From: Ming Lei <ming.lei@canonical.com>
To: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org, Ming Lei <ming.lei@canonical.com>,
ath9k-devel@lists.ath9k.org,
"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>,
Jouni Malinen <jouni@qca.qualcomm.com>,
Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>,
Senthil Balasubramanian <senthilb@qca.qualcomm.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH -next v1] wireless: ath9k-htc: only load firmware in need
Date: Tue, 21 Aug 2012 16:04:27 +0800 [thread overview]
Message-ID: <1345536267-9449-1-git-send-email-ming.lei@canonical.com> (raw)
It is not necessary to hold the firmware memory during the whole
driver lifetime, and obviously it does waste memory. Suppose there
are 4 ath9k-htc usb dongles working, kernel has to consume about
4*50KBytes RAM to cache firmware for all dongles. After applying the
patch, kernel only caches one single firmware image in RAM for
all ath9k-htc devices just during system suspend/resume cycle.
When system is ready for loading firmware, ath9k-htc can request
the loading from usersapce. During system resume, ath9k-htc still
can load the firmware which was cached in kernel memory before
system suspend.
Cc: ath9k-devel@lists.ath9k.org
Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
---
v1:
fix double free of firmware in failue path of
ath9k_hif_usb_firmware_cb
This patch(just behaviour instead of build) depends on firmware
cache patch set which has entered -next tree already via driver core
tree.
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 33 ++++++++++++++++++++----------
drivers/net/wireless/ath/ath9k/hif_usb.h | 4 +++-
2 files changed, 25 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index aa327ad..ee6e50a 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -973,8 +973,8 @@ static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
{
int transfer, err;
- const void *data = hif_dev->firmware->data;
- size_t len = hif_dev->firmware->size;
+ const void *data = hif_dev->fw_data;
+ size_t len = hif_dev->fw_size;
u32 addr = AR9271_FIRMWARE;
u8 *buf = kzalloc(4096, GFP_KERNEL);
u32 firm_offset;
@@ -1017,7 +1017,7 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
return -EIO;
dev_info(&hif_dev->udev->dev, "ath9k_htc: Transferred FW: %s, size: %ld\n",
- hif_dev->fw_name, (unsigned long) hif_dev->firmware->size);
+ hif_dev->fw_name, (unsigned long) hif_dev->fw_size);
return 0;
}
@@ -1099,11 +1099,11 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context)
hif_dev->htc_handle = ath9k_htc_hw_alloc(hif_dev, &hif_usb,
&hif_dev->udev->dev);
- if (hif_dev->htc_handle == NULL) {
- goto err_fw;
- }
+ if (hif_dev->htc_handle == NULL)
+ goto err_dev_alloc;
- hif_dev->firmware = fw;
+ hif_dev->fw_data = fw->data;
+ hif_dev->fw_size = fw->size;
/* Proceed with initialization */
@@ -1121,6 +1121,8 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context)
goto err_htc_hw_init;
}
+ release_firmware(fw);
+ hif_dev->flags |= HIF_USB_READY;
complete(&hif_dev->fw_done);
return;
@@ -1129,8 +1131,8 @@ err_htc_hw_init:
ath9k_hif_usb_dev_deinit(hif_dev);
err_dev_init:
ath9k_htc_hw_free(hif_dev->htc_handle);
+err_dev_alloc:
release_firmware(fw);
- hif_dev->firmware = NULL;
err_fw:
ath9k_hif_usb_firmware_fail(hif_dev);
}
@@ -1277,11 +1279,10 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
wait_for_completion(&hif_dev->fw_done);
- if (hif_dev->firmware) {
+ if (hif_dev->flags & HIF_USB_READY) {
ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
ath9k_htc_hw_free(hif_dev->htc_handle);
ath9k_hif_usb_dev_deinit(hif_dev);
- release_firmware(hif_dev->firmware);
}
usb_set_intfdata(interface, NULL);
@@ -1317,13 +1318,23 @@ static int ath9k_hif_usb_resume(struct usb_interface *interface)
struct hif_device_usb *hif_dev = usb_get_intfdata(interface);
struct htc_target *htc_handle = hif_dev->htc_handle;
int ret;
+ const struct firmware *fw;
ret = ath9k_hif_usb_alloc_urbs(hif_dev);
if (ret)
return ret;
- if (hif_dev->firmware) {
+ if (hif_dev->flags & HIF_USB_READY) {
+ /* request cached firmware during suspend/resume cycle */
+ ret = request_firmware(&fw, hif_dev->fw_name,
+ &hif_dev->udev->dev);
+ if (ret)
+ goto fail_resume;
+
+ hif_dev->fw_data = fw->data;
+ hif_dev->fw_size = fw->size;
ret = ath9k_hif_usb_download_fw(hif_dev);
+ release_firmware(fw);
if (ret)
goto fail_resume;
} else {
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 487ff65..51496e7 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -85,12 +85,14 @@ struct cmd_buf {
};
#define HIF_USB_START BIT(0)
+#define HIF_USB_READY BIT(1)
struct hif_device_usb {
struct usb_device *udev;
struct usb_interface *interface;
const struct usb_device_id *usb_device_id;
- const struct firmware *firmware;
+ const void *fw_data;
+ size_t fw_size;
struct completion fw_done;
struct htc_target *htc_handle;
struct hif_usb_tx tx;
--
1.7.9.5
next reply other threads:[~2012-08-21 8:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 8:04 Ming Lei [this message]
2012-09-01 5:11 ` [PATCH -next v1] wireless: ath9k-htc: only load firmware in need Ming Lei
2012-09-10 10:23 ` Mohammed Shafi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345536267-9449-1-git-send-email-ming.lei@canonical.com \
--to=ming.lei@canonical.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=jouni@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@qca.qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=senthilb@qca.qualcomm.com \
--cc=vthiagar@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).