From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH] ath10k: Advertize beacon_int_min_gcd as 100 while bring up multi vaps
Date: Tue, 18 Sep 2018 12:03:49 +0530 [thread overview]
Message-ID: <1537252429-8655-1-git-send-email-mkenna@codeaurora.org> (raw)
With the latest firmware design, the beacon interval should be
greater than 100 to bring the multiple vaps.
Set beacon_int_min_gcd to 100, when the wmi service
WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT is enabled
in the firmware. If not, beacon_int_min_gcd will be set
to the default value 1.
Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00015
Tested in QCA9888 with firmware ver 10.4-3.5.1-0005
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 25 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 9 +++++++++
2 files changed, 34 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 97548f9..532fc5d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8163,6 +8163,24 @@ void ath10k_mac_destroy(struct ath10k *ar)
},
};
+static const struct
+ieee80211_iface_combination ath10k_10_4_bcn_int_if_comb[] = {
+ {
+ .limits = ath10k_10_4_if_limits,
+ .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits),
+ .max_interfaces = 16,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+ .beacon_int_min_gcd = 100,
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40) |
+ BIT(NL80211_CHAN_WIDTH_80),
+#endif
+ },
+};
+
static void ath10k_get_arvif_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
@@ -8526,6 +8544,13 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb;
ar->hw->wiphy->n_iface_combinations =
ARRAY_SIZE(ath10k_10_4_if_comb);
+ if (test_bit(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
+ ar->wmi.svc_map)) {
+ ar->hw->wiphy->iface_combinations =
+ ath10k_10_4_bcn_int_if_comb;
+ ar->hw->wiphy->n_iface_combinations =
+ ARRAY_SIZE(ath10k_10_4_bcn_int_if_comb);
+ }
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1562294..126eb17 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -204,6 +204,7 @@ enum wmi_service {
WMI_SERVICE_RESET_CHIP,
WMI_SERVICE_SPOOF_MAC_SUPPORT,
WMI_SERVICE_TX_DATA_ACK_RSSI,
+ WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
/* keep last */
WMI_SERVICE_MAX,
@@ -353,6 +354,11 @@ enum wmi_10_4_service {
WMI_10_4_SERVICE_TPC_STATS_FINAL,
WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
+ WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LAGACY,
+ WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
+ WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
+ WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
};
static inline char *wmi_service_name(int service_id)
@@ -467,6 +473,7 @@ static inline char *wmi_service_name(int service_id)
SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
SVCSTR(WMI_SERVICE_RESET_CHIP);
SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
+ SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
default:
return NULL;
}
@@ -777,6 +784,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_TPC_STATS_FINAL, len);
SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
WMI_SERVICE_TX_DATA_ACK_RSSI, len);
+ SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
+ WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
}
#undef SVCMAP
--
1.9.1
next reply other threads:[~2018-09-18 12:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 6:33 Maharaja Kennadyrajan [this message]
2018-09-18 10:44 ` [PATCH] ath10k: Advertize beacon_int_min_gcd as 100 while bring up multi vaps Ben Greear
2018-09-18 12:02 ` Maharaja Kennadyrajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537252429-8655-1-git-send-email-mkenna@codeaurora.org \
--to=mkenna@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).