linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Maya Erez <merez@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com
Subject: [PATCH v4 8/8] wil6210: remove crash dump collection from OTP section
Date: Fri, 22 Jun 2018 08:49:23 +0300	[thread overview]
Message-ID: <1529646563-18221-9-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1529646563-18221-1-git-send-email-merez@codeaurora.org>

In some cases where the device is stuck, reading from OTP
can timeout. As OTP section is known there is no need to read
it during device crash dump collection.
Adding a new field to struct fw_map to indicate if to include
this section in crash dump collection.

Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wil6210.h        |  1 +
 drivers/net/wireless/ath/wil6210/wil_crash_dump.c |  5 +-
 drivers/net/wireless/ath/wil6210/wmi.c            | 86 +++++++++++------------
 3 files changed, 47 insertions(+), 45 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index e639ba7..d963c76 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -403,6 +403,7 @@ struct fw_map {
 	u32 host; /* PCI/Host address - BAR0 + 0x880000 */
 	const char *name; /* for debugfs */
 	bool fw; /* true if FW mapping, false if UCODE mapping */
+	bool crash_dump; /* true if should be dumped during crash dump */
 };
 
 /* array size should be in sync with actual definition in the wmi.c */
diff --git a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
index 1ed3306..dc33a0b 100644
--- a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
+++ b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2015,2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -36,7 +37,7 @@ static int wil_fw_get_crash_dump_bounds(struct wil6210_priv *wil,
 	for (i = 1; i < ARRAY_SIZE(fw_mapping); i++) {
 		map = &fw_mapping[i];
 
-		if (!map->fw)
+		if (!map->crash_dump)
 			continue;
 
 		if (map->host < host_min)
@@ -85,7 +86,7 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
 	for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
 		map = &fw_mapping[i];
 
-		if (!map->fw)
+		if (!map->crash_dump)
 			continue;
 
 		data = (void * __force)wil->csr + HOSTADDR(map->host);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 0370b7e..71056c8 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -89,28 +89,28 @@
  */
 const struct fw_map sparrow_fw_mapping[] = {
 	/* FW code RAM 256k */
-	{0x000000, 0x040000, 0x8c0000, "fw_code", true},
+	{0x000000, 0x040000, 0x8c0000, "fw_code", true, true},
 	/* FW data RAM 32k */
-	{0x800000, 0x808000, 0x900000, "fw_data", true},
+	{0x800000, 0x808000, 0x900000, "fw_data", true, true},
 	/* periph data 128k */
-	{0x840000, 0x860000, 0x908000, "fw_peri", true},
+	{0x840000, 0x860000, 0x908000, "fw_peri", true, true},
 	/* various RGF 40k */
-	{0x880000, 0x88a000, 0x880000, "rgf", true},
+	{0x880000, 0x88a000, 0x880000, "rgf", true, true},
 	/* AGC table   4k */
-	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true, true},
 	/* Pcie_ext_rgf 4k */
-	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true, true},
 	/* mac_ext_rgf 512b */
-	{0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext", true},
+	{0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext", true, true},
 	/* upper area 548k */
-	{0x8c0000, 0x949000, 0x8c0000, "upper", true},
+	{0x8c0000, 0x949000, 0x8c0000, "upper", true, true},
 	/* UCODE areas - accessible by debugfs blobs but not by
 	 * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
 	 */
 	/* ucode code RAM 128k */
-	{0x000000, 0x020000, 0x920000, "uc_code", false},
+	{0x000000, 0x020000, 0x920000, "uc_code", false, false},
 	/* ucode data RAM 16k */
-	{0x800000, 0x804000, 0x940000, "uc_data", false},
+	{0x800000, 0x804000, 0x940000, "uc_data", false, false},
 };
 
 /**
@@ -118,7 +118,7 @@
  * it is a bit larger to support extra features
  */
 const struct fw_map sparrow_d0_mac_rgf_ext = {
-	0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true
+	0x88c000, 0x88c500, 0x88c000, "mac_rgf_ext", true, true
 };
 
 /**
@@ -134,34 +134,34 @@
  */
 const struct fw_map talyn_fw_mapping[] = {
 	/* FW code RAM 1M */
-	{0x000000, 0x100000, 0x900000, "fw_code", true},
+	{0x000000, 0x100000, 0x900000, "fw_code", true, true},
 	/* FW data RAM 128k */
-	{0x800000, 0x820000, 0xa00000, "fw_data", true},
+	{0x800000, 0x820000, 0xa00000, "fw_data", true, true},
 	/* periph. data RAM 96k */
-	{0x840000, 0x858000, 0xa20000, "fw_peri", true},
+	{0x840000, 0x858000, 0xa20000, "fw_peri", true, true},
 	/* various RGF 40k */
-	{0x880000, 0x88a000, 0x880000, "rgf", true},
+	{0x880000, 0x88a000, 0x880000, "rgf", true, true},
 	/* AGC table 4k */
-	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true, true},
 	/* Pcie_ext_rgf 4k */
-	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true, true},
 	/* mac_ext_rgf 1344b */
-	{0x88c000, 0x88c540, 0x88c000, "mac_rgf_ext", true},
+	{0x88c000, 0x88c540, 0x88c000, "mac_rgf_ext", true, true},
 	/* ext USER RGF 4k */
-	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
+	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true, true},
 	/* OTP 4k */
-	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
+	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true, false},
 	/* DMA EXT RGF 64k */
-	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
+	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true, true},
 	/* upper area 1536k */
-	{0x900000, 0xa80000, 0x900000, "upper", true},
+	{0x900000, 0xa80000, 0x900000, "upper", true, true},
 	/* UCODE areas - accessible by debugfs blobs but not by
 	 * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
 	 */
 	/* ucode code RAM 256k */
-	{0x000000, 0x040000, 0xa38000, "uc_code", false},
+	{0x000000, 0x040000, 0xa38000, "uc_code", false, false},
 	/* ucode data RAM 32k */
-	{0x800000, 0x808000, 0xa78000, "uc_data", false},
+	{0x800000, 0x808000, 0xa78000, "uc_data", false, false},
 };
 
 /**
@@ -177,46 +177,46 @@
  */
 const struct fw_map talyn_mb_fw_mapping[] = {
 	/* FW code RAM 768k */
-	{0x000000, 0x0c0000, 0x900000, "fw_code", true},
+	{0x000000, 0x0c0000, 0x900000, "fw_code", true, true},
 	/* FW data RAM 128k */
-	{0x800000, 0x820000, 0xa00000, "fw_data", true},
+	{0x800000, 0x820000, 0xa00000, "fw_data", true, true},
 	/* periph. data RAM 96k */
-	{0x840000, 0x858000, 0xa20000, "fw_peri", true},
+	{0x840000, 0x858000, 0xa20000, "fw_peri", true, true},
 	/* various RGF 40k */
-	{0x880000, 0x88a000, 0x880000, "rgf", true},
+	{0x880000, 0x88a000, 0x880000, "rgf", true, true},
 	/* AGC table 4k */
-	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true, true},
 	/* Pcie_ext_rgf 4k */
-	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true, true},
 	/* mac_ext_rgf 2256b */
-	{0x88c000, 0x88c8d0, 0x88c000, "mac_rgf_ext", true},
+	{0x88c000, 0x88c8d0, 0x88c000, "mac_rgf_ext", true, true},
 	/* ext USER RGF 4k */
-	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
+	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true, true},
 	/* SEC PKA 16k */
-	{0x890000, 0x894000, 0x890000, "sec_pka", true},
+	{0x890000, 0x894000, 0x890000, "sec_pka", true, true},
 	/* SEC KDF RGF 3096b */
-	{0x898000, 0x898c18, 0x898000, "sec_kdf_rgf", true},
+	{0x898000, 0x898c18, 0x898000, "sec_kdf_rgf", true, true},
 	/* SEC MAIN 2124b */
-	{0x89a000, 0x89a84c, 0x89a000, "sec_main", true},
+	{0x89a000, 0x89a84c, 0x89a000, "sec_main", true, true},
 	/* OTP 4k */
-	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
+	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true, false},
 	/* DMA EXT RGF 64k */
-	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
+	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true, true},
 	/* DUM USER RGF 528b */
-	{0x8c0000, 0x8c0210, 0x8c0000, "dum_user_rgf", true},
+	{0x8c0000, 0x8c0210, 0x8c0000, "dum_user_rgf", true, true},
 	/* DMA OFU 296b */
-	{0x8c2000, 0x8c2128, 0x8c2000, "dma_ofu", true},
+	{0x8c2000, 0x8c2128, 0x8c2000, "dma_ofu", true, true},
 	/* ucode debug 4k */
-	{0x8c3000, 0x8c4000, 0x8c3000, "ucode_debug", true},
+	{0x8c3000, 0x8c4000, 0x8c3000, "ucode_debug", true, true},
 	/* upper area 1536k */
-	{0x900000, 0xa80000, 0x900000, "upper", true},
+	{0x900000, 0xa80000, 0x900000, "upper", true, true},
 	/* UCODE areas - accessible by debugfs blobs but not by
 	 * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
 	 */
 	/* ucode code RAM 256k */
-	{0x000000, 0x040000, 0xa38000, "uc_code", false},
+	{0x000000, 0x040000, 0xa38000, "uc_code", false, false},
 	/* ucode data RAM 32k */
-	{0x800000, 0x808000, 0xa78000, "uc_data", false},
+	{0x800000, 0x808000, 0xa78000, "uc_data", false, false},
 };
 
 struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
-- 
1.9.1

      parent reply	other threads:[~2018-06-22  5:50 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-22  5:49 [PATCH v4 0/8] wil6210 patches Maya Erez
2018-06-22  5:49 ` [PATCH v4 1/8] wil6210: add support for Talyn-MB (Talyn ver 2.0) device Maya Erez
2018-07-02 14:26   ` [v4, " Kalle Valo
2018-06-22  5:49 ` [PATCH v4 2/8] wil6210: add support for enhanced DMA structures Maya Erez
2018-06-22  5:49 ` [PATCH v4 3/8] wil6210: initialize TX and RX enhanced DMA rings Maya Erez
2018-06-22  5:49 ` [PATCH v4 4/8] wil6210: add support for enhanced DMA TX data flows Maya Erez
2018-06-22  5:49 ` [PATCH v4 5/8] wil6210: add support for enhanced DMA RX " Maya Erez
2018-06-22  5:49 ` [PATCH v4 6/8] wil6210: add support for enhanced DMA debugfs Maya Erez
2018-06-22  5:49 ` [PATCH v4 7/8] wil6210: add support for Talyn-MB boot flow Maya Erez
2018-06-22  5:49 ` Maya Erez [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1529646563-18221-9-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).