From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Wojciech.Dubowik@neratec.com, Johannes Berg <johannes.berg@intel.com>
Subject: [PATCH] mac80211: fix auth/assoc timeout handling
Date: Wed, 13 Feb 2013 23:55:04 +0100 [thread overview]
Message-ID: <1360796104-32455-1-git-send-email-johannes@sipsolutions.net> (raw)
From: Johannes Berg <johannes.berg@intel.com>
In my commit 1672c0e31917f49d31d30d79067103432bc20cc7
("mac80211: start auth/assoc timeout on frame status")
I broke auth/assoc timeout handling: in case we wait
for the TX status, it now leaves the timeout field set
to 0, which is a valid time and can compare as being
before now ("jiffies"). Thus, if the work struct runs
for some other reason, the auth/assoc is treated as
having timed out.
Fix this by introducing a separate "timeout_started"
variable that tracks whether the timeout has started
and is checked before timing out.
Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/ieee80211_i.h | 2 ++
net/mac80211/mlme.c | 23 +++++++++++++++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 959888c..815e019 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -343,6 +343,7 @@ struct ieee80211_mgd_auth_data {
u8 key[WLAN_KEY_LEN_WEP104];
u8 key_len, key_idx;
bool done;
+ bool timeout_started;
u16 sae_trans, sae_status;
size_t data_len;
@@ -364,6 +365,7 @@ struct ieee80211_mgd_assoc_data {
bool wmm, uapsd;
bool have_beacon, need_beacon;
bool synced;
+ bool timeout_started;
u8 ap_ht_param;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7d4cde7..cafefb2 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1999,6 +1999,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
sdata_info(sdata, "authenticated\n");
ifmgd->auth_data->done = true;
ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
+ ifmgd->auth_data->timeout_started = true;
run_again(ifmgd, ifmgd->auth_data->timeout);
if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
@@ -2333,6 +2334,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
"%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
mgmt->sa, tu, ms);
assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
+ assoc_data->timeout_started = true;
if (ms > IEEE80211_ASSOC_TIMEOUT)
run_again(ifmgd, assoc_data->timeout);
return RX_MGMT_NONE;
@@ -2456,6 +2458,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
sdata_info(sdata, "direct probe responded\n");
ifmgd->auth_data->tries = 0;
ifmgd->auth_data->timeout = jiffies;
+ ifmgd->auth_data->timeout_started = true;
run_again(ifmgd, ifmgd->auth_data->timeout);
}
}
@@ -2541,6 +2544,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
}
/* continue assoc process */
ifmgd->assoc_data->timeout = jiffies;
+ ifmgd->assoc_data->timeout_started = true;
run_again(ifmgd, ifmgd->assoc_data->timeout);
return;
}
@@ -2933,7 +2937,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ ifmgd->auth_data->timeout_started = true;
run_again(ifmgd, auth_data->timeout);
+ } else {
+ auth_data->timeout_started = false;
}
return 0;
@@ -2967,7 +2974,10 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
+ assoc_data->timeout_started = true;
run_again(&sdata->u.mgd, assoc_data->timeout);
+ } else {
+ assoc_data->timeout_started = false;
}
return 0;
@@ -3006,6 +3016,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
} else {
ifmgd->auth_data->timeout = jiffies - 1;
}
+ ifmgd->auth_data->timeout_started = true;
} else if (ifmgd->assoc_data &&
(ieee80211_is_assoc_req(fc) ||
ieee80211_is_reassoc_req(fc))) {
@@ -3016,10 +3027,11 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
} else {
ifmgd->assoc_data->timeout = jiffies - 1;
}
+ ifmgd->assoc_data->timeout_started = true;
}
}
- if (ifmgd->auth_data &&
+ if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
time_after(jiffies, ifmgd->auth_data->timeout)) {
if (ifmgd->auth_data->done) {
/*
@@ -3038,10 +3050,10 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
cfg80211_send_auth_timeout(sdata->dev, bssid);
mutex_lock(&ifmgd->mtx);
}
- } else if (ifmgd->auth_data)
+ } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
run_again(ifmgd, ifmgd->auth_data->timeout);
- if (ifmgd->assoc_data &&
+ if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
time_after(jiffies, ifmgd->assoc_data->timeout)) {
if ((ifmgd->assoc_data->need_beacon &&
!ifmgd->assoc_data->have_beacon) ||
@@ -3056,7 +3068,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
cfg80211_send_assoc_timeout(sdata->dev, bssid);
mutex_lock(&ifmgd->mtx);
}
- } else if (ifmgd->assoc_data)
+ } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
run_again(ifmgd, ifmgd->assoc_data->timeout);
if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
@@ -4031,6 +4043,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
sdata_info(sdata, "waiting for beacon from %pM\n",
ifmgd->bssid);
assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
+ assoc_data->timeout_started = true;
assoc_data->need_beacon = true;
} else if (beacon_ies) {
const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
@@ -4046,6 +4059,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
}
assoc_data->have_beacon = true;
assoc_data->timeout = jiffies;
+ assoc_data->timeout_started = true;
if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
@@ -4055,6 +4069,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
}
} else {
assoc_data->timeout = jiffies;
+ assoc_data->timeout_started = true;
}
rcu_read_unlock();
--
1.8.0
reply other threads:[~2013-02-13 22:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360796104-32455-1-git-send-email-johannes@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=Wojciech.Dubowik@neratec.com \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).