From: Kalle Valo <kvalo@adurom.com>
To: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@adurom.com>
Subject: [PATCH 1/3] wl1251: create a copy of wl12xx_80211.h for wl1251
Date: Sun, 10 Oct 2010 11:28:31 +0300 [thread overview]
Message-ID: <1286699313-7774-2-git-send-email-kvalo@adurom.com> (raw)
In-Reply-To: <1286699313-7774-1-git-send-email-kvalo@adurom.com>
In preparation of moving wl1251 out from drivers/net/wireless/wl12xx
create a separate copy of wl12xx_80211.h.
This file should not even exist, we should instead use generic ieee80211
definitions. This will be fixed in the future so that the file can
be removed.
Signed-off-by: Kalle Valo <kvalo@adurom.com>
---
drivers/net/wireless/wl1251/wl12xx_80211.h | 156 ++++++++++++++++++++++++++++
1 files changed, 156 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/wl1251/wl12xx_80211.h
diff --git a/drivers/net/wireless/wl1251/wl12xx_80211.h b/drivers/net/wireless/wl1251/wl12xx_80211.h
new file mode 100644
index 0000000..1846280
--- /dev/null
+++ b/drivers/net/wireless/wl1251/wl12xx_80211.h
@@ -0,0 +1,156 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define COUNTRY_STRING_LEN 3
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 da[ETH_ALEN];
+ u8 sa[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __packed;
+
+struct wl12xx_ie_header {
+ u8 id;
+ u8 len;
+} __packed;
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+ struct wl12xx_ie_header header;
+ char ssid[IW_ESSID_MAX_SIZE];
+} __packed;
+
+struct wl12xx_ie_rates {
+ struct wl12xx_ie_header header;
+ u8 rates[MAX_SUPPORTED_RATES];
+} __packed;
+
+struct wl12xx_ie_ds_params {
+ struct wl12xx_ie_header header;
+ u8 channel;
+} __packed;
+
+struct country_triplet {
+ u8 channel;
+ u8 num_channels;
+ u8 max_tx_power;
+} __packed;
+
+struct wl12xx_ie_country {
+ struct wl12xx_ie_header header;
+ u8 country_string[COUNTRY_STRING_LEN];
+ struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __packed;
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __packed;
+
+struct wl12xx_null_data_template {
+ struct ieee80211_header header;
+} __packed;
+
+struct wl12xx_ps_poll_template {
+ __le16 fc;
+ __le16 aid;
+ u8 bssid[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+} __packed;
+
+struct wl12xx_qos_null_data_template {
+ struct ieee80211_header header;
+ __le16 qos_ctl;
+} __packed;
+
+struct wl12xx_probe_req_template {
+ struct ieee80211_header header;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+} __packed;
+
+
+struct wl12xx_probe_resp_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __packed;
+
+#endif
--
1.7.0.4
next prev parent reply other threads:[~2010-10-10 8:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-10 8:28 [PATCH 0/3] wl1251: move to a separate directory Kalle Valo
2010-10-10 8:28 ` Kalle Valo [this message]
2010-10-10 8:28 ` [PATCH 2/3] wl1251: move to it's own directory Kalle Valo
2010-10-10 8:28 ` [PATCH 3/3] wl1251: update the new location to the maintainers file Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286699313-7774-2-git-send-email-kvalo@adurom.com \
--to=kvalo@adurom.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).