Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
From: Abhishek Ambure <aambure@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Abhishek Ambure <aambure@codeaurora.org>
Subject: [PATCH 1/2] ath10k: move pktlog connect service before htc start
Date: Fri, 17 May 2019 15:35:15 +0530
Message-ID: <1558087516-666-2-git-send-email-aambure@codeaurora.org> (raw)
In-Reply-To: <1558087516-666-1-git-send-email-aambure@codeaurora.org>

WCN3990 supports HTC service for pktlog. PKTLOG service should be
connected before HTC start. Hence move connect pktlog service before
HTC start

Fixes: 713358c321f4 ("ath10k: enable pktlog for WCN3990 target")
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00963-QCAHLSWMTPL-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/htc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 805a7f8..e2980fe9 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -893,6 +893,14 @@ int ath10k_htc_start(struct ath10k_htc *htc)
 	int status = 0;
 	struct ath10k_htc_msg *msg;
 
+	if (ath10k_htc_pktlog_svc_supported(ar)) {
+		status = ath10k_htc_pktlog_connect(ar);
+		if (status) {
+			ath10k_err(ar, "failed to connect to pktlog: %d\n", status);
+			return status;
+		}
+	}
+
 	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
 	if (!skb)
 		return -ENOMEM;
@@ -919,14 +927,6 @@ int ath10k_htc_start(struct ath10k_htc *htc)
 		return status;
 	}
 
-	if (ath10k_htc_pktlog_svc_supported(ar)) {
-		status = ath10k_htc_pktlog_connect(ar);
-		if (status) {
-			ath10k_err(ar, "failed to connect to pktlog: %d\n", status);
-			return status;
-		}
-	}
-
 	return 0;
 }
 
-- 
1.9.1


  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-17 10:05 [PATCH 0/2] correction in pktlog service connect and pktlog enable command Abhishek Ambure
2019-05-17 10:05 ` Abhishek Ambure [this message]
2019-05-17 10:05 ` [PATCH 2/2] ath10k: correct wmi_tlv command params to enable pktlog for WCN3990 Abhishek Ambure

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1558087516-666-2-git-send-email-aambure@codeaurora.org \
    --to=aambure@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox