From: <mpubbise@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCHv2 3/3] ath10k: push peer type to target for TDLS peers
Date: Tue, 18 Jul 2017 17:28:14 +0530 [thread overview]
Message-ID: <1500379094-2373-4-git-send-email-mpubbise@qti.qualcomm.com> (raw)
In-Reply-To: <1500379094-2373-1-git-send-email-mpubbise@qti.qualcomm.com>
From: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
WMI interface for all the firmwares(except QCA6174) does not include the
type of peer(default/bss/tdls) requested during peer creation, therefore
target creates a default peer.
TDLS implementation on 10.4 firmware requires host to configure the
peer type(tdls) for TDLS peers. This patch adds peer type parameter to the
existing WMI interface for peer creation to accommodate this requirement.
Tested this change on QCA9888(10.4-3.5.1-00018) and QCA988x(10.2.4.70.9-2)
with ping tests for AP/STA modes.
Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c91d804..b5e5a9e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -6500,6 +6500,7 @@ void ath10k_wmi_start_scan_init(struct ath10k *ar,
cmd = (struct wmi_peer_create_cmd *)skb->data;
cmd->vdev_id = __cpu_to_le32(vdev_id);
ether_addr_copy(cmd->peer_macaddr.addr, peer_addr);
+ cmd->peer_type = __cpu_to_le32(peer_type);
ath10k_dbg(ar, ATH10K_DBG_WMI,
"wmi peer create vdev_id %d peer_addr %pM\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index da0e719..54dabf4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5876,6 +5876,7 @@ struct wmi_tbtt_offset_event {
struct wmi_peer_create_cmd {
__le32 vdev_id;
struct wmi_mac_addr peer_macaddr;
+ __le32 peer_type;
} __packed;
enum wmi_peer_type {
--
1.7.9.5
prev parent reply other threads:[~2017-07-18 11:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 11:58 [PATCHv2 0/3] TDLS support on 10.4 firmware mpubbise
2017-07-18 11:58 ` [PATCHv2 1/3] ath10k: extend wmi service map to accommodate new services mpubbise
2017-08-03 11:37 ` [PATCHv2, " Kalle Valo
2017-07-18 11:58 ` [PATCHv2 2/3] ath10k: add tdls support for 10.4 firmwares mpubbise
2017-07-28 11:48 ` [PATCHv2,2/3] " Kalle Valo
2017-07-18 11:58 ` mpubbise [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500379094-2373-4-git-send-email-mpubbise@qti.qualcomm.com \
--to=mpubbise@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).