linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Oren Givon <oren.givon@intel.com>,
	Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 11/12] iwlwifi: add PCI IDs and add then new 3165 series
Date: Mon, 15 Sep 2014 08:10:47 +0300	[thread overview]
Message-ID: <1410757848-1827-11-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <5416742C.3070804@gmail.com>

From: Oren Givon <oren.givon@intel.com>

This change does the following:
1) Add a new 7265 series PCI ID
2) Add two new 3160 series PCI IDs
3) Add the new 3165 series PCI IDs and configurations

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-7000.c   | 16 ++++++++++++++++
 drivers/net/wireless/iwlwifi/iwl-config.h |  1 +
 drivers/net/wireless/iwlwifi/pcie/drv.c   |  7 +++++++
 3 files changed, 24 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index d67a37a..d53adc2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -83,6 +83,8 @@
 #define IWL7260_TX_POWER_VERSION	0xffff /* meaningless */
 #define IWL3160_NVM_VERSION		0x709
 #define IWL3160_TX_POWER_VERSION	0xffff /* meaningless */
+#define IWL3165_NVM_VERSION		0x709
+#define IWL3165_TX_POWER_VERSION	0xffff /* meaningless */
 #define IWL7265_NVM_VERSION		0x0a1d
 #define IWL7265_TX_POWER_VERSION	0xffff /* meaningless */
 
@@ -92,6 +94,9 @@
 #define IWL3160_FW_PRE "iwlwifi-3160-"
 #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode"
 
+#define IWL3165_FW_PRE "iwlwifi-3165-"
+#define IWL3165_MODULE_FIRMWARE(api) IWL3165_FW_PRE __stringify(api) ".ucode"
+
 #define IWL7265_FW_PRE "iwlwifi-7265-"
 #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode"
 
@@ -213,6 +218,16 @@ static const struct iwl_pwr_tx_backoff iwl7265_pwr_tx_backoffs[] = {
 	{0},
 };
 
+const struct iwl_cfg iwl3165_2ac_cfg = {
+	.name = "Intel(R) Dual Band Wireless AC 3165",
+	.fw_name_pre = IWL3165_FW_PRE,
+	IWL_DEVICE_7000,
+	.ht_params = &iwl7000_ht_params,
+	.nvm_ver = IWL3165_NVM_VERSION,
+	.nvm_calib_ver = IWL3165_TX_POWER_VERSION,
+	.pwr_tx_backoffs = iwl7265_pwr_tx_backoffs,
+};
+
 const struct iwl_cfg iwl7265_2ac_cfg = {
 	.name = "Intel(R) Dual Band Wireless AC 7265",
 	.fw_name_pre = IWL7265_FW_PRE,
@@ -245,4 +260,5 @@ const struct iwl_cfg iwl7265_n_cfg = {
 
 MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
 MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL3165_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
 MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 942c99b..3d7cc37 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -337,6 +337,7 @@ extern const struct iwl_cfg iwl7260_n_cfg;
 extern const struct iwl_cfg iwl3160_2ac_cfg;
 extern const struct iwl_cfg iwl3160_2n_cfg;
 extern const struct iwl_cfg iwl3160_n_cfg;
+extern const struct iwl_cfg iwl3165_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2ac_cfg;
 extern const struct iwl_cfg iwl7265_2n_cfg;
 extern const struct iwl_cfg iwl7265_n_cfg;
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 98950e4..8bb8305 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -352,11 +352,17 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)},
 	{IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x08B4, 0x8370, iwl3160_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x08B4, 0x8272, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x1070, iwl3160_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x08B3, 0x1170, iwl3160_2ac_cfg)},
 
+/* 3165 Series */
+	{IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)},
+
 /* 7265 Series */
 	{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)},
@@ -378,6 +384,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x900A, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
-- 
1.9.1


  parent reply	other threads:[~2014-09-15  5:11 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-15  5:07 pull request: iwlwifi-next 2014-09-15 Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 01/12] iwlwifi: mvm: enable scheduled scan on newest firmware Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 02/12] iwlwifi: mvm: BT Coex - remove shadowing variable Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 03/12] iwlwifi: mvm: set MAC_FILTER_IN_BEACON correctly for STA/P2P client Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 04/12] iwlwifi: mvm: fix endianity issues with Smart Fifo commands Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 05/12] iwlwifi: increase DEFAULT_MAX_TX_POWER Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 06/12] iwlwifi: mvm: correctly handle PM/QoS changes from mac80211 Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 07/12] iwlwifi: mvm: treat EAPOLs like mgmt frames wrt rate Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 08/12] iwlwiwi: mvm: use bss_conf->dtim_period instead of conf.ps_dtim_period Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 09/12] iwlwifi: mvm: BT Coex - always initialize smps_mode Emmanuel Grumbach
2014-09-15  5:10 ` [PATCH 10/12] iwlwifi: dvm: disable power save by default Emmanuel Grumbach
2014-09-15  5:10 ` Emmanuel Grumbach [this message]
2014-09-15  5:10 ` [PATCH 12/12] iwlwifi: mvm: fix an overflow in iwl_mvm_get_signal_strength Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 01/28] iwlwifi: mvm: add LDPC support Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 02/28] iwlwifi: add and edit 8000 series PCI IDs Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 03/28] iwlwifi: mvm: allow preventing dummy notifications Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 04/28] iwlwifi: enable LDPC in 8000 chip family Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 05/28] iwlwifi: mvm: rs: remove max_rate_idx Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 06/28] iwlwifi: mvm: reset ucode_loaded flag when mac80211 stop is called Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 07/28] iwlwifi: mvm: fail temp test enabling if the ucode is not loaded Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 08/28] iwlwifi: mvm: add MVM_FW_MCAST_FILTER_PASS_ALL option Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 09/28] iwlwifi: mvm: rs: don't zero tx stats after idle Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 10/28] iwlwifi: mvm: disable aggregation queues in station DB in FW Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 11/28] iwlwifi: trans: don't configure the set_active in SCD for dvm Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 12/28] iwlwifi: make hw rev checking more readable Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 13/28] iwlwifi: pcie: clear command data on freeing Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 14/28] iwlwifi: define the non shared antenna per hardware Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 15/28] iwlwifi: mvm: don't update quota in firmware too often Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 16/28] iwlwifi/iwl-drv.c: fix typo defualt -> default Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 17/28] iwlwifi: mvm: remove unused static inline function Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 18/28] iwlwifi: mvm: update d0i3 debugfs Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 19/28] iwlwifi: mvm: use the firmware to get the temperature during CT kill Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 20/28] iwlwifi: mvm: allow to collect debug data when restart is disabled Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 21/28] iwlwifi: mvm: fix quota update avoidance Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 22/28] iwlwifi: mvm: reduce active dwell time Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 23/28] iwlwifi: mvm: update QoS parameters when they change Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 24/28] iwlwifi: mvm: move TDLS code to separate file Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 25/28] iwlwifi: mvm: Fix skip over dtim configuration in d0i3 Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 26/28] iwlwifi: mvm: fix PSM disable during TDLS Emmanuel Grumbach
2014-09-15  5:12 ` [PATCH 27/28] iwlwifi: mvm: move IWL_MVM_UAPSD_QUEUES to constants.h Emmanuel Grumbach
2014-09-15  5:13 ` [PATCH 28/28] iwlwifi: mvm: align CSA GO NOA time event naming with the firmware Emmanuel Grumbach
2014-09-15 18:41 ` pull request: iwlwifi-next 2014-09-15 John W. Linville
  -- strict thread matches above, loose matches on Subject: below --
2014-09-08 16:54 pull request: iwlwifi 2014-09-08 Emmanuel Grumbach
2014-09-08 16:56 ` [PATCH 11/12] iwlwifi: add PCI IDs and add then new 3165 series Emmanuel Grumbach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410757848-1827-11-git-send-email-egrumbach@gmail.com \
    --to=egrumbach@gmail.com \
    --cc=emmanuel.grumbach@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=oren.givon@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).