linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dcbw@redhat.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [wt PATCH 4/16] libertas: remove unused indirect TPC_CFG command leftovers
Date: Tue, 27 Jul 2010 12:56:44 -0700	[thread overview]
Message-ID: <1280260604.19686.17.camel@dcbw.foobar.com> (raw)
In-Reply-To: <1280260357.19686.13.camel@dcbw.foobar.com>

These were no longer used but were left around; Transmit Power
Control is done through the lbs_set_tpc_cfg() function.

Signed-off-by: Dan Williams <dcbw@redhat.com>
---
 drivers/net/wireless/libertas/cmd.c     |   12 ------------
 drivers/net/wireless/libertas/cmdresp.c |    7 -------
 drivers/net/wireless/libertas/host.h    |    1 -
 3 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 2aa362f..76a892e 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1217,18 +1217,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		ret = 0;
 		goto done;
 
-	case CMD_802_11_TPC_CFG:
-		cmdptr->command = cpu_to_le16(CMD_802_11_TPC_CFG);
-		cmdptr->size =
-		    cpu_to_le16(sizeof(struct cmd_ds_802_11_tpc_cfg) +
-				     sizeof(struct cmd_header));
-
-		memmove(&cmdptr->params.tpccfg,
-			pdata_buf, sizeof(struct cmd_ds_802_11_tpc_cfg));
-
-		ret = 0;
-		break;
-
 #ifdef CONFIG_LIBERTAS_MESH
 
 	case CMD_BT_ACCESS:
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 35b8ceb..6bc40c6 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -125,13 +125,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 	case CMD_RET(CMD_802_11_BEACON_STOP):
 		break;
 
-	case CMD_RET(CMD_802_11_TPC_CFG):
-		spin_lock_irqsave(&priv->driver_lock, flags);
-		memmove((void *)priv->cur_cmd->callback_arg, &resp->params.tpccfg,
-			sizeof(struct cmd_ds_802_11_tpc_cfg));
-		spin_unlock_irqrestore(&priv->driver_lock, flags);
-		break;
-
 	case CMD_RET(CMD_BT_ACCESS):
 		spin_lock_irqsave(&priv->driver_lock, flags);
 		if (priv->cur_cmd->callback_arg)
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index ad46c36..a15f5d0 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -965,7 +965,6 @@ struct cmd_ds_command {
 		struct cmd_ds_bbp_reg_access bbpreg;
 		struct cmd_ds_rf_reg_access rfreg;
 
-		struct cmd_ds_802_11_tpc_cfg tpccfg;
 		struct cmd_ds_802_11_afc afc;
 		struct cmd_ds_802_11_led_ctrl ledgpio;
 
-- 
1.7.1.1



  parent reply	other threads:[~2010-07-27 17:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-27 19:52 [wt PATCH 0/16] libertas: finish conversion to direct command architecture Dan Williams
2010-07-27 19:54 ` [wt PATCH 1/16] libertas: clean up MONITOR_MODE command Dan Williams
2010-07-27 19:55 ` [wt PATCH 2/16] libertas: clean up RSSI command Dan Williams
2010-07-27 19:56 ` [wt PATCH 3/16] libertas: convert 11D_DOMAIN_INFO to a direct command Dan Williams
2010-07-27 19:56 ` Dan Williams [this message]
2010-07-27 19:57 ` [wt PATCH 5/16] libertas: remove unused Automatic Frequency Control command Dan Williams
2010-07-27 19:58 ` [wt PATCH 6/16] libertas: remove Beacon Control Dan Williams
2010-07-27 19:59 ` [wt PATCH 7/16] libertas: convert LED_GPIO_CTRL to a direct command Dan Williams
2010-07-27 20:01 ` [wt PATCH 8/16] libertas: convert register access to direct commands Dan Williams
2010-07-27 20:01 ` [wt PATCH 9/16] libertas: convert Mesh Blinding Table access to a direct command Dan Williams
2010-07-27 20:03 ` [wt PATCH 10/16] libertas: convert CMD_FWT_ACCESS " Dan Williams
2010-07-27 20:05 ` [wt PATCH 11/16] libertas: remove unused indirect command response handler Dan Williams
2010-07-27 20:08 ` [wt PATCH 12/16] libertas: convert PS_MODE to a direct command Dan Williams
2010-07-27 20:15 ` [wt PATCH 13/16] libertas: convert DEEP_SLEEP timer " Dan Williams
2010-07-27 20:15 ` [wt PATCH 14/16] libertas: kill unused lbs_prepare_and_send_command() Dan Williams
2010-07-27 20:16 ` [wt PATCH 15/16] libertas: rename lbs_get_cmd_ctrl_node() to lbs_get_free_cmd_node() Dan Williams
2010-07-27 20:17 ` [wt PATCH 16/16] libertas: remove unused cmd_pending waitq Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1280260604.19686.17.camel@dcbw.foobar.com \
    --to=dcbw@redhat.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --subject='Re: [wt PATCH 4/16] libertas: remove unused indirect TPC_CFG command leftovers' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).