linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amitkumar Karwar <amitkarwar@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org,
	Amitkumar Karwar <amit.karwar@redpinesignals.com>,
	Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [v2 02/17] rsi: immediate wakeup bit and priority for TX command packets
Date: Mon, 10 Jul 2017 18:10:33 +0530	[thread overview]
Message-ID: <1499690448-9956-3-git-send-email-amitkarwar@gmail.com> (raw)
In-Reply-To: <1499690448-9956-1-git-send-email-amitkarwar@gmail.com>

From: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>

For all TX command packets immediate wakeup bit needs to be
set in descriptor. This will make sure device will wakeup if it
is in any sleep state. Priority of the packet is also set.

Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
---
 drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++
 drivers/net/wireless/rsi/rsi_mgmt.h     | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index ebd1e56..68771b0 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -266,11 +266,14 @@ static int rsi_send_internal_mgmt_frame(struct rsi_common *common,
 					struct sk_buff *skb)
 {
 	struct skb_info *tx_params;
+	struct rsi_cmd_desc *desc;
 
 	if (skb == NULL) {
 		rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__);
 		return -ENOMEM;
 	}
+	desc->desc_dword0.len_qno |= cpu_to_le16(DESC_IMMEDIATE_WAKEUP);
+	skb->priority = MGMT_SOFT_Q;
 	tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data;
 	tx_params->flags |= INTERNAL_MGMT_PKT;
 	skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb);
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index 63360c2..6f7f181 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -229,6 +229,7 @@ struct rsi_mac_frame {
 #define EOSP_INDICATION			BIT(5)
 #define REQUIRE_TSF_SYNC_CONFIRM	BIT(6)
 #define ENCAP_MGMT_PKT			BIT(7)
+#define DESC_IMMEDIATE_WAKEUP		BIT(15)
 
 struct rsi_cmd_desc_dword0 {
 	__le16 len_qno;
-- 
2.7.4

  parent reply	other threads:[~2017-07-10 12:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-10 12:40 [v2 00/17] rsi: station enhancements Amitkumar Karwar
2017-07-10 12:40 ` [v2 01/17] rsi: add common structures needed for command packets Amitkumar Karwar
2017-07-28 14:27   ` [v2,01/17] " Kalle Valo
2017-07-10 12:40 ` Amitkumar Karwar [this message]
2017-07-10 12:40 ` [v2 03/17] rsi: Update in tx command frame radio capabilities Amitkumar Karwar
2017-07-10 12:40 ` [v2 04/17] rsi: remove unnecessary check for 802.11 management packet Amitkumar Karwar
2017-07-10 12:40 ` [v2 05/17] rsi: Update peer notify command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 06/17] rsi: Update aggregation parameters " Amitkumar Karwar
2017-07-10 12:40 ` [v2 07/17] rsi: Update baseband RF programming frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 08/17] rsi: update set_channel command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 09/17] rsi: update vap capabilities " Amitkumar Karwar
2017-07-10 12:40 ` [v2 10/17] rsi: update set_key " Amitkumar Karwar
2017-07-10 12:40 ` [v2 11/17] rsi: set_key enhancements Amitkumar Karwar
2017-07-10 12:40 ` [v2 12/17] rsi: update autorate request command frame Amitkumar Karwar
2017-07-10 12:40 ` [v2 13/17] rsi: block/unblock data queues as per connection status Amitkumar Karwar
2017-07-10 12:40 ` [v2 14/17] rsi: update tx command frame block/unblock data Amitkumar Karwar
2017-07-10 12:40 ` [v2 15/17] rsi: Remove internal header from Tx status skb Amitkumar Karwar
2017-07-10 12:40 ` [v2 16/17] rsi: Send rx filter frame to device when interface is down Amitkumar Karwar
2017-07-10 12:40 ` [v2 17/17] rsi: regulatory enhancements Amitkumar Karwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499690448-9956-3-git-send-email-amitkarwar@gmail.com \
    --to=amitkarwar@gmail.com \
    --cc=amit.karwar@redpinesignals.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=prameela.j04cs@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).