From: Surabhi Vishnoi <svishnoi@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Surabhi Vishnoi <svishnoi@codeaurora.org>
Subject: [PATCH 1/4] ath10k: Fix the incorrect updation of NSS data in tx stats
Date: Fri, 22 Feb 2019 12:50:31 +0530 [thread overview]
Message-ID: <1550820034-18603-2-git-send-email-svishnoi@codeaurora.org> (raw)
In-Reply-To: <1550820034-18603-1-git-send-email-svishnoi@codeaurora.org>
The NSS data is updated incorrectly in the tx stats as the array
indexing starts from zero.
Fix the incorrect updation of NSS data in tx_stats by taking into
consideration the array index starting from zero.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support")
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index d5c666c..3a02a76 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2980,7 +2980,7 @@ static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
}
STATS_OP_FMT(AMPDU).bw[0][bw] +=
pstats->succ_bytes + pstats->retry_bytes;
- STATS_OP_FMT(AMPDU).nss[0][nss] +=
+ STATS_OP_FMT(AMPDU).nss[0][nss - 1] +=
pstats->succ_bytes + pstats->retry_bytes;
STATS_OP_FMT(AMPDU).gi[0][gi] +=
pstats->succ_bytes + pstats->retry_bytes;
@@ -2988,7 +2988,7 @@ static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
pstats->succ_bytes + pstats->retry_bytes;
STATS_OP_FMT(AMPDU).bw[1][bw] +=
pstats->succ_pkts + pstats->retry_pkts;
- STATS_OP_FMT(AMPDU).nss[1][nss] +=
+ STATS_OP_FMT(AMPDU).nss[1][nss - 1] +=
pstats->succ_pkts + pstats->retry_pkts;
STATS_OP_FMT(AMPDU).gi[1][gi] +=
pstats->succ_pkts + pstats->retry_pkts;
@@ -3000,27 +3000,27 @@ static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
}
STATS_OP_FMT(SUCC).bw[0][bw] += pstats->succ_bytes;
- STATS_OP_FMT(SUCC).nss[0][nss] += pstats->succ_bytes;
+ STATS_OP_FMT(SUCC).nss[0][nss - 1] += pstats->succ_bytes;
STATS_OP_FMT(SUCC).gi[0][gi] += pstats->succ_bytes;
STATS_OP_FMT(SUCC).bw[1][bw] += pstats->succ_pkts;
- STATS_OP_FMT(SUCC).nss[1][nss] += pstats->succ_pkts;
+ STATS_OP_FMT(SUCC).nss[1][nss - 1] += pstats->succ_pkts;
STATS_OP_FMT(SUCC).gi[1][gi] += pstats->succ_pkts;
STATS_OP_FMT(FAIL).bw[0][bw] += pstats->failed_bytes;
- STATS_OP_FMT(FAIL).nss[0][nss] += pstats->failed_bytes;
+ STATS_OP_FMT(FAIL).nss[0][nss - 1] += pstats->failed_bytes;
STATS_OP_FMT(FAIL).gi[0][gi] += pstats->failed_bytes;
STATS_OP_FMT(FAIL).bw[1][bw] += pstats->failed_pkts;
- STATS_OP_FMT(FAIL).nss[1][nss] += pstats->failed_pkts;
+ STATS_OP_FMT(FAIL).nss[1][nss - 1] += pstats->failed_pkts;
STATS_OP_FMT(FAIL).gi[1][gi] += pstats->failed_pkts;
STATS_OP_FMT(RETRY).bw[0][bw] += pstats->retry_bytes;
- STATS_OP_FMT(RETRY).nss[0][nss] += pstats->retry_bytes;
+ STATS_OP_FMT(RETRY).nss[0][nss - 1] += pstats->retry_bytes;
STATS_OP_FMT(RETRY).gi[0][gi] += pstats->retry_bytes;
STATS_OP_FMT(RETRY).bw[1][bw] += pstats->retry_pkts;
- STATS_OP_FMT(RETRY).nss[1][nss] += pstats->retry_pkts;
+ STATS_OP_FMT(RETRY).nss[1][nss - 1] += pstats->retry_pkts;
STATS_OP_FMT(RETRY).gi[1][gi] += pstats->retry_pkts;
if (txrate->flags >= RATE_INFO_FLAGS_MCS) {
--
1.9.1
next prev parent reply other threads:[~2019-02-22 7:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-22 7:20 [PATCH 0/4] Fix inconsistencies observed in population of tx_stats in debugfs Surabhi Vishnoi
2019-02-22 7:20 ` Surabhi Vishnoi [this message]
2019-02-22 7:20 ` [PATCH 2/4] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry Surabhi Vishnoi
2019-02-22 7:20 ` [PATCH 3/4] ath10k: Fix the wrong updation of SGI in tx_stats debugfs Surabhi Vishnoi
2019-02-24 21:13 ` kbuild test robot
2019-02-24 21:35 ` kbuild test robot
2019-02-22 7:20 ` [PATCH 4/4] ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_stats Surabhi Vishnoi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550820034-18603-2-git-send-email-svishnoi@codeaurora.org \
--to=svishnoi@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).