;
int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
- iwl_write_prph(priv, IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
- (active << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
- (tx_fifo_id << IWL50_SCD_QUEUE_STTS_REG_POS_TXF) |
- (1 << IWL50_SCD_QUEUE_STTS_REG_POS_WSL) |
- IWL50_SCD_QUEUE_STTS_REG_MSK);
+ iwl_write_prph(priv, IWLAGN_SCD_QUEUE_STATUS_BITS(txq_id),
+ (active << IWLAGN_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
+ (tx_fifo_id << IWLAGN_SCD_QUEUE_STTS_REG_POS_TXF) |
+ (1 << IWLAGN_SCD_QUEUE_STTS_REG_POS_WSL) |
+ IWLAGN_SCD_QUEUE_STTS_REG_MSK);
txq->sched_retry = scd_retry;
@@ -250,10 +250,10 @@ int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
iwlagn_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
/* Set this queue as a chain-building queue */
- iwl_set_bits_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, (1<<txq_id));
+ iwl_set_bits_prph(priv, IWLAGN_SCD_QUEUECHAIN_SEL, (1<<txq_id));
/* enable aggregations for the queue */
- iwl_set_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1<<txq_id));
+ iwl_set_bits_prph(priv, IWLAGN_SCD_AGGR_SEL, (1<<txq_id));
/* Place first TFD at index corresponding to start sequence number.
* Assumes that ssn_idx is valid (!= 0xFFF) */
@@ -263,16 +263,16 @@ int iwlagn_txq_agg_enable(struct iwl_priv *priv, int txq_id,
/* Set up Tx window size and frame limit for this queue */
iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL50_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
+ IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
sizeof(u32),
((SCD_WIN_SIZE <<
- IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
- IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
+ IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
+ IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
((SCD_FRAME_LIMIT <<
- IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
+ IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
- iwl_set_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
+ iwl_set_bits_prph(priv, IWLAGN_SCD_INTERRUPT_MASK, (1 << txq_id));
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
iwlagn_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
@@ -298,14 +298,14 @@ int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
iwlagn_tx_queue_stop_scheduler(priv, txq_id);
- iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id));
+ iwl_clear_bits_prph(priv, IWLAGN_SCD_AGGR_SEL, (1 << txq_id));
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
/* supposes that ssn_idx is valid (!= 0xFFF) */
iwlagn_set_wr_ptrs(priv, txq_id, ssn_idx);
- iwl_clear_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
+ iwl_clear_bits_prph(priv, IWLAGN_SCD_INTERRUPT_MASK, (1 << txq_id));
iwl_txq_ctx_deactivate(priv, txq_id);
iwlagn_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
@@ -318,7 +318,7 @@ int iwlagn_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
*/
void iwlagn_txq_set_sched(struct iwl_priv *priv, u32 mask)
{
- iwl_write_prph(priv, IWL50_SCD_TXFACT, mask);
+ iwl_write_prph(priv, IWLAGN_SCD_TXFACT, mask);
}
static inline int get_queue_from_ac(u16 ac)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index 059b70e..ae476c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -329,19 +329,19 @@ int iwlagn_alive_notify(struct iwl_priv *priv)
spin_lock_irqsave(&priv->lock, flags);
- priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR);
- a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET;
- for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET;
+ priv->scd_base_addr = iwl_read_prph(priv, IWLAGN_SCD_SRAM_BASE_ADDR);
+ a = priv->scd_base_addr + IWLAGN_SCD_CONTEXT_DATA_OFFSET;
+ for (; a < priv->scd_base_addr + IWLAGN_SCD_TX_STTS_BITMAP_OFFSET;
a += 4)
iwl_write_targ_mem(priv, a, 0);
- for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET;
+ for (; a < priv->scd_base_addr + IWLAGN_SCD_TRANSLATE_TBL_OFFSET;
a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < priv->scd_base_addr +
- IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
+ IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
iwl_write_targ_mem(priv, a, 0);
- iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR,
+ iwl_write_prph(priv, IWLAGN_SCD_DRAM_BASE_ADDR,
priv->scd_bc_tbls.dma >> 10);
/* Enable DMA channel */
@@ -355,28 +355,28 @@ int iwlagn_alive_notify(struct iwl_priv *priv)
iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
- iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL,
- IWL50_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num));
- iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0);
+ iwl_write_prph(priv, IWLAGN_SCD_QUEUECHAIN_SEL,
+ IWLAGN_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num));
+ iwl_write_prph(priv, IWLAGN_SCD_AGGR_SEL, 0);
/* initiate the queues */
for (i = 0; i < priv->hw_params.max_txq_num; i++) {
- iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(i), 0);
+ iwl_write_prph(priv, IWLAGN_SCD_QUEUE_RDPTR(i), 0);
iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL50_SCD_CONTEXT_QUEUE_OFFSET(i), 0);
+ IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(i), 0);
iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL50_SCD_CONTEXT_QUEUE_OFFSET(i) +
+ IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(i) +
sizeof(u32),
((SCD_WIN_SIZE <<
- IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
- IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
+ IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
+ IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
((SCD_FRAME_LIMIT <<
- IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
+ IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
}
- iwl_write_prph(priv, IWL50_SCD_INTERRUPT_MASK,
+ iwl_write_prph(priv, IWLAGN_SCD_INTERRUPT_MASK,
IWL_MASK(0, priv->hw_params.max_txq_num));
/* Activate all Tx DMA/FIFO channels */
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 5944de7..b1f101c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -529,48 +529,48 @@
#define IWL_SCD_TXFIFO_POS_RA (4)
#define IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
-/* 5000 SCD */
-#define IWL50_SCD_QUEUE_STTS_REG_POS_TXF (0)
-#define IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
-#define IWL50_SCD_QUEUE_STTS_REG_POS_WSL (4)
-#define IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
-#define IWL50_SCD_QUEUE_STTS_REG_MSK (0x00FF0000)
-
-#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
-#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
-#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
-#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
-#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
-#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
-#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
-#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
-
-#define IWL50_SCD_CONTEXT_DATA_OFFSET (0x600)
-#define IWL50_SCD_TX_STTS_BITMAP_OFFSET (0x7B1)
-#define IWL50_SCD_TRANSLATE_TBL_OFFSET (0x7E0)
-
-#define IWL50_SCD_CONTEXT_QUEUE_OFFSET(x)\
- (IWL50_SCD_CONTEXT_DATA_OFFSET + ((x) * 8))
-
-#define IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
- ((IWL50_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffc)
-
-#define IWL50_SCD_QUEUECHAIN_SEL_ALL(x) (((1<<(x)) - 1) &\
+/* agn SCD */
+#define IWLAGN_SCD_QUEUE_STTS_REG_POS_TXF (0)
+#define IWLAGN_SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
+#define IWLAGN_SCD_QUEUE_STTS_REG_POS_WSL (4)
+#define IWLAGN_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
+#define IWLAGN_SCD_QUEUE_STTS_REG_MSK (0x00FF0000)
+
+#define IWLAGN_SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
+#define IWLAGN_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
+#define IWLAGN_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
+#define IWLAGN_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
+#define IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
+#define IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
+#define IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
+#define IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
+
+#define IWLAGN_SCD_CONTEXT_DATA_OFFSET (0x600)
+#define IWLAGN_SCD_TX_STTS_BITMAP_OFFSET (0x7B1)
+#define IWLAGN_SCD_TRANSLATE_TBL_OFFSET (0x7E0)
+
+#define IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(x)\
+ (IWLAGN_SCD_CONTEXT_DATA_OFFSET + ((x) * 8))
+
+#define IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
+ ((IWLAGN_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffc)
+
+#define IWLAGN_SCD_QUEUECHAIN_SEL_ALL(x) (((1<<(x)) - 1) &\
(~(1<<IWL_CMD_QUEUE_NUM)))
-#define IWL50_SCD_BASE (PRPH_BASE + 0xa02c00)
-
-#define IWL50_SCD_SRAM_BASE_ADDR (IWL50_SCD_BASE + 0x0)
-#define IWL50_SCD_DRAM_BASE_ADDR (IWL50_SCD_BASE + 0x8)
-#define IWL50_SCD_AIT (IWL50_SCD_BASE + 0x0c)
-#define IWL50_SCD_TXFACT (IWL50_SCD_BASE + 0x10)
-#define IWL50_SCD_ACTIVE (IWL50_SCD_BASE + 0x14)
-#define IWL50_SCD_QUEUE_WRPTR(x) (IWL50_SCD_BASE + 0x18 + (x) * 4)
-#define IWL50_SCD_QUEUE_RDPTR(x) (IWL50_SCD_BASE + 0x68 + (x) * 4)
-#define IWL50_SCD_QUEUECHAIN_SEL (IWL50_SCD_BASE + 0xe8)
-#define IWL50_SCD_AGGR_SEL (IWL50_SCD_BASE + 0x248)
-#define IWL50_SCD_INTERRUPT_MASK (IWL50_SCD_BASE + 0x108)
-#define IWL50_SCD_QUEUE_STATUS_BITS(x) (IWL50_SCD_BASE + 0x10c + (x) * 4)
+#define IWLAGN_SCD_BASE (PRPH_BASE + 0xa02c00)
+
+#define IWLAGN_SCD_SRAM_BASE_ADDR (IWLAGN_SCD_BASE + 0x0)
+#define IWLAGN_SCD_DRAM_BASE_ADDR (IWLAGN_SCD_BASE + 0x8)
+#define IWLAGN_SCD_AIT (IWLAGN_SCD_BASE + 0x0c)
+#define IWLAGN_SCD_TXFACT (IWLAGN_SCD_BASE + 0x10)
+#define IWLAGN_SCD_ACTIVE (IWLAGN_SCD_BASE + 0x14)
+#define IWLAGN_SCD_QUEUE_WRPTR(x) (IWLAGN_SCD_BASE + 0x18 + (x) * 4)
+#define IWLAGN_SCD_QUEUE_RDPTR(x) (IWLAGN_SCD_BASE + 0x68 + (x) * 4)
+#define IWLAGN_SCD_QUEUECHAIN_SEL (IWLAGN_SCD_BASE + 0xe8)
+#define IWLAGN_SCD_AGGR_SEL (IWLAGN_SCD_BASE + 0x248)
+#define IWLAGN_SCD_INTERRUPT_MASK (IWLAGN_SCD_BASE + 0x108)
+#define IWLAGN_SCD_QUEUE_STATUS_BITS(x) (IWLAGN_SCD_BASE + 0x10c + (x) * 4)
/*********************** END TX SCHEDULER *************************************/
--
1.6.3.3
next prev parent reply other threads:[~2010-04-16 21:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-16 21:52 [PATCH 00/21] iwlwifi updates for 2.6.35 Reinette Chatre
2010-04-16 21:52 ` [PATCH 01/21] iwlwifi: set correct single/dual stream mask Reinette Chatre
2010-04-16 21:52 ` [PATCH 02/21] iwlwifi: remove scan_bands logic Reinette Chatre
2010-04-16 21:52 ` [PATCH 03/21] iwlwifi: correct atomic bitops usage Reinette Chatre
2010-04-16 21:52 ` [PATCH 04/21] iwlwifi: remove next_scan_jiffies Reinette Chatre
2010-04-16 21:52 ` [PATCH 05/21] iwlwifi: remove scan_pass_start Reinette Chatre
2010-04-16 21:52 ` [PATCH 06/21] iwlwifi: rename priv->scan to priv->scan_cmd Reinette Chatre
2010-04-16 21:52 ` [PATCH 07/21] iwlwifi: trigger scan synchronously Reinette Chatre
2010-04-16 21:52 ` [PATCH 08/21] iwlwifi: more generic eeprom defines Reinette Chatre
2010-04-16 21:52 ` [PATCH 09/21] iwlwifi: bring up 6000 Series 2x2 AGN Gen2 adapters Reinette Chatre
2010-04-16 21:52 ` [PATCH 10/21] iwlwifi: remove duplicated debug functions Reinette Chatre
2010-04-16 21:52 ` [PATCH 11/21] iwlwifi: add debugfs ops to iwlwifi Reinette Chatre
2010-04-16 21:52 ` [PATCH 12/21] iwlwifi: remove redundant iwl_dump_lq_cmd() Reinette Chatre
2010-04-16 21:52 ` [PATCH 13/21] iwlwifi: add hw revision for 6000g2 NIC Reinette Chatre
2010-04-16 21:52 ` [PATCH 14/21] iwlwifi: PA type for 6000g2 series Reinette Chatre
2010-04-16 21:52 ` [PATCH 15/21] iwlwifi: sanity check for turn on aggregation tid Reinette Chatre
2010-04-16 21:52 ` Reinette Chatre [this message]
2010-04-16 21:52 ` [PATCH 17/21] iwlwifi: make BT coex config a virtual method Reinette Chatre
2010-04-16 21:52 ` [PATCH 18/21] iwlwifi: rename TX_CMD_FLG_BT_DIS_MSK Reinette Chatre
2010-04-16 21:52 ` [PATCH 19/21] iwlwifi: don't check monitor for scanning Reinette Chatre
2010-04-16 21:52 ` [PATCH 20/21] iwlwifi: remove monitor check Reinette Chatre
2010-04-16 21:52 ` [PATCH 21/21] iwlwifi: make scan antenna forcing more generic Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271454758-14351-17-git-send-email-reinette.chatre@intel.com \
--to=reinette.chatre@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=wey-yi.w.guy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).