From: Omer Efrat <omer.efrat@tandemg.com>
To: linux-wireless@vger.kernel.org, devel@driverdev.osuosl.org
Cc: Omer Efrat <omer.efrat@tandemg.com>
Subject: [PATCH v3 5/5] staging: use BIT_ULL for NL80211_STA_INFO_* attribute types
Date: Mon, 18 Jun 2018 17:18:11 +0300 [thread overview]
Message-ID: <1529331491-1331-1-git-send-email-omer.efrat@tandemg.com> (raw)
The BIT macro uses unsigned long which some architectures handle as 32 bit
and therefore might cause macro's shift to overflow when used on a value
equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards).
Since 'filled' member in station_info changed to u64, BIT_ULL macro
should be used with all NL80211_STA_INFO_* attribute types instead of BIT
to prevent future possible bugs when one will use BIT macro for higher
attributes by mistake.
This commit cleans up all usages of BIT macro with the above field
in cfg80211 by changing it to BIT_ULL instead.
Signed-off-by: Omer Efrat <omer.efrat@tandemg.com>
---
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 10 +++++-----
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 14 +++++++-------
drivers/staging/wlan-ng/cfg80211.c | 4 ++--
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
index 02178e2..26b838f 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -1273,16 +1273,16 @@ static int cfg80211_rtw_get_station(struct wiphy *wiphy,
goto exit;
}
- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
sinfo->signal = translate_percentage_to_dbm(padapter->recvpriv.signal_strength);
- sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
sinfo->txrate.legacy = rtw_get_cur_max_rate(padapter);
- sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS);
sinfo->rx_packets = sta_rx_data_pkts(psta);
- sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_PACKETS);
sinfo->tx_packets = psta->sta_stats.tx_pkts;
}
@@ -3013,7 +3013,7 @@ static int cfg80211_rtw_dump_station(struct wiphy *wiphy, struct net_device *nde
goto exit;
}
memcpy(mac, psta->hwaddr, ETH_ALEN);
- sinfo->filled = BIT(NL80211_STA_INFO_SIGNAL);
+ sinfo->filled = BIT_ULL(NL80211_STA_INFO_SIGNAL);
sinfo->signal = psta->rssi;
exit:
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index e248702..13d3918 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -1141,7 +1141,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev,
return -ENOENT;
}
- sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_INACTIVE_TIME);
wilc_get_inactive_time(vif, mac, &inactive_time);
sinfo->inactive_time = 1000 * inactive_time;
@@ -1150,11 +1150,11 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev,
wilc_get_statistics(vif, &stats);
- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL) |
- BIT(NL80211_STA_INFO_RX_PACKETS) |
- BIT(NL80211_STA_INFO_TX_PACKETS) |
- BIT(NL80211_STA_INFO_TX_FAILED) |
- BIT(NL80211_STA_INFO_TX_BITRATE);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL) |
+ BIT_ULL(NL80211_STA_INFO_RX_PACKETS) |
+ BIT_ULL(NL80211_STA_INFO_TX_PACKETS) |
+ BIT_ULL(NL80211_STA_INFO_TX_FAILED) |
+ BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
sinfo->signal = stats.rssi;
sinfo->rx_packets = stats.rx_cnt;
@@ -1775,7 +1775,7 @@ static int dump_station(struct wiphy *wiphy, struct net_device *dev,
priv = wiphy_priv(wiphy);
vif = netdev_priv(priv->dev);
- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
wilc_get_rssi(vif, &sinfo->signal);
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 4291225..07c52e3 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -282,9 +282,9 @@ static int prism2_get_station(struct wiphy *wiphy, struct net_device *dev,
if (result == 0) {
sinfo->txrate.legacy = quality.txrate.data;
- sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
sinfo->signal = quality.level.data;
- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
}
return result;
--
2.7.4
next reply other threads:[~2018-06-18 14:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 14:18 Omer Efrat [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-06-17 10:07 [PATCH v3 5/5] staging: use BIT_ULL for NL80211_STA_INFO_* attribute types Omer Efrat
2018-06-17 10:24 ` Greg KH
2018-06-18 7:29 ` Kalle Valo
2018-06-18 7:40 ` Greg KH
2018-06-18 13:11 ` Kalle Valo
2018-06-18 13:22 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529331491-1331-1-git-send-email-omer.efrat@tandemg.com \
--to=omer.efrat@tandemg.com \
--cc=devel@driverdev.osuosl.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).