From: Vasanthakumar Thiagarajan <vasanth@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH 20/26] ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal
Date: Tue, 30 Nov 2010 23:32:49 -0800 [thread overview]
Message-ID: <1291188775-13707-21-git-send-email-vasanth@atheros.com> (raw)
In-Reply-To: <1291188775-13707-1-git-send-email-vasanth@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 4c94c9e..f218613 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -723,7 +723,9 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
val = REG_READ(ah, AR_ENT_OTP);
ath_print(common, ATH_DBG_CALIBRATE, "ath9k: AR_ENT_OTP 0x%x\n", val);
- if (val & AR_ENT_OTP_CHAIN2_DISABLE)
+ if (AR_SREV_9485(ah))
+ ar9003_hw_set_chain_masks(ah, 0x1, 0x1);
+ else if (val & AR_ENT_OTP_CHAIN2_DISABLE)
ar9003_hw_set_chain_masks(ah, 0x3, 0x3);
else
/*
--
1.7.0.4
next prev parent reply other threads:[~2010-12-01 7:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 7:32 [PATCH 00/26] Add support for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 01/26] ath9k_hw: Define hw version macros " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 02/26] ath9k_hw: Add initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 03/26] ath9k_hw: Enable hw initialization " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 04/26] ath9k_hw: Initialize mode registers " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 05/26] ath9k_hw: Initialize tx/rx gain table from initvals.h " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 06/26] ath9k_hw: Eeeprom changes " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 07/26] ath9k_hw: Disable LDPC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 08/26] ath9k: Disable TX STBC " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 09/26] ath9k: Enable extended synch for AR9485 to fix L0s recovery issue Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 10/26] ath9k: Configure pll control for AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:39 ` Felix Fietkau
2010-12-02 5:05 ` Vasanthakumar Thiagarajan
2010-12-02 5:09 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 11/26] ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array " Vasanthakumar Thiagarajan
2010-12-01 16:45 ` Felix Fietkau
2010-12-02 5:43 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 12/26] ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 13/26] ath9k: Read spur channel information from eeprom for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 14/26] ath9k_hw: Configure xpa bias level " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 15/26] ath9k_hw: Read and configure antenna diversity control " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 16/26] ath9k_hw: Configure attenuation control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:50 ` Felix Fietkau
2010-12-02 5:13 ` Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 17/26] ath9k_hw: Configure internal regulator for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 18/26] ath9k_hw: Read and configure turnning caps to regulate freq accuracy Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 19/26] ath9k_hw: Configure power control only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:51 ` Felix Fietkau
2010-12-01 7:32 ` Vasanthakumar Thiagarajan [this message]
2010-12-01 7:32 ` [PATCH 21/26] ath9k_hw: Define IQcal correction coefficient registers using index Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 22/26] ath9k_hw: Add IQ cal changes for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 23/26] ath9k_hw: Program appropriate register for temperature compensation cal " Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 24/26] ath9k_hw: Setup paprd only for chain 0 on AR9485 Vasanthakumar Thiagarajan
2010-12-01 16:52 ` Felix Fietkau
2010-12-01 7:32 ` [PATCH 25/26] ath9k_hw: Disable MRC CCK for AR9485 Vasanthakumar Thiagarajan
2010-12-01 7:32 ` [PATCH 26/26] ath9k: Add device id of AR9485 to pci table Vasanthakumar Thiagarajan
2010-12-01 7:52 ` [PATCH 00/26] Add support for AR9485 Luis R. Rodriguez
2010-12-01 8:36 ` Vasanthakumar Thiagarajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291188775-13707-21-git-send-email-vasanth@atheros.com \
--to=vasanth@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).