From: Rajkumar Manoharan <rmanohar@codeaurora.org>
To: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Cc: make-wifi-fast@lists.bufferbloat.net,
Rajkumar Manoharan <rmanohar@codeaurora.org>
Subject: [PATCH v5 0/6] Move TXQ scheduling and airtime fairness into mac80211
Date: Tue, 18 Dec 2018 17:02:05 -0800 [thread overview]
Message-ID: <1545181331-5288-1-git-send-email-rmanohar@codeaurora.org> (raw)
All,
Sorry for the long delay. Here is the consolidated series of mac80211,
ath9k and ath10k changes for moving TXQ scheduling and airtime fairness
into mac80211 and support airtime fairness.
Three main APIs are defined for TXQ scheduling.
- ieee80211_next_txq
- ieee80211_return_txq
- ieee80211_txq_may_transmit
and two APIs for synchronization when the driver wants to iterate
through all TXQs.
- ieee80211_txq_schedule_start
- ieee80211_txq_schedule_end
The earlier discussions:
https://patchwork.kernel.org/project/linux-wireless/list/?series=&submitter=&state=*&q=TXQ+scheduling&archive=both&delegate=
-Rajkumar
v2:
- replaced driver specific airtime default by multiplier
- fixed tab intent
- fixed author and commit log
v3:
- fixed checkpatch warnings and kbuild bot errors.
few of over 80 char warnings are left.
v4:
- Folded Louie's airtime counter reset change
- rebased the series on top of mac80211 tree.
v5:
- fix kbuild-robot errors (s/BIT/BIT_ULL)
Kan Yan (1):
ath10k: reporting estimated tx airtime for fairness
Toke Høiland-Jørgensen (5):
mac80211: Add TXQ scheduling API
cfg80211: Add airtime statistics and settings
mac80211: Add airtime accounting and scheduling to TXQs
ath9k: Switch to mac80211 TXQ scheduling and airtime APIs
ath10k: migrate to mac80211 txq scheduling
drivers/net/wireless/ath/ath10k/core.c | 2 -
drivers/net/wireless/ath/ath10k/core.h | 8 +-
drivers/net/wireless/ath/ath10k/htc.h | 1 -
drivers/net/wireless/ath/ath10k/htt_rx.c | 9 ++
drivers/net/wireless/ath/ath10k/mac.c | 155 +++++++++++-------
drivers/net/wireless/ath/ath10k/txrx.c | 4 +
drivers/net/wireless/ath/ath9k/ath9k.h | 14 --
drivers/net/wireless/ath/ath9k/debug.c | 3 -
drivers/net/wireless/ath/ath9k/debug.h | 8 -
drivers/net/wireless/ath/ath9k/debug_sta.c | 70 ---------
drivers/net/wireless/ath/ath9k/init.c | 3 +-
drivers/net/wireless/ath/ath9k/recv.c | 9 +-
drivers/net/wireless/ath/ath9k/xmit.c | 244 +++++++++--------------------
include/net/cfg80211.h | 10 +-
include/net/mac80211.h | 121 +++++++++++++-
include/uapi/linux/nl80211.h | 15 ++
net/mac80211/agg-tx.c | 2 +-
net/mac80211/cfg.c | 3 +
net/mac80211/debugfs.c | 3 +
net/mac80211/debugfs_sta.c | 68 +++++++-
net/mac80211/driver-ops.h | 9 ++
net/mac80211/ieee80211_i.h | 11 ++
net/mac80211/main.c | 9 ++
net/mac80211/sta_info.c | 46 +++++-
net/mac80211/sta_info.h | 13 ++
net/mac80211/status.c | 6 +
net/mac80211/tx.c | 140 ++++++++++++++++-
net/wireless/nl80211.c | 30 ++++
28 files changed, 662 insertions(+), 354 deletions(-)
--
1.9.1
next reply other threads:[~2018-12-19 1:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 1:02 Rajkumar Manoharan [this message]
2018-12-19 1:02 ` [PATCH v5 1/6] mac80211: Add TXQ scheduling API Rajkumar Manoharan
2018-12-19 1:02 ` [PATCH v5 2/6] cfg80211: Add airtime statistics and settings Rajkumar Manoharan
2018-12-19 1:02 ` [PATCH v5 3/6] mac80211: Add airtime accounting and scheduling to TXQs Rajkumar Manoharan
2018-12-19 15:29 ` kbuild test robot
2018-12-19 1:02 ` [PATCH v5 4/6] ath9k: Switch to mac80211 TXQ scheduling and airtime APIs Rajkumar Manoharan
2019-01-21 16:51 ` Toke Høiland-Jørgensen
2018-12-19 1:02 ` [PATCH v5 5/6] ath10k: migrate to mac80211 txq scheduling Rajkumar Manoharan
2018-12-19 13:24 ` Kalle Valo
2019-01-10 22:46 ` Rajkumar Manoharan
2018-12-19 1:02 ` [PATCH v5 6/6] ath10k: reporting estimated tx airtime for fairness Rajkumar Manoharan
2018-12-19 13:25 ` Kalle Valo
2018-12-19 13:12 ` [PATCH v5 0/6] Move TXQ scheduling and airtime fairness into mac80211 Toke Høiland-Jørgensen
2018-12-19 13:34 ` [Make-wifi-fast] " Dave Taht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1545181331-5288-1-git-send-email-rmanohar@codeaurora.org \
--to=rmanohar@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=make-wifi-fast@lists.bufferbloat.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).