Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
From: Abhishek Ambure <aambure@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Abhishek Ambure <aambure@codeaurora.org>
Subject: [PATCH 0/2] correction in pktlog service connect and pktlog enable command
Date: Fri, 17 May 2019 15:35:14 +0530
Message-ID: <1558087516-666-1-git-send-email-aambure@codeaurora.org> (raw)

WCN3990 firmware supports htc pktlog service through which host driver
gets pktlog information. Pktlog service should be connected before htc
start command, hence pktlog connect is moved before htc start. 

WCN3990 firwmare expects pdev_id along with filter and reserved params to
enable pktlog htc service. So adding pdev_id in pktlog enable comamnd
params.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00963-QCAHLSWMTPL-1


Abhishek Ambure (2):
  ath10k: move pktlog connect service before htc start
  ath10k: correct wmi_tlv command params to enable pktlog for WCN3990

 drivers/net/wireless/ath/ath10k/htc.c     | 16 ++++++++--------
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  2 ++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  1 +
 3 files changed, 11 insertions(+), 8 deletions(-)

-- 
1.9.1


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-17 10:05 Abhishek Ambure [this message]
2019-05-17 10:05 ` [PATCH 1/2] ath10k: move pktlog connect service before htc start Abhishek Ambure
2019-05-17 10:05 ` [PATCH 2/2] ath10k: correct wmi_tlv command params to enable pktlog for WCN3990 Abhishek Ambure

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1558087516-666-1-git-send-email-aambure@codeaurora.org \
    --to=aambure@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox