From: Larry Finger <Larry.Finger@lwfinger.net>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org,
Larry Finger <Larry.Finger@lwfinger.net>,
netdev@vger.kernel.org
Subject: [PATCH 06/11] rtlwifi: rtl8192de: Convert driver to use common DM table initialization
Date: Fri, 2 Jan 2015 10:58:23 -0600 [thread overview]
Message-ID: <1420217908-1382-7-git-send-email-Larry.Finger@lwfinger.net> (raw)
In-Reply-To: <1420217908-1382-1-git-send-email-Larry.Finger@lwfinger.net>
This patch converts driver rtl8192de to use the common routine to
initialize dm_digtable.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 32 +++--------------------------
1 file changed, 3 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
index 75643ab..a1be5a6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
@@ -156,34 +156,6 @@ static const u8 cckswing_table_ch14[CCK_TABLE_SIZE][8] = {
{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00} /* 32, -16.0dB */
};
-static void rtl92d_dm_diginit(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct dig_t *de_digtable = &rtlpriv->dm_digtable;
-
- de_digtable->dig_enable_flag = true;
- de_digtable->dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
- de_digtable->cur_igvalue = 0x20;
- de_digtable->pre_igvalue = 0x0;
- de_digtable->cursta_cstate = DIG_STA_DISCONNECT;
- de_digtable->presta_cstate = DIG_STA_DISCONNECT;
- de_digtable->curmultista_cstate = DIG_MULTISTA_DISCONNECT;
- de_digtable->rssi_lowthresh = DM_DIG_THRESH_LOW;
- de_digtable->rssi_highthresh = DM_DIG_THRESH_HIGH;
- de_digtable->fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
- de_digtable->fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
- de_digtable->rx_gain_max = DM_DIG_FA_UPPER;
- de_digtable->rx_gain_min = DM_DIG_FA_LOWER;
- de_digtable->back_val = DM_DIG_BACKOFF_DEFAULT;
- de_digtable->back_range_max = DM_DIG_BACKOFF_MAX;
- de_digtable->back_range_min = DM_DIG_BACKOFF_MIN;
- de_digtable->pre_cck_pd_state = CCK_PD_STAGE_LOWRSSI;
- de_digtable->cur_cck_pd_state = CCK_PD_STAGE_MAX;
- de_digtable->large_fa_hit = 0;
- de_digtable->recover_cnt = 0;
- de_digtable->forbidden_igi = DM_DIG_FA_LOWER;
-}
-
static void rtl92d_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
{
u32 ret_value;
@@ -1306,7 +1278,9 @@ void rtl92d_dm_init(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
- rtl92d_dm_diginit(hw);
+ rtl_dm_diginit(hw, 0x20);
+ rtlpriv->dm_digtable.rx_gain_max = DM_DIG_FA_UPPER;
+ rtlpriv->dm_digtable.rx_gain_min = DM_DIG_FA_LOWER;
rtl92d_dm_init_dynamic_txpower(hw);
rtl92d_dm_init_edca_turbo(hw);
rtl92d_dm_init_rate_adaptive_mask(hw);
--
2.1.2
next prev parent reply other threads:[~2015-01-02 16:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-02 16:58 [PATCH 00/11] rtlwifi: A set of patches that simplify the drivers Larry Finger
2015-01-02 16:58 ` [PATCH 01/11] rtlwifi: Unify variable naming for all drivers Larry Finger
2015-01-02 16:58 ` [PATCH 02/11] rtlwifi: rtl8723be: Improve modinfo output Larry Finger
2015-01-02 18:35 ` Sergei Shtylyov
2015-01-06 15:59 ` Larry Finger
2015-01-02 16:58 ` [PATCH 03/11] rtlwifi: Create new routine to initialize the DM tables Larry Finger
2015-01-02 16:58 ` [PATCH 04/11] rtlwifi: rtl8188ee: Convert driver to use the common DM table init routine Larry Finger
2015-01-02 16:58 ` [PATCH 05/11] rtlwifi: rtl8192c-common: Convert driver to use common DM table initialization Larry Finger
2015-01-02 16:58 ` Larry Finger [this message]
2015-01-02 16:58 ` [PATCH 07/11] rtlwifi: rtl8192ee: " Larry Finger
2015-01-02 16:58 ` [PATCH 08/11] rtlwifi: rtl8723ae: " Larry Finger
2015-01-02 16:58 ` [PATCH 09/11] rtlwifi: rtl8723be: " Larry Finger
2015-01-02 16:58 ` [PATCH 10/11] rtlwifi: rtl8821ae: " Larry Finger
2015-01-02 16:58 ` [PATCH 11/11] rtlwifi: Move macro definitions to core Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420217908-1382-7-git-send-email-Larry.Finger@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).