From: <yhchuang@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <Larry.Finger@lwfinger.net>, <linux-wireless@vger.kernel.org>,
<pkshih@realtek.com>, <tehuang@realtek.com>
Subject: [PATCH v2 12/13] rtw88: Kconfig & Makefile
Date: Fri, 16 Nov 2018 19:31:18 +0800 [thread overview]
Message-ID: <1542367879-28880-13-git-send-email-yhchuang@realtek.com> (raw)
In-Reply-To: <1542367879-28880-1-git-send-email-yhchuang@realtek.com>
From: Yan-Hsuan Chuang <yhchuang@realtek.com>
Kconfig & Makefile for Realtek 802.11ac wireless network chips
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
drivers/net/wireless/realtek/Kconfig | 1 +
drivers/net/wireless/realtek/Makefile | 1 +
drivers/net/wireless/realtek/rtw88/Kconfig | 55 +++++++++++++++++++++++++++++
drivers/net/wireless/realtek/rtw88/Makefile | 19 ++++++++++
4 files changed, 76 insertions(+)
create mode 100644 drivers/net/wireless/realtek/rtw88/Kconfig
create mode 100644 drivers/net/wireless/realtek/rtw88/Makefile
diff --git a/drivers/net/wireless/realtek/Kconfig b/drivers/net/wireless/realtek/Kconfig
index 3db988e..9189fd6 100644
--- a/drivers/net/wireless/realtek/Kconfig
+++ b/drivers/net/wireless/realtek/Kconfig
@@ -14,5 +14,6 @@ if WLAN_VENDOR_REALTEK
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
+source "drivers/net/wireless/realtek/rtw88/Kconfig"
endif # WLAN_VENDOR_REALTEK
diff --git a/drivers/net/wireless/realtek/Makefile b/drivers/net/wireless/realtek/Makefile
index 9c78deb..118af99 100644
--- a/drivers/net/wireless/realtek/Makefile
+++ b/drivers/net/wireless/realtek/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_RTL8180) += rtl818x/
obj-$(CONFIG_RTL8187) += rtl818x/
obj-$(CONFIG_RTLWIFI) += rtlwifi/
obj-$(CONFIG_RTL8XXXU) += rtl8xxxu/
+obj-$(CONFIG_RTW88) += rtw88/
diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig
new file mode 100644
index 0000000..bd68c7c
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/Kconfig
@@ -0,0 +1,55 @@
+menuconfig RTW88
+ tristate "Realtek 802.11ac wireless chips support"
+ depends on MAC80211
+ default y
+ help
+ This module adds support for mac80211-based wireless drivers that
+ enables Realtek IEEE 802.11ac wireless chipsets.
+
+ If you choose to build a module, it'll be called rtw88.
+
+if RTW88
+
+config RTW88_CORE
+ tristate
+
+config RTW88_PCI
+ tristate
+
+config RTW88_8822BE
+ bool "Realtek 8822BE PCI wireless network adapter"
+ depends on PCI
+ select RTW88_CORE
+ select RTW88_PCI
+ help
+ Select this option will enable support for 8822BE chipset
+
+ 802.11ac PCIe wireless network adapter
+
+config RTW88_8822CE
+ bool "Realtek 8822CE PCI wireless network adapter"
+ depends on PCI
+ select RTW88_CORE
+ select RTW88_PCI
+ help
+ Select this option will enable support for 8822CE chipset
+
+ 802.11ac PCIe wireless network adapter
+
+config RTW88_DEBUG
+ bool "Realtek rtw88 debug support"
+ depends on RTW88_CORE
+ help
+ Enable debug support
+
+ If unsure, say Y to simplify debug problems
+
+config RTW88_DEBUGFS
+ bool "Realtek rtw88 debugfs support"
+ depends on RTW88_CORE
+ help
+ Enable debug support
+
+ If unsure, say Y to simplify debug problems
+
+endif
diff --git a/drivers/net/wireless/realtek/rtw88/Makefile b/drivers/net/wireless/realtek/rtw88/Makefile
new file mode 100644
index 0000000..d70782a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtw88/Makefile
@@ -0,0 +1,19 @@
+obj-$(CONFIG_RTW88_CORE) += rtw88.o
+rtw88-y += main.o \
+ mac80211.o \
+ debug.o \
+ tx.o \
+ rx.o \
+ mac.o \
+ phy.o \
+ efuse.o \
+ fw.o \
+ ps.o \
+ sec.o \
+ regd.o
+
+rtw88-$(CONFIG_RTW88_8822BE) += rtw8822b.o rtw8822b_table.o
+rtw88-$(CONFIG_RTW88_8822CE) += rtw8822c.o rtw8822c_table.o
+
+obj-$(CONFIG_RTW88_PCI) += rtwpci.o
+rtwpci-objs := pci.o
--
2.7.4
next prev parent reply other threads:[~2018-11-16 11:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 11:31 [PATCH v2 00/13] rtw88: mac80211 driver for Realtek 802.11ac wireless network chips yhchuang
2018-11-16 11:31 ` [PATCH v2 01/13] rtw88: main files yhchuang
2018-12-07 8:23 ` Tony Chuang
2018-12-13 9:46 ` Kalle Valo
2018-11-16 11:31 ` [PATCH v2 02/13] rtw88: core files yhchuang
2018-11-16 11:31 ` [PATCH v2 03/13] rtw88: hci files yhchuang
2018-11-16 11:31 ` [PATCH v2 04/13] rtw88: trx files yhchuang
2018-11-16 11:31 ` [PATCH v2 05/13] rtw88: mac files yhchuang
2018-11-16 11:31 ` [PATCH v2 06/13] rtw88: fw and efuse files yhchuang
2018-11-16 11:31 ` [PATCH v2 07/13] rtw88: phy files yhchuang
2018-11-16 11:31 ` [PATCH v2 08/13] rtw88: debug files yhchuang
2018-11-16 11:31 ` [PATCH v2 09/13] rtw88: chip files yhchuang
2018-11-16 11:31 ` [PATCH v2 10/13] rtw88: 8822B init table yhchuang
2018-11-16 11:31 ` [PATCH v2 11/13] rtw88: 8822C " yhchuang
2018-11-16 11:31 ` yhchuang [this message]
2018-11-16 11:31 ` [PATCH v2 13/13] rtw88: add support for Realtek 802.11ac wireless chips yhchuang
2019-01-22 21:34 ` Brian Norris
2019-01-28 3:36 ` Tony Chuang
2019-01-28 21:01 ` Brian Norris
2019-01-29 8:59 ` Kalle Valo
2018-11-30 9:37 ` [PATCH v2 00/13] rtw88: mac80211 driver for Realtek 802.11ac wireless network chips Stanislaw Gruszka
2018-12-12 9:07 ` Stanislaw Gruszka
2018-12-13 9:48 ` Kalle Valo
2019-01-08 2:48 ` Tony Chuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542367879-28880-13-git-send-email-yhchuang@realtek.com \
--to=yhchuang@realtek.com \
--cc=Larry.Finger@lwfinger.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=tehuang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).