From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from s3.sipsolutions.net ([144.76.43.62]:41432 "EHLO sipsolutions.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726274AbeHTMsU (ORCPT ); Mon, 20 Aug 2018 08:48:20 -0400 Message-ID: <1534757602.6287.4.camel@sipsolutions.net> (sfid-20180820_113330_532040_D22952ED) Subject: Re: [PATCH 0/3] Add support for ftm responder configuration From: Johannes Berg To: Pradeep Kumar Chitrapu Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org Date: Mon, 20 Aug 2018 11:33:22 +0200 In-Reply-To: (sfid-20180818_095014_905997_2F2749FC) References: <1534293018-4930-1-git-send-email-pradeepc@codeaurora.org> <1534323867.3547.30.camel@sipsolutions.net> <4aaa3a6185dbd116ba5c1a2ce76b691f@codeaurora.org> <1534407150.3547.58.camel@sipsolutions.net> (sfid-20180818_095014_905997_2F2749FC) Content-Type: text/plain; charset="UTF-8" Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Sat, 2018-08-18 at 00:50 -0700, Pradeep Kumar Chitrapu wrote: > > > I will change the attribute to FLAG type, also add support for LCI/CIVIC > params and repost the patch. Looking at Android (for unrelated reasons), I see that they have a separate "enable FTM responder" command: https://android.googlesource.com/platform/hardware/interfaces/+/master/wifi/1.0/IWifiRttController.hal#158 Is that something you've seen/worked with? If so, how does it match your current approach where FTM responder has to be enabled from the start? Or perhaps this API is independent of AP and starts its own AP? But it doesn't have any setup for the SSID etc., only the channel, so not clear how that'd work? johannes