From: Michal Kazior <michal.kazior@tieto.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com>
Subject: [PATCH 2/2] ath10k: use scan burst for hw roc
Date: Tue, 31 Mar 2015 11:03:48 +0000 [thread overview]
Message-ID: <1427799828-9539-2-git-send-email-michal.kazior@tieto.com> (raw)
In-Reply-To: <1427799828-9539-1-git-send-email-michal.kazior@tieto.com>
This improves chances of getting onto a foreign
channel and thus makes P2P a bit more reliable.
Without scan burst it was possible for firmware to
not switch to foreign channel resulting in "failed
to switch to channel for roc scan" warning. This
would also effectively fail some offchan tx
requests and lead to P2P find/connect taking
longer. This could be observed when other vifs
were running/busy, e.g. with P2P GO.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 +
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index cb5d253e87d9..1d48eaafe42b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5069,6 +5069,7 @@ static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
arg.max_scan_time = scan_time_msec;
arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+ arg.burst_duration_ms = duration;
ret = ath10k_start_scan(ar, &arg);
if (ret) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 7bfb45492027..8a6f6fdf4bdc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1358,7 +1358,7 @@ ath10k_wmi_tlv_op_gen_start_scan(struct ath10k *ar,
cmd = (void *)tlv->value;
ath10k_wmi_put_start_scan_common(&cmd->common, arg);
- cmd->burst_duration_ms = __cpu_to_le32(0);
+ cmd->burst_duration_ms = __cpu_to_le32(arg->burst_duration_ms);
cmd->num_channels = __cpu_to_le32(arg->n_channels);
cmd->num_ssids = __cpu_to_le32(arg->n_ssids);
cmd->num_bssids = __cpu_to_le32(arg->n_bssids);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 00b5799c5cdb..ef47ab5c4c9f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2168,6 +2168,7 @@ struct wmi_start_scan_arg {
u32 max_scan_time;
u32 probe_delay;
u32 scan_ctrl_flags;
+ u32 burst_duration_ms;
u32 ie_len;
u32 n_channels;
--
2.1.4
next prev parent reply other threads:[~2015-03-31 11:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 11:03 [PATCH 1/2] ath10k: fix hw roc expiration Michal Kazior
2015-03-31 11:03 ` Michal Kazior [this message]
2015-04-15 12:08 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427799828-9539-2-git-send-email-michal.kazior@tieto.com \
--to=michal.kazior@tieto.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).