From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Subject: [PATCH v2 2/8] ath10k: add wmi support for addba_send
Date: Wed, 24 Dec 2014 13:29:03 +0530 [thread overview]
Message-ID: <1419407949-32367-3-git-send-email-rmanohar@qti.qualcomm.com> (raw)
In-Reply-To: <1419407949-32367-1-git-send-email-rmanohar@qti.qualcomm.com>
Add WMI support for sending addba request. This command is meant
for debugging purpose.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++
3 files changed, 50 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index b161043..badf422 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -121,6 +121,8 @@ struct wmi_ops {
struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
const u8 *mac);
+ struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
+ const u8 *mac, u32 tid, u32 buf_size);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -875,4 +877,21 @@ ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
ar->wmi.cmd->addba_clear_resp_cmdid);
}
+static inline int
+ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_addba_send)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_addba_send(ar, vdev_id, mac, tid, buf_size);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->addba_send_cmdid);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 499a779..74a0598 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2208,6 +2208,7 @@ static const struct wmi_ops wmi_tlv_ops = {
/* .gen_pdev_set_quiet_mode not implemented */
/* .gen_pdev_get_temperature not implemented */
/* .gen_addba_clear_resp not implemented */
+ /* .gen_addba_send not implemented */
};
/************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 4bd38a6..8103cbc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4901,6 +4901,32 @@ ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
return skb;
}
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+ u32 tid, u32 buf_size)
+{
+ struct wmi_addba_send_cmd *cmd;
+ struct sk_buff *skb;
+
+ if (!mac)
+ return ERR_PTR(-EINVAL);
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_addba_send_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, mac);
+ cmd->tid = __cpu_to_le32(tid);
+ cmd->buffersize = __cpu_to_le32(buf_size);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi addba send vdev_id 0x%X mac_addr %pM tid %u bufsize %u\n",
+ vdev_id, mac, tid, buf_size);
+ return skb;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -4953,6 +4979,7 @@ static const struct wmi_ops wmi_ops = {
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
/* .gen_pdev_get_temperature not implemented */
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_1_ops = {
@@ -5008,6 +5035,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_ops = {
@@ -5064,6 +5092,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5120,6 +5149,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+ .gen_addba_send = ath10k_wmi_op_gen_addba_send,
};
int ath10k_wmi_attach(struct ath10k *ar)
--
2.2.1
next prev parent reply other threads:[~2014-12-24 7:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-24 7:59 [PATCH v2 0/8] ath10k: add per station debugfs support Rajkumar Manoharan
2014-12-24 7:59 ` [PATCH v2 1/8] ath10k: add wmi support for addba_clear_resp Rajkumar Manoharan
2014-12-24 7:59 ` Rajkumar Manoharan [this message]
2014-12-24 7:59 ` [PATCH v2 3/8] ath10k: add wmi support for addba_set_resp Rajkumar Manoharan
2014-12-24 7:59 ` [PATCH v2 4/8] ath10k: add wmi support for delba_send Rajkumar Manoharan
2014-12-24 7:59 ` [PATCH v2 5/8] ath10k: Implement sta_add_debugfs Rajkumar Manoharan
2015-01-12 11:37 ` Kalle Valo
2014-12-24 7:59 ` [PATCH v2 6/8] ath10k: add support to send addba request Rajkumar Manoharan
2015-01-12 11:42 ` Kalle Valo
2014-12-24 7:59 ` [PATCH v2 7/8] ath10k: add support to send addba response Rajkumar Manoharan
2015-01-12 11:43 ` Kalle Valo
2014-12-24 7:59 ` [PATCH v2 8/8] ath10k: add support to send delba Rajkumar Manoharan
2015-01-12 11:45 ` Kalle Valo
2015-01-13 14:15 ` [PATCH v2 0/8] ath10k: add per station debugfs support Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419407949-32367-3-git-send-email-rmanohar@qti.qualcomm.com \
--to=rmanohar@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).