From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-gw2-out.broadcom.com ([216.31.210.63]:26251 "EHLO mail-gw2-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754585AbaELIrr (ORCPT ); Mon, 12 May 2014 04:47:47 -0400 From: Arend van Spriel To: "John W. Linville" CC: linux-wireless , Arend van Spriel Subject: [PATCH 13/14] brcmfmac: handle 80MHz chanspecs in construct_reg_info() function Date: Mon, 12 May 2014 10:47:38 +0200 Message-ID: <1399884459-5048-14-git-send-email-arend@broadcom.com> (sfid-20140512_104758_448390_6577D4AF) In-Reply-To: <1399884459-5048-1-git-send-email-arend@broadcom.com> References: <1399884459-5048-1-git-send-email-arend@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: The device is queried about the usability of channels, but it did not take 80MHz channels into consideration. This patch adds processing those chanspecs and clear the NO_80MHZ flag for those control/primary channels. Reviewed-by: Daniel (Deognyoun) Kim Reviewed-by: Franky Lin Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 21 +++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 2d7c77d..290fc09 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -5191,6 +5191,9 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, if (!(bw_cap[band] & WLC_BW_40MHZ_BIT) && ch.bw == BRCMU_CHAN_BW_40) continue; + if (!(bw_cap[band] & WLC_BW_80MHZ_BIT) && + ch.bw == BRCMU_CHAN_BW_80) + continue; update = false; for (j = 0; (j < *n_cnt && (*n_cnt < array_size)); j++) { if (band_chan_arr[j].hw_value == ch.chnum) { @@ -5207,10 +5210,13 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, ieee80211_channel_to_frequency(ch.chnum, band); band_chan_arr[index].hw_value = ch.chnum; - if (ch.bw == BRCMU_CHAN_BW_40) { - /* assuming the order is HT20, HT40 Upper, - * HT40 lower from chanspecs - */ + /* assuming the chanspecs order is HT20, + * HT40 upper, HT40 lower, and VHT80. + */ + if (ch.bw == BRCMU_CHAN_BW_80) { + band_chan_arr[index].flags &= + ~IEEE80211_CHAN_NO_80MHZ; + } else if (ch.bw == BRCMU_CHAN_BW_40) { ht40_flag = band_chan_arr[index].flags & IEEE80211_CHAN_NO_HT40; if (ch.sb == BRCMU_CHAN_SB_U) { @@ -5231,8 +5237,13 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, IEEE80211_CHAN_NO_HT40MINUS; } } else { + /* disable other bandwidths for now as mentioned + * order assure they are enabled for subsequent + * chanspecs. + */ band_chan_arr[index].flags = - IEEE80211_CHAN_NO_HT40; + IEEE80211_CHAN_NO_HT40 | + IEEE80211_CHAN_NO_80MHZ; ch.bw = BRCMU_CHAN_BW_20; cfg->d11inf.encchspec(&ch); channel = ch.chspec; -- 1.7.9.5