From: greearb@candelatech.com
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Ben Greear <greearb@candelatech.com>
Subject: [PATCH 20/21] ath10k: read firmware crash over ioread32 if CE fails.
Date: Mon, 9 May 2016 16:11:14 -0700 [thread overview]
Message-ID: <1462835475-11079-21-git-send-email-greearb@candelatech.com> (raw)
In-Reply-To: <1462835475-11079-1-git-send-email-greearb@candelatech.com>
From: Ben Greear <greearb@candelatech.com>
This might work around problem where sometimes host cannot
access firmware crash over normal CE transport.
Requires CT firmware with matching logic in it's assert
handler (-13 and higher releases).
Signed-off-by: Ben Greear <greearb@candelatech.com>
---
drivers/net/wireless/ath/ath10k/hw.h | 5 ++++
drivers/net/wireless/ath/ath10k/pci.c | 56 ++++++++++++++++++++++++++++++++++-
2 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index d3f37d5..5ff1fac 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -603,6 +603,7 @@ enum ath10k_hw_4addr_pad {
#define PCIE_INTR_ENABLE_ADDRESS 0x0008
#define PCIE_INTR_CAUSE_ADDRESS 0x000c
#define PCIE_INTR_CLR_ADDRESS ar->regs->pcie_intr_clr_address
+#define SCRATCH_2_ADDRESS 0x002c
#define SCRATCH_3_ADDRESS ar->regs->scratch_3_address
#define CPU_INTR_ADDRESS 0x0010
@@ -614,6 +615,10 @@ enum ath10k_hw_4addr_pad {
#define FW_IND_INITIALIZED 2
#define FW_IND_HOST_READY 0x80000000
+/* CT firmware only */
+#define FW_IND_SCRATCH2_WR (1<<14) /* scratch2 has data written to it */
+#define FW_IND_SCRATCH2_RD (1<<15) /* scratch2 has been read (by host) */
+
/* HOST_REG interrupt from firmware */
#define PCIE_INTR_FIRMWARE_MASK ar->regs->pcie_intr_fw_mask
#define PCIE_INTR_CE_MASK_ALL ar->regs->pcie_intr_ce_mask_all
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2adc459..330c150 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1507,6 +1507,54 @@ static void ath10k_pci_dump_exc_stack(struct ath10k *ar,
hi_err_stack);
}
+/* Only CT firmware can do this. Attempt to read crash dump over pci
+ * registers since normal CE transport is not working.
+ */
+static int ath10k_ct_fw_crash_regs_harder(struct ath10k *ar,
+ __le32 *reg_dump_values,
+ int len)
+{
+ u32 val;
+ int i;
+ int q;
+#define MAX_SPIN_TRIES 1000000
+
+ if (!test_bit(ATH10K_FW_FEATURE_WMI_10X_CT,
+ ar->running_fw->fw_file.fw_features)) {
+ return -EINVAL;
+ }
+
+ for (i = 0; i<MAX_SPIN_TRIES; i++) {
+ val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
+ if (val & FW_IND_SCRATCH2_WR)
+ goto pingpong;
+ }
+ return -EBUSY;
+
+pingpong:
+ ath10k_warn(ar, "Trying to read crash dump over pingpong registers.\n");
+ /* Firmware is trying to send us info it seems. */
+ for (q = 0; q<len; q++) {
+ reg_dump_values[q] = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + SCRATCH_2_ADDRESS);
+ val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
+ val |= FW_IND_SCRATCH2_RD; /* tell firmware we read it */
+ val &= ~FW_IND_SCRATCH2_WR; /* clear firmware's write flag */
+ ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, val);
+
+ for (i = 0; i<MAX_SPIN_TRIES; i++) {
+ val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
+ if (val & FW_IND_SCRATCH2_WR)
+ break;
+ }
+ if (!(val & FW_IND_SCRATCH2_WR)) {
+ ath10k_err(ar, "failed to read reg %i via pingpong method.\n",
+ q);
+ return 0; // partial read is better than nothing I guess
+ }
+ }
+ return 0;
+}
+
static void ath10k_pci_dump_registers(struct ath10k *ar,
struct ath10k_fw_crash_data *crash_data)
{
@@ -1520,7 +1568,13 @@ static void ath10k_pci_dump_registers(struct ath10k *ar,
REG_DUMP_COUNT_QCA988X * sizeof(__le32));
if (ret) {
ath10k_err(ar, "failed to read firmware dump area: %d\n", ret);
- return;
+
+ /* Try to read this directly over registers...only works on new
+ * CT firmware.
+ */
+ ret = ath10k_ct_fw_crash_regs_harder(ar, reg_dump_values, REG_DUMP_COUNT_QCA988X);
+ if (ret)
+ return;
}
BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4);
--
2.4.3
next prev parent reply other threads:[~2016-05-09 23:11 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 23:10 [PATCH 00/21] ath10k patches, generic and CT firmware related greearb
2016-05-09 23:10 ` [PATCH 01/21] ath10k: Fix crash related to printing features greearb
2016-05-09 23:10 ` [PATCH 02/21] ath10k: fix typo in logging message greearb
2016-05-09 23:10 ` [PATCH 03/21] ath10k: Support setting debug mask from driver code greearb
2016-05-11 10:40 ` Michal Kazior
2016-05-11 15:10 ` Ben Greear
2016-05-09 23:10 ` [PATCH 04/21] ath10k: rate-limit packet tx errors greearb
2016-05-09 23:10 ` [PATCH 05/21] ath10k: save firmware debug log messages greearb
2016-05-09 23:11 ` [PATCH 06/21] ath10k: save firmware stacks upon firmware crash greearb
2016-05-09 23:11 ` [PATCH 07/21] ath10k: save firmware RAM and ROM BSS sections on crash greearb
2016-05-09 23:11 ` [PATCH 08/21] ath10k: make firmware text debug messages more verbose greearb
2016-05-09 23:11 ` [PATCH 09/21] ath10k: print fw debug messages in hex greearb
2016-05-09 23:11 ` [PATCH 10/21] ath10k: support logging ath10k_info as KERN_DEBUG greearb
2016-05-09 23:11 ` [PATCH 11/21] ath10k: add fw-powerup-fail to ethtool stats greearb
2016-05-09 23:11 ` [PATCH 12/21] ath10k: Support up to 64 vdevs greearb
2016-05-09 23:11 ` [PATCH 13/21] ath10k: Document cycle count related counters greearb
2016-05-11 10:24 ` Michal Kazior
2016-05-09 23:11 ` [PATCH 14/21] ath10k: Add tx/rx bytes, cycle counters to ethtool stats greearb
2016-05-09 23:11 ` [PATCH 15/21] ath10k: support CT firmware flag greearb
2016-05-10 7:20 ` Mohammed Shafi Shajakhan
2016-05-10 14:52 ` Ben Greear
2016-05-09 23:11 ` [PATCH 16/21] ath10k: Support 32+ stations greearb
2016-05-09 23:11 ` [PATCH 17/21] ath10k: Enable detecting failure to install key in firmware (CT) greearb
2016-05-09 23:11 ` [PATCH 18/21] ath10k: Note limitation on beaconing vdevs greearb
2016-05-09 23:11 ` [PATCH 19/21] ath10k: Enable adhoc mode for CT firmware greearb
2016-05-09 23:11 ` greearb [this message]
2016-05-09 23:11 ` [PATCH 21/21] ath10k: Read dbglog buffers over register ping-pong greearb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462835475-11079-21-git-send-email-greearb@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).