From: Ajay Singh <ajay.kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: <kvalo@codeaurora.org>, <gregkh@linuxfoundation.org>,
<ganesh.krishna@microchip.com>, <aditya.shankar@microchip.com>,
<venkateswara.kaja@microchip.com>, <claudiu.beznea@microchip.com>,
<adham.abozaeid@microchip.com>,
Ajay Singh <ajay.kathat@microchip.com>
Subject: [PATCH 08/19] wilc: add wilc_wlan.h
Date: Wed, 26 Sep 2018 15:55:14 +0530 [thread overview]
Message-ID: <1537957525-11467-9-git-send-email-ajay.kathat@microchip.com> (raw)
In-Reply-To: <1537957525-11467-1-git-send-email-ajay.kathat@microchip.com>
Moved '/driver/staging/wilc1000/wilc_wlan.h' to '
drivers/net/wireless/microchip/wilc/'.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
drivers/net/wireless/microchip/wilc/wilc_wlan.h | 297 ++++++++++++++++++++++++
1 file changed, 297 insertions(+)
create mode 100644 drivers/net/wireless/microchip/wilc/wilc_wlan.h
diff --git a/drivers/net/wireless/microchip/wilc/wilc_wlan.h b/drivers/net/wireless/microchip/wilc/wilc_wlan.h
new file mode 100644
index 0000000..2766713
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc/wilc_wlan.h
@@ -0,0 +1,297 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_WLAN_H
+#define WILC_WLAN_H
+
+#include <linux/types.h>
+
+/********************************************
+ *
+ * Mac eth header length
+ *
+ ********************************************/
+#define DRIVER_HANDLER_SIZE 4
+#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */
+#define SUB_MSDU_HEADER_LENGTH 14
+#define SNAP_HDR_LEN 8
+#define ETHERNET_HDR_LEN 14
+#define WORD_ALIGNMENT_PAD 0
+
+#define ETH_ETHERNET_HDR_OFFSET (MAX_MAC_HDR_LEN + \
+ SUB_MSDU_HEADER_LENGTH + \
+ SNAP_HDR_LEN - \
+ ETHERNET_HDR_LEN + \
+ WORD_ALIGNMENT_PAD)
+
+#define HOST_HDR_OFFSET 4
+#define ETHERNET_HDR_LEN 14
+#define IP_HDR_LEN 20
+#define IP_HDR_OFFSET ETHERNET_HDR_LEN
+#define UDP_HDR_OFFSET (IP_HDR_LEN + IP_HDR_OFFSET)
+#define UDP_HDR_LEN 8
+#define UDP_DATA_OFFSET (UDP_HDR_OFFSET + UDP_HDR_LEN)
+#define ETH_CONFIG_PKT_HDR_LEN UDP_DATA_OFFSET
+
+#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \
+ ETH_CONFIG_PKT_HDR_LEN)
+
+/********************************************
+ *
+ * Register Defines
+ *
+ ********************************************/
+#define WILC_PERIPH_REG_BASE 0x1000
+#define WILC_CHANGING_VIR_IF 0x108c
+#define WILC_CHIPID WILC_PERIPH_REG_BASE
+#define WILC_GLB_RESET_0 (WILC_PERIPH_REG_BASE + 0x400)
+#define WILC_PIN_MUX_0 (WILC_PERIPH_REG_BASE + 0x408)
+#define WILC_HOST_TX_CTRL (WILC_PERIPH_REG_BASE + 0x6c)
+#define WILC_HOST_RX_CTRL_0 (WILC_PERIPH_REG_BASE + 0x70)
+#define WILC_HOST_RX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x74)
+#define WILC_HOST_VMM_CTL (WILC_PERIPH_REG_BASE + 0x78)
+#define WILC_HOST_RX_CTRL (WILC_PERIPH_REG_BASE + 0x80)
+#define WILC_HOST_RX_EXTRA_SIZE (WILC_PERIPH_REG_BASE + 0x84)
+#define WILC_HOST_TX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x88)
+#define WILC_MISC (WILC_PERIPH_REG_BASE + 0x428)
+#define WILC_INTR_REG_BASE (WILC_PERIPH_REG_BASE + 0xa00)
+#define WILC_INTR_ENABLE WILC_INTR_REG_BASE
+#define WILC_INTR2_ENABLE (WILC_INTR_REG_BASE + 4)
+
+#define WILC_INTR_POLARITY (WILC_INTR_REG_BASE + 0x10)
+#define WILC_INTR_TYPE (WILC_INTR_REG_BASE + 0x20)
+#define WILC_INTR_CLEAR (WILC_INTR_REG_BASE + 0x30)
+#define WILC_INTR_STATUS (WILC_INTR_REG_BASE + 0x40)
+
+#define WILC_VMM_TBL_SIZE 64
+#define WILC_VMM_TX_TBL_BASE 0x150400
+#define WILC_VMM_RX_TBL_BASE 0x150500
+
+#define WILC_VMM_BASE 0x150000
+#define WILC_VMM_CORE_CTL WILC_VMM_BASE
+#define WILC_VMM_TBL_CTL (WILC_VMM_BASE + 0x4)
+#define WILC_VMM_TBL_ENTRY (WILC_VMM_BASE + 0x8)
+#define WILC_VMM_TBL0_SIZE (WILC_VMM_BASE + 0xc)
+#define WILC_VMM_TO_HOST_SIZE (WILC_VMM_BASE + 0x10)
+#define WILC_VMM_CORE_CFG (WILC_VMM_BASE + 0x14)
+#define WILC_VMM_TBL_ACTIVE (WILC_VMM_BASE + 040)
+#define WILC_VMM_TBL_STATUS (WILC_VMM_BASE + 0x44)
+
+#define WILC_SPI_REG_BASE 0xe800
+#define WILC_SPI_CTL WILC_SPI_REG_BASE
+#define WILC_SPI_MASTER_DMA_ADDR (WILC_SPI_REG_BASE + 0x4)
+#define WILC_SPI_MASTER_DMA_COUNT (WILC_SPI_REG_BASE + 0x8)
+#define WILC_SPI_SLAVE_DMA_ADDR (WILC_SPI_REG_BASE + 0xc)
+#define WILC_SPI_SLAVE_DMA_COUNT (WILC_SPI_REG_BASE + 0x10)
+#define WILC_SPI_TX_MODE (WILC_SPI_REG_BASE + 0x20)
+#define WILC_SPI_PROTOCOL_CONFIG (WILC_SPI_REG_BASE + 0x24)
+#define WILC_SPI_INTR_CTL (WILC_SPI_REG_BASE + 0x2c)
+
+#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - \
+ WILC_SPI_REG_BASE)
+
+#define WILC_AHB_DATA_MEM_BASE 0x30000
+#define WILC_AHB_SHARE_MEM_BASE 0xd0000
+
+#define WILC_VMM_TBL_RX_SHADOW_BASE WILC_AHB_SHARE_MEM_BASE
+#define WILC_VMM_TBL_RX_SHADOW_SIZE 256
+
+#define WILC_GP_REG_0 0x149c
+#define WILC_GP_REG_1 0x14a0
+
+#define WILC_HAVE_SDIO_IRQ_GPIO BIT(0)
+#define WILC_HAVE_USE_PMU BIT(1)
+#define WILC_HAVE_SLEEP_CLK_SRC_RTC BIT(2)
+#define WILC_HAVE_SLEEP_CLK_SRC_XO BIT(3)
+#define WILC_HAVE_EXT_PA_INV_TX_RX BIT(4)
+#define WILC_HAVE_LEGACY_RF_SETTINGS BIT(5)
+#define WILC_HAVE_XTAL_24 BIT(6)
+#define WILC_HAVE_DISABLE_WILC_UART BIT(7)
+#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE BIT(8)
+
+/********************************************
+ *
+ * Wlan Defines
+ *
+ ********************************************/
+#define WILC_CFG_PKT 1
+#define WILC_NET_PKT 0
+#define WILC_MGMT_PKT 2
+
+#define WILC_CFG_SET 1
+#define WILC_CFG_QUERY 0
+
+#define WILC_CFG_RSP 1
+#define WILC_CFG_RSP_STATUS 2
+#define WILC_CFG_RSP_SCAN 3
+
+#define WILC_PLL_TO_SDIO 4
+#define WILC_PLL_TO_SPI 2
+#define ABORT_INT BIT(31)
+
+#define LINUX_RX_SIZE (96 * 1024)
+#define LINUX_TX_SIZE (64 * 1024)
+
+#define MODALIAS "WILC_SPI"
+#define GPIO_NUM 0x44
+/*******************************************/
+/* E0 and later Interrupt flags. */
+/*******************************************/
+/*******************************************/
+/* E0 and later Interrupt flags. */
+/* IRQ Status word */
+/* 15:0 = DMA count in words. */
+/* 16: INT0 flag */
+/* 17: INT1 flag */
+/* 18: INT2 flag */
+/* 19: INT3 flag */
+/* 20: INT4 flag */
+/* 21: INT5 flag */
+/*******************************************/
+#define IRG_FLAGS_OFFSET 16
+#define IRQ_DMA_WD_CNT_MASK ((1ul << IRG_FLAGS_OFFSET) - 1)
+#define INT_0 BIT(IRG_FLAGS_OFFSET)
+#define INT_1 BIT(IRG_FLAGS_OFFSET + 1)
+#define INT_2 BIT(IRG_FLAGS_OFFSET + 2)
+#define INT_3 BIT(IRG_FLAGS_OFFSET + 3)
+#define INT_4 BIT(IRG_FLAGS_OFFSET + 4)
+#define INT_5 BIT(IRG_FLAGS_OFFSET + 5)
+#define MAX_NUM_INT 6
+
+/*******************************************/
+/* E0 and later Interrupt flags. */
+/* IRQ Clear word */
+/* 0: Clear INT0 */
+/* 1: Clear INT1 */
+/* 2: Clear INT2 */
+/* 3: Clear INT3 */
+/* 4: Clear INT4 */
+/* 5: Clear INT5 */
+/* 6: Select VMM table 1 */
+/* 7: Select VMM table 2 */
+/* 8: Enable VMM */
+/*******************************************/
+#define CLR_INT0 BIT(0)
+#define CLR_INT1 BIT(1)
+#define CLR_INT2 BIT(2)
+#define CLR_INT3 BIT(3)
+#define CLR_INT4 BIT(4)
+#define CLR_INT5 BIT(5)
+#define SEL_VMM_TBL0 BIT(6)
+#define SEL_VMM_TBL1 BIT(7)
+#define EN_VMM BIT(8)
+
+#define DATA_INT_EXT INT_0
+#define PLL_INT_EXT INT_1
+#define SLEEP_INT_EXT INT_2
+#define ALL_INT_EXT (DATA_INT_EXT | PLL_INT_EXT | SLEEP_INT_EXT)
+#define NUM_INT_EXT 3
+
+#define DATA_INT_CLR CLR_INT0
+#define PLL_INT_CLR CLR_INT1
+#define SLEEP_INT_CLR CLR_INT2
+
+#define ENABLE_RX_VMM (SEL_VMM_TBL1 | EN_VMM)
+#define ENABLE_TX_VMM (SEL_VMM_TBL0 | EN_VMM)
+/*time for expiring the completion of cfg packets*/
+#define CFG_PKTS_TIMEOUT 2000
+
+#define IS_MANAGMEMENT 0x100
+#define IS_MANAGMEMENT_CALLBACK 0x080
+#define IS_MGMT_STATUS_SUCCES 0x040
+
+/********************************************
+ *
+ * Tx/Rx Queue Structure
+ *
+ ********************************************/
+
+struct txq_entry_t {
+ struct list_head list;
+ int type;
+ int ack_idx;
+ u8 *buffer;
+ int buffer_size;
+ void *priv;
+ int status;
+ void (*tx_complete_func)(void *priv, int status);
+};
+
+struct rxq_entry_t {
+ struct list_head list;
+ u8 *buffer;
+ int buffer_size;
+};
+
+/********************************************
+ *
+ * Host IF Structure
+ *
+ ********************************************/
+struct wilc;
+struct wilc_hif_func {
+ int (*hif_init)(struct wilc *wilc, bool resume);
+ int (*hif_deinit)(struct wilc *wilc);
+ int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
+ int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
+ int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+ int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+ int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
+ int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
+ int (*hif_read_size)(struct wilc *wilc, u32 *size);
+ int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+ int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+ int (*hif_sync_ext)(struct wilc *wilc, int nint);
+ int (*enable_interrupt)(struct wilc *nic);
+ void (*disable_interrupt)(struct wilc *nic);
+};
+
+#define MAX_CFG_FRAME_SIZE 1468
+
+struct wilc_cfg_frame {
+ u8 wid_header[8];
+ u8 frame[MAX_CFG_FRAME_SIZE];
+};
+
+struct wilc_cfg_rsp {
+ int type;
+ u32 seq_no;
+};
+
+struct wilc;
+struct wilc_vif;
+
+int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
+ u32 buffer_size);
+int wilc_wlan_start(struct wilc *wilc);
+int wilc_wlan_stop(struct wilc *wilc);
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+ u32 buffer_size, wilc_tx_complete_func_t func);
+int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count);
+void wilc_handle_isr(struct wilc *wilc);
+void wilc_wlan_cleanup(struct net_device *dev);
+int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
+ u32 buffer_size, int commit, u32 drv_handler);
+int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
+ u32 drv_handler);
+int wilc_wlan_cfg_get_val(struct wilc *wl, u16 wid, u8 *buffer,
+ u32 buffer_size);
+int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
+ u32 buffer_size, wilc_tx_complete_func_t func);
+void wilc_chip_sleep_manually(struct wilc *wilc);
+
+void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
+int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
+netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+void wilc_wfi_p2p_rx(struct net_device *dev, u8 *buff, u32 size);
+void host_wakeup_notify(struct wilc *wilc);
+void host_sleep_notify(struct wilc *wilc);
+void chip_allow_sleep(struct wilc *wilc);
+void chip_wakeup(struct wilc *wilc);
+int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
+ u32 count, u32 drv);
+#endif
--
2.7.4
next prev parent reply other threads:[~2018-09-26 10:26 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 10:25 [RFC 00/19] wilc: added driver for wilc module Ajay Singh
2018-09-26 10:25 ` [PATCH 01/19] wilc: add coreconfigurator.h Ajay Singh
2018-09-26 10:25 ` [PATCH 02/19] wilc: add coreconfigurator.c Ajay Singh
2018-10-08 14:16 ` Johannes Berg
2018-10-09 9:42 ` Ajay Singh
2018-10-09 10:05 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 03/19] wilc: add host_interface.h Ajay Singh
2018-10-08 14:20 ` Johannes Berg
2018-10-09 10:34 ` Ajay Singh
2018-10-09 10:36 ` Johannes Berg
2018-10-09 11:44 ` Ajay Singh
2018-10-09 11:46 ` Johannes Berg
2018-10-09 12:18 ` Ajay Singh
2018-10-09 18:36 ` Adham.Abozaeid
2018-10-09 19:14 ` Johannes Berg
2018-10-09 20:01 ` Adham.Abozaeid
2018-10-09 20:02 ` Johannes Berg
2018-10-09 20:06 ` Adham.Abozaeid
2018-10-29 14:56 ` Kalle Valo
2018-10-30 3:20 ` Ajay.Kathat
2018-09-26 10:25 ` [PATCH 04/19] wilc: add host_interface.c Ajay Singh
2018-10-08 14:31 ` Johannes Berg
2018-10-10 20:06 ` Adham.Abozaeid
2018-10-11 7:01 ` Johannes Berg
2018-10-12 22:08 ` Adham.Abozaeid
2018-10-18 8:23 ` Johannes Berg
2018-10-18 18:30 ` Adham.Abozaeid
2018-10-19 7:02 ` Johannes Berg
2018-10-19 20:53 ` Adham.Abozaeid
2018-10-29 20:10 ` Johannes Berg
2018-10-29 21:32 ` Adham.Abozaeid
2018-10-29 21:33 ` Johannes Berg
2018-10-11 6:57 ` Ajay Singh
2018-10-10 20:14 ` Johannes Berg
2018-10-12 21:55 ` Adham.Abozaeid
2018-10-18 8:23 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 05/19] wilc: add wilc_wlan_if.h Ajay Singh
2018-10-08 14:33 ` Johannes Berg
2018-10-11 6:59 ` Ajay Singh
2018-09-26 10:25 ` [PATCH 06/19] wilc: add wilc_wlan_cfg.h Ajay Singh
2018-09-26 10:25 ` [PATCH 07/19] wilc: add wilc_wlan_cfg.c Ajay Singh
2018-09-26 10:25 ` Ajay Singh [this message]
2018-09-26 10:25 ` [PATCH 09/19] wilc: add wilc_wlan.c Ajay Singh
2018-09-26 10:25 ` [PATCH 10/19] wilc: add wilc_wfi_netdevice.h Ajay Singh
2018-09-26 10:25 ` [PATCH 11/19] wilc: add wilc_wfi_cfgoperations.h Ajay Singh
2018-09-26 10:25 ` [PATCH 12/19] wilc: add wilc_wfi_cfgoperations.c Ajay Singh
2018-10-08 14:57 ` Johannes Berg
2018-10-09 4:23 ` Adham.Abozaeid
2018-10-09 7:55 ` Johannes Berg
2018-10-09 17:15 ` Adham.Abozaeid
2018-10-19 21:47 ` Adham.Abozaeid
2018-10-29 20:11 ` Johannes Berg
2018-10-29 21:43 ` Adham.Abozaeid
2018-09-26 10:25 ` [PATCH 13/19] wilc: add linux_wlan.c Ajay Singh
2018-10-08 14:41 ` Johannes Berg
2018-10-11 7:00 ` Ajay Singh
2018-10-11 7:03 ` Johannes Berg
2018-10-11 7:26 ` Ajay Singh
2018-09-26 10:25 ` [PATCH 14/19] wilc: add linux_mon.c Ajay Singh
2018-10-08 14:44 ` Johannes Berg
2018-10-11 7:12 ` Ajay Singh
2018-10-11 7:15 ` Johannes Berg
2018-09-26 10:25 ` [PATCH 15/19] wilc: add wilc_spi.c Ajay Singh
2018-09-26 10:25 ` [PATCH 16/19] wilc: add wilc_sdio.c Ajay Singh
2018-09-26 10:25 ` [PATCH 17/19] wilc: updated DT device binding for wilc device Ajay Singh
2018-09-26 10:25 ` [PATCH 18/19] wilc: add Makefile and Kconfig files for wilc compilation Ajay Singh
2018-09-26 10:25 ` [PATCH 19/19] wilc: added wilc module compilation in wireless Makefile & Kconfig Ajay Singh
2018-10-06 12:45 ` [RFC 00/19] wilc: added driver for wilc module Kalle Valo
2018-10-08 5:17 ` Ajay Singh
2018-10-08 7:38 ` Kalle Valo
2018-10-08 18:34 ` Adham.Abozaeid
2018-11-15 14:11 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537957525-11467-9-git-send-email-ajay.kathat@microchip.com \
--to=ajay.kathat@microchip.com \
--cc=adham.abozaeid@microchip.com \
--cc=aditya.shankar@microchip.com \
--cc=claudiu.beznea@microchip.com \
--cc=ganesh.krishna@microchip.com \
--cc=gregkh@linuxfoundation.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=venkateswara.kaja@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).