linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amitkumar Karwar <amitkarwar@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org,
	Amitkumar Karwar <amit.karwar@redpinesignals.com>,
	Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [v2 00/17] rsi: station enhancements
Date: Mon, 10 Jul 2017 18:10:31 +0530	[thread overview]
Message-ID: <1499690448-9956-1-git-send-email-amitkarwar@gmail.com> (raw)

From: Amitkumar Karwar <amit.karwar@redpinesignals.com>

We have internal management frames(commands) sent to firmware for
various configurations. This patch defines some common structures
which can be shared by those frames. Key handling and regulatory
enhancements are also includesd. With this patch series included,
station can connect to security enabled AP and send/receive data.

Changes in v2:
v1 patch series is rebased to latest code. v1 fails to apply, as
below patch is merged recently.
b952f4dff27 ("net: manual clean code which call skb_put_[data:zero]")

Prameela Rani Garnepudi (17):
  rsi: add common structures needed for command packets
  rsi: immediate wakeup bit and priority for TX command packets
  rsi: Update in tx command frame radio capabilities
  rsi: remove unnecessary check for 802.11 management packet
  rsi: Update peer notify command frame
  rsi: Update aggregation parameters command frame
  rsi: Update baseband RF programming frame
  rsi: update set_channel command frame
  rsi: update vap capabilities command frame
  rsi: update set_key command frame
  rsi: set_key enhancements
  rsi: update autorate request command frame
  rsi: block/unblock data queues as per connection status
  rsi: update tx command frame block/unblock data
  rsi: Remove internal header from Tx status skb
  rsi: Send rx filter frame to device when interface is down
  rsi: regulatory enhancements

 drivers/net/wireless/rsi/rsi_91x_mac80211.c |  63 ++++-
 drivers/net/wireless/rsi/rsi_91x_mgmt.c     | 380 ++++++++++++++--------------
 drivers/net/wireless/rsi/rsi_main.h         |  18 +-
 drivers/net/wireless/rsi/rsi_mgmt.h         | 143 ++++++++++-
 4 files changed, 399 insertions(+), 205 deletions(-)

-- 
2.7.4

             reply	other threads:[~2017-07-10 12:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-10 12:40 Amitkumar Karwar [this message]
2017-07-10 12:40 ` [v2 01/17] rsi: add common structures needed for command packets Amitkumar Karwar
2017-07-28 14:27   ` [v2,01/17] " Kalle Valo
2017-07-10 12:40 ` [v2 02/17] rsi: immediate wakeup bit and priority for TX " Amitkumar Karwar
2017-07-10 12:40 ` [v2 03/17] rsi: Update in tx command frame radio capabilities Amitkumar Karwar
2017-07-10 12:40 ` [v2 04/17] rsi: remove unnecessary check for 802.11 management packet Amitkumar Karwar
2017-07-10 12:40 ` [v2 05/17] rsi: Update peer notify command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 06/17] rsi: Update aggregation parameters " Amitkumar Karwar
2017-07-10 12:40 ` [v2 07/17] rsi: Update baseband RF programming frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 08/17] rsi: update set_channel command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 09/17] rsi: update vap capabilities " Amitkumar Karwar
2017-07-10 12:40 ` [v2 10/17] rsi: update set_key " Amitkumar Karwar
2017-07-10 12:40 ` [v2 11/17] rsi: set_key enhancements Amitkumar Karwar
2017-07-10 12:40 ` [v2 12/17] rsi: update autorate request command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 13/17] rsi: block/unblock data queues as per connection status Amitkumar Karwar
2017-07-10 12:40 ` [v2 14/17] rsi: update tx command frame block/unblock data Amitkumar Karwar
2017-07-10 12:40 ` [v2 15/17] rsi: Remove internal header from Tx status skb Amitkumar Karwar
2017-07-10 12:40 ` [v2 16/17] rsi: Send rx filter frame to device when interface is down Amitkumar Karwar
2017-07-10 12:40 ` [v2 17/17] rsi: regulatory enhancements Amitkumar Karwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499690448-9956-1-git-send-email-amitkarwar@gmail.com \
    --to=amitkarwar@gmail.com \
    --cc=amit.karwar@redpinesignals.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=prameela.j04cs@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).