From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
To: linux-wireless@vger.kernel.org
Cc: Eyal Shapira <eyal@wizery.com>,
Eyal Shapira <eyalx.shapira@intel.com>,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 33/33] iwlwifi: mvm: rs: organize and cleanup consts
Date: Tue, 30 Dec 2014 16:19:08 +0200 [thread overview]
Message-ID: <1419949148-24046-33-git-send-email-emmanuel.grumbach@intel.com> (raw)
In-Reply-To: <1419948357.21410.4.camel@egrumbacBox>
From: Eyal Shapira <eyal@wizery.com>
Organize and cleanup the consts used by rs.
This is part of making some of these configurable.
Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
drivers/net/wireless/iwlwifi/mvm/constants.h | 28 +++++++
drivers/net/wireless/iwlwifi/mvm/rs.c | 109 +++++++++++++--------------
drivers/net/wireless/iwlwifi/mvm/rs.h | 39 ----------
3 files changed, 79 insertions(+), 97 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index 3bd9347..7cd1de8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -102,5 +102,33 @@
#define IWL_MVM_QUOTA_THRESHOLD 8
#define IWL_MVM_RS_RSSI_BASED_INIT_RATE 0
#define IWL_MVM_RS_DISABLE_MIMO 0
+#define IWL_MVM_RS_NUM_TRY_BEFORE_ANT_TOGGLE 1
+#define IWL_MVM_RS_LEGACY_RETRIES_PER_RATE 1
+#define IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE 2
+#define IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE_TW 1
+#define IWL_MVM_RS_INITIAL_MIMO_NUM_RATES 3
+#define IWL_MVM_RS_INITIAL_SISO_NUM_RATES 3
+#define IWL_MVM_RS_INITIAL_LEGACY_NUM_RATES 16
+#define IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES 16
+#define IWL_MVM_RS_SECONDARY_SISO_NUM_RATES 3
+#define IWL_MVM_RS_SECONDARY_SISO_RETRIES 1
+#define IWL_MVM_RS_RATE_MIN_FAILURE_TH 3
+#define IWL_MVM_RS_RATE_MIN_SUCCESS_TH 8
+#define IWL_MVM_RS_STAY_IN_COLUMN_TIMEOUT 5 /* Seconds */
+#define IWL_MVM_RS_IDLE_TIMEOUT 5 /* Seconds */
+#define IWL_MVM_RS_MISSED_RATE_MAX 15
+#define IWL_MVM_RS_LEGACY_FAILURE_LIMIT 160
+#define IWL_MVM_RS_LEGACY_SUCCESS_LIMIT 480
+#define IWL_MVM_RS_LEGACY_TABLE_COUNT 160
+#define IWL_MVM_RS_NON_LEGACY_FAILURE_LIMIT 400
+#define IWL_MVM_RS_NON_LEGACY_SUCCESS_LIMIT 4500
+#define IWL_MVM_RS_NON_LEGACY_TABLE_COUNT 1500
+#define IWL_MVM_RS_SR_FORCE_DECREASE 15 /* percent */
+#define IWL_MVM_RS_SR_NO_DECREASE 85 /* percent */
+#define IWL_MVM_RS_AGG_TIME_LIMIT 4000 /* 4 msecs. valid 100-8000 */
+#define IWL_MVM_RS_AGG_DISABLE_START 3
+#define IWL_MVM_RS_TPC_SR_FORCE_INCREASE 75 /* percent */
+#define IWL_MVM_RS_TPC_SR_NO_INCREASE 85 /* percent */
+#define IWL_MVM_RS_TPC_TX_POWER_STEP 3
#endif /* __MVM_CONSTANTS_H */
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 568829d..7ba6e5d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -42,25 +42,12 @@
#define RS_NAME "iwl-mvm-rs"
-#define NUM_TRY_BEFORE_ANT_TOGGLE 1
-#define RS_LEGACY_RETRIES_PER_RATE 1
-#define RS_HT_VHT_RETRIES_PER_RATE 2
-#define RS_HT_VHT_RETRIES_PER_RATE_TW 1
-#define RS_INITIAL_MIMO_NUM_RATES 3
-#define RS_INITIAL_SISO_NUM_RATES 3
-#define RS_INITIAL_LEGACY_NUM_RATES LINK_QUAL_MAX_RETRY_NUM
-#define RS_SECONDARY_LEGACY_NUM_RATES LINK_QUAL_MAX_RETRY_NUM
-#define RS_SECONDARY_SISO_NUM_RATES 3
-#define RS_SECONDARY_SISO_RETRIES 1
-
#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
-#define IWL_RATE_MIN_FAILURE_TH 3 /* min failures to calc tpt */
-#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
-/* max allowed rate miss before sync LQ cmd */
-#define IWL_MISSED_RATE_MAX 15
-#define RS_STAY_IN_COLUMN_TIMEOUT (5*HZ)
-#define RS_IDLE_TIMEOUT (5*HZ)
+/* Calculations of success ratio are done in fixed point where 12800 is 100%.
+ * Use this macro when dealing with thresholds consts set as a percentage
+ */
+#define RS_PERCENT(x) (128 * x)
static u8 rs_ht_to_legacy[] = {
[IWL_RATE_MCS_0_INDEX] = IWL_RATE_6M_INDEX,
@@ -613,7 +600,8 @@ static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
* at this rate. window->data contains the bitmask of successful
* packets.
*/
-static int _rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
+static int _rs_collect_tx_data(struct iwl_mvm *mvm,
+ struct iwl_scale_tbl_info *tbl,
int scale_index, int attempts, int successes,
struct iwl_rate_scale_data *window)
{
@@ -668,8 +656,8 @@ static int _rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
fail_count = window->counter - window->success_counter;
/* Calculate average throughput, if we have enough history. */
- if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
- (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
+ if ((fail_count >= IWL_MVM_RS_RATE_MIN_FAILURE_TH) ||
+ (window->success_counter >= IWL_MVM_RS_RATE_MIN_SUCCESS_TH))
window->average_tpt = (window->success_ratio * tpt + 64) / 128;
else
window->average_tpt = IWL_INVALID_VALUE;
@@ -677,7 +665,8 @@ static int _rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
return 0;
}
-static int rs_collect_tx_data(struct iwl_lq_sta *lq_sta,
+static int rs_collect_tx_data(struct iwl_mvm *mvm,
+ struct iwl_lq_sta *lq_sta,
struct iwl_scale_tbl_info *tbl,
int scale_index, int attempts, int successes,
u8 reduced_txp)
@@ -698,7 +687,7 @@ static int rs_collect_tx_data(struct iwl_lq_sta *lq_sta,
/* Select window for current tx bit rate */
window = &(tbl->win[scale_index]);
- ret = _rs_collect_tx_data(tbl, scale_index, attempts, successes,
+ ret = _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes,
window);
if (ret)
return ret;
@@ -707,7 +696,7 @@ static int rs_collect_tx_data(struct iwl_lq_sta *lq_sta,
return -EINVAL;
window = &tbl->tpc_win[reduced_txp];
- return _rs_collect_tx_data(tbl, scale_index, attempts, successes,
+ return _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes,
window);
}
@@ -1125,7 +1114,8 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
}
if (time_after(jiffies,
- (unsigned long)(lq_sta->last_tx + RS_IDLE_TIMEOUT))) {
+ (unsigned long)(lq_sta->last_tx +
+ (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) {
int t;
IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n");
@@ -1158,7 +1148,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
* ... driver.
*/
lq_sta->missed_rate_counter++;
- if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
+ if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) {
lq_sta->missed_rate_counter = 0;
IWL_DEBUG_RATE(mvm,
"Too many rates mismatch. Send sync LQ. rs_state %d\n",
@@ -1213,7 +1203,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
ucode_rate = le32_to_cpu(table->rs_table[0]);
rs_rate_from_ucode_rate(ucode_rate, info->band, &rate);
- rs_collect_tx_data(lq_sta, curr_tbl, rate.index,
+ rs_collect_tx_data(mvm, lq_sta, curr_tbl, rate.index,
info->status.ampdu_len,
info->status.ampdu_ack_len,
reduced_txp);
@@ -1249,7 +1239,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
else
continue;
- rs_collect_tx_data(lq_sta, tmp_tbl, rate.index, 1,
+ rs_collect_tx_data(mvm, lq_sta, tmp_tbl, rate.index, 1,
i < retries ? 0 : legacy_success,
reduced_txp);
}
@@ -1303,13 +1293,13 @@ static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy,
IWL_DEBUG_RATE(mvm, "Moving to RS_STATE_STAY_IN_COLUMN\n");
lq_sta->rs_state = RS_STATE_STAY_IN_COLUMN;
if (is_legacy) {
- lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
- lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
- lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
+ lq_sta->table_count_limit = IWL_MVM_RS_LEGACY_TABLE_COUNT;
+ lq_sta->max_failure_limit = IWL_MVM_RS_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IWL_MVM_RS_LEGACY_SUCCESS_LIMIT;
} else {
- lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
- lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
- lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
+ lq_sta->table_count_limit = IWL_MVM_RS_NON_LEGACY_TABLE_COUNT;
+ lq_sta->max_failure_limit = IWL_MVM_RS_NON_LEGACY_FAILURE_LIMIT;
+ lq_sta->max_success_limit = IWL_MVM_RS_NON_LEGACY_SUCCESS_LIMIT;
}
lq_sta->table_count = 0;
lq_sta->total_failed = 0;
@@ -1427,7 +1417,7 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm,
u32 target_tpt;
int rate_idx;
- if (success_ratio > RS_SR_NO_DECREASE) {
+ if (success_ratio > IWL_MVM_RS_SR_NO_DECREASE) {
target_tpt = 100 * expected_current_tpt;
IWL_DEBUG_RATE(mvm,
"SR %d high. Find rate exceeding EXPECTED_CURRENT %d\n",
@@ -1495,7 +1485,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
flush_interval_passed =
time_after(jiffies,
(unsigned long)(lq_sta->flush_timer +
- RS_STAY_IN_COLUMN_TIMEOUT));
+ (IWL_MVM_RS_STAY_IN_COLUMN_TIMEOUT * HZ)));
/*
* Check if we should allow search for new modulation mode.
@@ -1735,7 +1725,8 @@ static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm,
{
enum rs_action action = RS_ACTION_STAY;
- if ((sr <= RS_SR_FORCE_DECREASE) || (current_tpt == 0)) {
+ if ((sr <= RS_PERCENT(IWL_MVM_RS_SR_FORCE_DECREASE)) ||
+ (current_tpt == 0)) {
IWL_DEBUG_RATE(mvm,
"Decrease rate because of low SR\n");
return RS_ACTION_DOWNSCALE;
@@ -1794,7 +1785,7 @@ static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm,
out:
if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID)) {
- if (sr >= RS_SR_NO_DECREASE) {
+ if (sr >= RS_PERCENT(IWL_MVM_RS_SR_NO_DECREASE)) {
IWL_DEBUG_RATE(mvm,
"SR is above NO DECREASE. Avoid downscale\n");
action = RS_ACTION_STAY;
@@ -1836,11 +1827,11 @@ static bool rs_stbc_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
static void rs_get_adjacent_txp(struct iwl_mvm *mvm, int index,
int *weaker, int *stronger)
{
- *weaker = index + TPC_TX_POWER_STEP;
+ *weaker = index + IWL_MVM_RS_TPC_TX_POWER_STEP;
if (*weaker > TPC_MAX_REDUCTION)
*weaker = TPC_INVALID;
- *stronger = index - TPC_TX_POWER_STEP;
+ *stronger = index - IWL_MVM_RS_TPC_TX_POWER_STEP;
if (*stronger < 0)
*stronger = TPC_INVALID;
}
@@ -1896,7 +1887,8 @@ static enum tpc_action rs_get_tpc_action(struct iwl_mvm *mvm,
}
/* Too many failures, increase txp */
- if (sr <= TPC_SR_FORCE_INCREASE || current_tpt == 0) {
+ if (sr <= RS_PERCENT(IWL_MVM_RS_TPC_SR_FORCE_INCREASE) ||
+ current_tpt == 0) {
IWL_DEBUG_RATE(mvm, "increase txp because of weak SR\n");
return TPC_ACTION_NO_RESTIRCTION;
}
@@ -1919,7 +1911,8 @@ static enum tpc_action rs_get_tpc_action(struct iwl_mvm *mvm,
}
/* next, increase if needed */
- if (sr < TPC_SR_NO_INCREASE && strong != TPC_INVALID) {
+ if (sr < RS_PERCENT(IWL_MVM_RS_TPC_SR_NO_INCREASE) &&
+ strong != TPC_INVALID) {
if (weak_tpt == IWL_INVALID_VALUE &&
strong_tpt != IWL_INVALID_VALUE &&
current_tpt < strong_tpt) {
@@ -2117,8 +2110,8 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
* in current association (use new rate found above).
*/
fail_count = window->counter - window->success_counter;
- if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
+ if ((fail_count < IWL_MVM_RS_RATE_MIN_FAILURE_TH) &&
+ (window->success_counter < IWL_MVM_RS_RATE_MIN_SUCCESS_TH)) {
IWL_DEBUG_RATE(mvm,
"(%s: %d): Test Window: succ %d total %d\n",
rs_pretty_lq_type(rate->type),
@@ -2720,7 +2713,7 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
* previous packets? Need to have IEEE 802.1X auth succeed immediately
* after assoc.. */
- lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
+ lq_sta->missed_rate_counter = IWL_MVM_RS_MISSED_RATE_MAX;
lq_sta->band = sband->band;
/*
* active legacy rates as per supported rates bitmap
@@ -2925,14 +2918,14 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
rate.stbc = rs_stbc_allow(mvm, sta, lq_sta);
if (is_siso(&rate)) {
- num_rates = RS_INITIAL_SISO_NUM_RATES;
- num_retries = RS_HT_VHT_RETRIES_PER_RATE;
+ num_rates = IWL_MVM_RS_INITIAL_SISO_NUM_RATES;
+ num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE;
} else if (is_mimo(&rate)) {
- num_rates = RS_INITIAL_MIMO_NUM_RATES;
- num_retries = RS_HT_VHT_RETRIES_PER_RATE;
+ num_rates = IWL_MVM_RS_INITIAL_MIMO_NUM_RATES;
+ num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE;
} else {
- num_rates = RS_INITIAL_LEGACY_NUM_RATES;
- num_retries = RS_LEGACY_RETRIES_PER_RATE;
+ num_rates = IWL_MVM_RS_INITIAL_LEGACY_NUM_RATES;
+ num_retries = IWL_MVM_RS_LEGACY_RETRIES_PER_RATE;
toggle_ant = true;
}
@@ -2943,12 +2936,12 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
rs_get_lower_rate_down_column(lq_sta, &rate);
if (is_siso(&rate)) {
- num_rates = RS_SECONDARY_SISO_NUM_RATES;
- num_retries = RS_SECONDARY_SISO_RETRIES;
+ num_rates = IWL_MVM_RS_SECONDARY_SISO_NUM_RATES;
+ num_retries = IWL_MVM_RS_SECONDARY_SISO_RETRIES;
lq_cmd->mimo_delim = index;
} else if (is_legacy(&rate)) {
- num_rates = RS_SECONDARY_LEGACY_NUM_RATES;
- num_retries = RS_LEGACY_RETRIES_PER_RATE;
+ num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES;
+ num_retries = IWL_MVM_RS_LEGACY_RETRIES_PER_RATE;
} else {
WARN_ON_ONCE(1);
}
@@ -2961,8 +2954,8 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
rs_get_lower_rate_down_column(lq_sta, &rate);
- num_rates = RS_SECONDARY_LEGACY_NUM_RATES;
- num_retries = RS_LEGACY_RETRIES_PER_RATE;
+ num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES;
+ num_retries = IWL_MVM_RS_LEGACY_RETRIES_PER_RATE;
rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index,
num_rates, num_retries, valid_tx_ant,
@@ -2979,9 +2972,9 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
struct iwl_mvm_sta *mvmsta;
struct iwl_mvm_vif *mvmvif;
- lq_cmd->agg_disable_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+ lq_cmd->agg_disable_start_th = IWL_MVM_RS_AGG_DISABLE_START;
lq_cmd->agg_time_limit =
- cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+ cpu_to_le16(IWL_MVM_RS_AGG_TIME_LIMIT);
#ifdef CONFIG_MAC80211_DEBUGFS
if (lq_sta->pers.dbg_fixed_rate) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index defd70a..f8f5bf2 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -137,42 +137,10 @@ enum {
#define IWL_INVALID_VALUE -1
-#define IWL_MIN_RSSI_VAL -100
-#define IWL_MAX_RSSI_VAL 0
-
-/* These values specify how many Tx frame attempts before
- * searching for a new modulation mode */
-#define IWL_LEGACY_FAILURE_LIMIT 160
-#define IWL_LEGACY_SUCCESS_LIMIT 480
-#define IWL_LEGACY_TABLE_COUNT 160
-
-#define IWL_NONE_LEGACY_FAILURE_LIMIT 400
-#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500
-#define IWL_NONE_LEGACY_TABLE_COUNT 1500
-
-/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
-#define IWL_RS_GOOD_RATIO 12800 /* 100% */
-#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */
-#define IWL_RATE_HIGH_TH 10880 /* 85% */
-#define IWL_RATE_INCREASE_TH 6400 /* 50% */
-#define RS_SR_FORCE_DECREASE 1920 /* 15% */
-#define RS_SR_NO_DECREASE 10880 /* 85% */
-
-#define TPC_SR_FORCE_INCREASE 9600 /* 75% */
-#define TPC_SR_NO_INCREASE 10880 /* 85% */
-#define TPC_TX_POWER_STEP 3
#define TPC_MAX_REDUCTION 15
#define TPC_NO_REDUCTION 0
#define TPC_INVALID 0xff
-#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
-#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000)
-#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100)
-
-#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
-#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
-#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
-
#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
@@ -181,14 +149,7 @@ enum {
/* load per tid defines for A-MPDU activation */
#define IWL_AGG_TPT_THREHOLD 0
-#define IWL_AGG_LOAD_THRESHOLD 10
#define IWL_AGG_ALL_TID 0xff
-#define TID_QUEUE_CELL_SPACING 50 /*mS */
-#define TID_QUEUE_MAX_SIZE 20
-#define TID_ROUND_VALUE 5 /* mS */
-
-#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
-#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
enum iwl_table_type {
LQ_NONE,
--
1.9.1
next prev parent reply other threads:[~2014-12-30 14:20 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-30 14:05 pull request: iwlwifi-next 2012-12-30 Grumbach, Emmanuel
2014-12-30 14:18 ` [PATCH 01/33] iwlwifi: remove MODULE_VERSION Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 02/33] iwlwifi: mvm: add fw runtime stack to dump data Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 03/33] Revert "iwlwifi: use correct fw file in 8000 b-step" Emmanuel Grumbach
2015-01-06 17:30 ` Kalle Valo
2014-12-30 14:18 ` [PATCH 04/33] iwlwifi: mvm: support LnP 1x1 antenna configuration Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 05/33] iwlwifi: pcie: let the Manageability Engine know when we leave Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 06/33] iwlwifi: mvm: add debugfs to trigger fw debug logs collection Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 07/33] iwlwifi: mvm: allow RSSI compensation Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 08/33] iwlwifi: mvm: Set the HW step in the core dump Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 09/33] iwlwifi: mvm: clear tt values when entering CT-kill Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 10/33] iwlwifi: mvm: rs: fix max rate allowed if no rate is allowed Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 11/33] iwlwifi: mvm: support additional nvm_file in family 8000 B step Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 12/33] iwlwifi: mvm: add smem content to dump data Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 13/33] iwlwifi: mvm: change SMEM dump to general purpose memory dump Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 14/33] iwlwifi: mvm: convert the SRAM dump to the generic " Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 15/33] iwlwifi: pcie: add basic reference accounting Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 16/33] iwlwifi: mvm: allow both d0i3 and d3 wowlan configuration modes Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 17/33] iwlwifi: support multiple d0i3 modes Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 18/33] iwlwifi: mvm: support IWL_D0I3_MODE_ON_SUSPEND d0i3 mode Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 19/33] iwlwifi: mvm: consider d0i3_disable in iwl_mvm_is_d0i3_supported() Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 20/33] iwlwifi: mvm: wait for d0i3 exit on hw restart Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 21/33] iwlwifi: mvm: support 2 different channels Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 22/33] iwlwifi: dvm: tt: Use setup_timer Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 23/33] iwlwifi: dvm: main: " Emmanuel Grumbach
2014-12-30 14:18 ` [PATCH 24/33] iwlwifi: mvm: clean refs before stop_device() Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 25/33] iwlwifi: remove useless extern definition of iwl4265_2ac_sdio_cfg Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 26/33] iwlwifi: mvm: use iwl_mvm_vif_from_mac80211() consistently Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 27/33] iwlwifi: mvm: use iwl_mvm_sta_from_mac80211() consistently Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 28/33] iwlwifi: tlv: add support for IWL_UCODE_TLV_SDIO_ADMA_ADDR TLV Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 29/33] iwlwifi: mvm: ask the fw to wakeup (from d0i3) on sysassert Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 30/33] iwlwifi: mvm: Configure EBS scan ratio Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 31/33] iwlwifi: mvm: call to pcie_apply_destination also on family 8000 B step Emmanuel Grumbach
2014-12-30 14:19 ` [PATCH 32/33] iwlwifi: mvm: Alter passive scan fragmentation parameters in case of multi-MAC Emmanuel Grumbach
2014-12-30 14:19 ` Emmanuel Grumbach [this message]
2015-01-06 17:37 ` pull request: iwlwifi-next 2012-12-30 Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419949148-24046-33-git-send-email-emmanuel.grumbach@intel.com \
--to=emmanuel.grumbach@intel.com \
--cc=eyal@wizery.com \
--cc=eyalx.shapira@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).