From: Raja Mani <rmani@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 05/10] ath10k: add 10.4 fw wmi vdev cmd ids
Date: Tue, 16 Jun 2015 11:15:18 +0530 [thread overview]
Message-ID: <1434433523-8357-6-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1434433523-8357-1-git-send-email-rmani@qti.qualcomm.com>
Include 10.4 firmware wmi vdev cmd id and make up wmi vdev map
table wmi_10_4_vdev_param_map and also update non 10.4 firmware
vdev cmd map table with newly added vdev cmd id specifically for
10.4 firmware as unsupported.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 ++++
drivers/net/wireless/ath/ath10k/wmi.c | 120 ++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 83 +++++++++++++++++++++
3 files changed, 218 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 8fdba38..df8ac2e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3262,6 +3262,21 @@ static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = {
.tx_encap_type = WMI_TLV_VDEV_PARAM_TX_ENCAP_TYPE,
.ap_detect_out_of_sync_sleeping_sta_time_secs =
WMI_TLV_VDEV_PARAM_UNSUPPORTED,
+ .rc_num_retries = WMI_VDEV_PARAM_UNSUPPORTED,
+ .cabq_maxdur = WMI_VDEV_PARAM_UNSUPPORTED,
+ .mfptest_set = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht_sgimask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht80_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_enable = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_tgt_bmiss_num = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_bmiss_sample_cycle = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_slop_step = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_init_slop = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_pause = WMI_VDEV_PARAM_UNSUPPORTED,
+ .proxy_sta = WMI_VDEV_PARAM_UNSUPPORTED,
+ .meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
+ .rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
+ .bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
};
static const struct wmi_ops wmi_tlv_ops = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 51b5d3c..9aa6989 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -719,6 +719,21 @@ static struct wmi_vdev_param_map wmi_vdev_param_map = {
.tx_encap_type = WMI_VDEV_PARAM_TX_ENCAP_TYPE,
.ap_detect_out_of_sync_sleeping_sta_time_secs =
WMI_VDEV_PARAM_UNSUPPORTED,
+ .rc_num_retries = WMI_VDEV_PARAM_UNSUPPORTED,
+ .cabq_maxdur = WMI_VDEV_PARAM_UNSUPPORTED,
+ .mfptest_set = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht_sgimask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht80_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_enable = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_tgt_bmiss_num = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_bmiss_sample_cycle = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_slop_step = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_init_slop = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_pause = WMI_VDEV_PARAM_UNSUPPORTED,
+ .proxy_sta = WMI_VDEV_PARAM_UNSUPPORTED,
+ .meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
+ .rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
+ .bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
};
/* 10.X WMI VDEV param map */
@@ -778,6 +793,21 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
.tx_encap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.ap_detect_out_of_sync_sleeping_sta_time_secs =
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+ .rc_num_retries = WMI_VDEV_PARAM_UNSUPPORTED,
+ .cabq_maxdur = WMI_VDEV_PARAM_UNSUPPORTED,
+ .mfptest_set = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht_sgimask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht80_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_enable = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_tgt_bmiss_num = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_bmiss_sample_cycle = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_slop_step = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_init_slop = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_pause = WMI_VDEV_PARAM_UNSUPPORTED,
+ .proxy_sta = WMI_VDEV_PARAM_UNSUPPORTED,
+ .meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
+ .rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
+ .bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
};
static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
@@ -836,6 +866,95 @@ static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
.tx_encap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.ap_detect_out_of_sync_sleeping_sta_time_secs =
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+ .rc_num_retries = WMI_VDEV_PARAM_UNSUPPORTED,
+ .cabq_maxdur = WMI_VDEV_PARAM_UNSUPPORTED,
+ .mfptest_set = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht_sgimask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .vht80_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_enable = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_tgt_bmiss_num = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_bmiss_sample_cycle = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_slop_step = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_init_slop = WMI_VDEV_PARAM_UNSUPPORTED,
+ .early_rx_adjust_pause = WMI_VDEV_PARAM_UNSUPPORTED,
+ .proxy_sta = WMI_VDEV_PARAM_UNSUPPORTED,
+ .meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
+ .rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
+ .bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+};
+
+static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
+ .rts_threshold = WMI_10_4_VDEV_PARAM_RTS_THRESHOLD,
+ .fragmentation_threshold = WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ .beacon_interval = WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
+ .listen_interval = WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
+ .multicast_rate = WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
+ .mgmt_tx_rate = WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
+ .slot_time = WMI_10_4_VDEV_PARAM_SLOT_TIME,
+ .preamble = WMI_10_4_VDEV_PARAM_PREAMBLE,
+ .swba_time = WMI_10_4_VDEV_PARAM_SWBA_TIME,
+ .wmi_vdev_stats_update_period = WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
+ .wmi_vdev_pwrsave_ageout_time = WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
+ .wmi_vdev_host_swba_interval = WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
+ .dtim_period = WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
+ .wmi_vdev_oc_scheduler_air_time_limit =
+ WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ .wds = WMI_10_4_VDEV_PARAM_WDS,
+ .atim_window = WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
+ .bmiss_count_max = WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
+ .bmiss_first_bcnt = WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
+ .bmiss_final_bcnt = WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
+ .feature_wmm = WMI_10_4_VDEV_PARAM_FEATURE_WMM,
+ .chwidth = WMI_10_4_VDEV_PARAM_CHWIDTH,
+ .chextoffset = WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
+ .disable_htprotection = WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
+ .sta_quickkickout = WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
+ .mgmt_rate = WMI_10_4_VDEV_PARAM_MGMT_RATE,
+ .protection_mode = WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
+ .fixed_rate = WMI_10_4_VDEV_PARAM_FIXED_RATE,
+ .sgi = WMI_10_4_VDEV_PARAM_SGI,
+ .ldpc = WMI_10_4_VDEV_PARAM_LDPC,
+ .tx_stbc = WMI_10_4_VDEV_PARAM_TX_STBC,
+ .rx_stbc = WMI_10_4_VDEV_PARAM_RX_STBC,
+ .intra_bss_fwd = WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
+ .def_keyid = WMI_10_4_VDEV_PARAM_DEF_KEYID,
+ .nss = WMI_10_4_VDEV_PARAM_NSS,
+ .bcast_data_rate = WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
+ .mcast_data_rate = WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
+ .mcast_indicate = WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
+ .dhcp_indicate = WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
+ .unknown_dest_indicate = WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+ .ap_keepalive_min_idle_inactive_time_secs =
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_idle_inactive_time_secs =
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+ .ap_keepalive_max_unresponsive_time_secs =
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+ .ap_enable_nawds = WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
+ .mcast2ucast_set = WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
+ .enable_rtscts = WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
+ .txbf = WMI_10_4_VDEV_PARAM_TXBF,
+ .packet_powersave = WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
+ .drop_unencry = WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
+ .tx_encap_type = WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
+ .ap_detect_out_of_sync_sleeping_sta_time_secs =
+ WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+ .rc_num_retries = WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
+ .cabq_maxdur = WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
+ .mfptest_set = WMI_10_4_VDEV_PARAM_MFPTEST_SET,
+ .vht_sgimask = WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
+ .vht80_ratemask = WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
+ .early_rx_adjust_enable = WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
+ .early_rx_tgt_bmiss_num = WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
+ .early_rx_bmiss_sample_cycle =
+ WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
+ .early_rx_slop_step = WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
+ .early_rx_init_slop = WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
+ .early_rx_adjust_pause = WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
+ .proxy_sta = WMI_10_4_VDEV_PARAM_PROXY_STA,
+ .meru_vc = WMI_10_4_VDEV_PARAM_MERU_VC,
+ .rx_decap_type = WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
+ .bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
};
static struct wmi_pdev_param_map wmi_pdev_param_map = {
@@ -5721,6 +5840,7 @@ int ath10k_wmi_attach(struct ath10k *ar)
case ATH10K_FW_WMI_OP_VERSION_10_4:
ar->wmi.ops = &wmi_10_4_ops;
ar->wmi.cmd = &wmi_10_4_cmd_map;
+ ar->wmi.vdev_param = &wmi_10_4_vdev_param_map;
break;
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
ar->wmi.cmd = &wmi_10_2_4_cmd_map;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 8919684..ea74cd0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3859,6 +3859,21 @@ struct wmi_vdev_param_map {
u32 drop_unencry;
u32 tx_encap_type;
u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
+ u32 rc_num_retries;
+ u32 cabq_maxdur;
+ u32 mfptest_set;
+ u32 vht_sgimask;
+ u32 vht80_ratemask;
+ u32 early_rx_adjust_enable;
+ u32 early_rx_tgt_bmiss_num;
+ u32 early_rx_bmiss_sample_cycle;
+ u32 early_rx_slop_step;
+ u32 early_rx_init_slop;
+ u32 early_rx_adjust_pause;
+ u32 proxy_sta;
+ u32 meru_vc;
+ u32 rx_decap_type;
+ u32 bw_nss_ratemask;
};
#define WMI_VDEV_PARAM_UNSUPPORTED 0
@@ -4117,6 +4132,74 @@ enum wmi_10x_vdev_param {
WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
};
+enum wmi_10_4_vdev_param {
+ WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
+ WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
+ WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
+ WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
+ WMI_10_4_VDEV_PARAM_SLOT_TIME,
+ WMI_10_4_VDEV_PARAM_PREAMBLE,
+ WMI_10_4_VDEV_PARAM_SWBA_TIME,
+ WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
+ WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
+ WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
+ WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
+ WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ WMI_10_4_VDEV_PARAM_WDS,
+ WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
+ WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
+ WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
+ WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
+ WMI_10_4_VDEV_PARAM_FEATURE_WMM,
+ WMI_10_4_VDEV_PARAM_CHWIDTH,
+ WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
+ WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
+ WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
+ WMI_10_4_VDEV_PARAM_MGMT_RATE,
+ WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
+ WMI_10_4_VDEV_PARAM_FIXED_RATE,
+ WMI_10_4_VDEV_PARAM_SGI,
+ WMI_10_4_VDEV_PARAM_LDPC,
+ WMI_10_4_VDEV_PARAM_TX_STBC,
+ WMI_10_4_VDEV_PARAM_RX_STBC,
+ WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
+ WMI_10_4_VDEV_PARAM_DEF_KEYID,
+ WMI_10_4_VDEV_PARAM_NSS,
+ WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
+ WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
+ WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
+ WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
+ WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
+ WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
+ WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
+ WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
+ WMI_10_4_VDEV_PARAM_TXBF,
+ WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
+ WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
+ WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
+ WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+ WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
+ WMI_10_4_VDEV_PARAM_MFPTEST_SET,
+ WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
+ WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
+ WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
+ WMI_10_4_VDEV_PARAM_PROXY_STA,
+ WMI_10_4_VDEV_PARAM_MERU_VC,
+ WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
+ WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
+};
+
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
--
1.8.1.2
next prev parent reply other threads:[~2015-06-16 5:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 5:45 [PATCH 00/10] introduce wmi support for qca99X0 Raja Mani
2015-06-16 5:45 ` [PATCH 01/10] ath10k: include new wmi op version for 10.4 fw Raja Mani
2015-06-16 5:45 ` [PATCH 02/10] ath10k: add 10.4 fw wmi service bitmap definition Raja Mani
2015-06-16 5:45 ` [PATCH 03/10] ath10k: include 10.4 fw specific wmi cmd and event ids Raja Mani
2015-06-16 5:45 ` [PATCH 04/10] ath10k: set 10.4 fw exclusive wmi cmd as unsupported for other fw versions Raja Mani
2015-06-16 5:45 ` Raja Mani [this message]
2015-06-16 5:45 ` [PATCH 06/10] ath10k: add 10.4 fw wmi pdev cmd ids Raja Mani
2015-06-16 5:45 ` [PATCH 07/10] ath10k: fill 10.4 fw wmi init cmd default values Raja Mani
2015-06-16 5:45 ` [PATCH 08/10] ath10k: handle 10.4 fw wmi mgmt rx event Raja Mani
2015-06-16 5:45 ` [PATCH 09/10] ath10k: adjust default peer limits if qcache enabled in 10.4 fw Raja Mani
2015-06-16 5:45 ` [PATCH 10/10] ath10k: handle 10.4 fw wmi ready event Raja Mani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434433523-8357-6-git-send-email-rmani@qti.qualcomm.com \
--to=rmani@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).