Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <kvalo@codeaurora.org>,
	<johannes@sipsolutions.net>, <Adham.Abozaeid@microchip.com>,
	<Venkateswara.Kaja@microchip.com>, <Nicolas.Ferre@microchip.com>,
	<Claudiu.Beznea@microchip.com>, <Ajay.Kathat@microchip.com>
Subject: [PATCH v2 13/16] wilc1000: add wilc_wlan.h
Date: Fri, 12 Jul 2019 01:59:24 +0000
Message-ID: <1562896697-8002-14-git-send-email-ajay.kathat@microchip.com> (raw)
In-Reply-To: <1562896697-8002-1-git-send-email-ajay.kathat@microchip.com>

From: Ajay Singh <ajay.kathat@microchip.com>

Moved '/driver/staging/wilc1000/wilc_wlan.h' to
'drivers/net/wireless/microchip/wilc1000/wilc_wlan.h'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 .../net/wireless/microchip/wilc1000/wilc_wlan.h    | 313 +++++++++++++++++++++
 1 file changed, 313 insertions(+)
 create mode 100644 drivers/net/wireless/microchip/wilc1000/wilc_wlan.h

diff --git a/drivers/net/wireless/microchip/wilc1000/wilc_wlan.h b/drivers/net/wireless/microchip/wilc1000/wilc_wlan.h
new file mode 100644
index 0000000..d2eef7b
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/wilc_wlan.h
@@ -0,0 +1,313 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_WLAN_H
+#define WILC_WLAN_H
+
+#include <linux/types.h>
+
+/********************************************
+ *
+ *      Mac eth header length
+ *
+ ********************************************/
+#define MAX_MAC_HDR_LEN			26 /* QOS_MAC_HDR_LEN */
+#define SUB_MSDU_HEADER_LENGTH		14
+#define SNAP_HDR_LEN			8
+#define ETHERNET_HDR_LEN		14
+#define WORD_ALIGNMENT_PAD		0
+
+#define ETH_ETHERNET_HDR_OFFSET		(MAX_MAC_HDR_LEN + \
+					 SUB_MSDU_HEADER_LENGTH + \
+					 SNAP_HDR_LEN - \
+					 ETHERNET_HDR_LEN + \
+					 WORD_ALIGNMENT_PAD)
+
+#define HOST_HDR_OFFSET			4
+#define ETHERNET_HDR_LEN		14
+#define IP_HDR_LEN			20
+#define IP_HDR_OFFSET			ETHERNET_HDR_LEN
+#define UDP_HDR_OFFSET			(IP_HDR_LEN + IP_HDR_OFFSET)
+#define UDP_HDR_LEN			8
+#define UDP_DATA_OFFSET			(UDP_HDR_OFFSET + UDP_HDR_LEN)
+#define ETH_CONFIG_PKT_HDR_LEN		UDP_DATA_OFFSET
+
+#define ETH_CONFIG_PKT_HDR_OFFSET	(ETH_ETHERNET_HDR_OFFSET + \
+					 ETH_CONFIG_PKT_HDR_LEN)
+
+/********************************************
+ *
+ *      Register Defines
+ *
+ ********************************************/
+#define WILC_PERIPH_REG_BASE		0x1000
+#define WILC_CHANGING_VIR_IF		0x108c
+#define WILC_CHIPID			WILC_PERIPH_REG_BASE
+#define WILC_GLB_RESET_0		(WILC_PERIPH_REG_BASE + 0x400)
+#define WILC_PIN_MUX_0			(WILC_PERIPH_REG_BASE + 0x408)
+#define WILC_HOST_TX_CTRL		(WILC_PERIPH_REG_BASE + 0x6c)
+#define WILC_HOST_RX_CTRL_0		(WILC_PERIPH_REG_BASE + 0x70)
+#define WILC_HOST_RX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x74)
+#define WILC_HOST_VMM_CTL		(WILC_PERIPH_REG_BASE + 0x78)
+#define WILC_HOST_RX_CTRL		(WILC_PERIPH_REG_BASE + 0x80)
+#define WILC_HOST_RX_EXTRA_SIZE		(WILC_PERIPH_REG_BASE + 0x84)
+#define WILC_HOST_TX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x88)
+#define WILC_MISC			(WILC_PERIPH_REG_BASE + 0x428)
+#define WILC_INTR_REG_BASE		(WILC_PERIPH_REG_BASE + 0xa00)
+#define WILC_INTR_ENABLE		WILC_INTR_REG_BASE
+#define WILC_INTR2_ENABLE		(WILC_INTR_REG_BASE + 4)
+
+#define WILC_INTR_POLARITY		(WILC_INTR_REG_BASE + 0x10)
+#define WILC_INTR_TYPE			(WILC_INTR_REG_BASE + 0x20)
+#define WILC_INTR_CLEAR			(WILC_INTR_REG_BASE + 0x30)
+#define WILC_INTR_STATUS		(WILC_INTR_REG_BASE + 0x40)
+
+#define WILC_VMM_TBL_SIZE		64
+#define WILC_VMM_TX_TBL_BASE		0x150400
+#define WILC_VMM_RX_TBL_BASE		0x150500
+
+#define WILC_VMM_BASE			0x150000
+#define WILC_VMM_CORE_CTL		WILC_VMM_BASE
+#define WILC_VMM_TBL_CTL		(WILC_VMM_BASE + 0x4)
+#define WILC_VMM_TBL_ENTRY		(WILC_VMM_BASE + 0x8)
+#define WILC_VMM_TBL0_SIZE		(WILC_VMM_BASE + 0xc)
+#define WILC_VMM_TO_HOST_SIZE		(WILC_VMM_BASE + 0x10)
+#define WILC_VMM_CORE_CFG		(WILC_VMM_BASE + 0x14)
+#define WILC_VMM_TBL_ACTIVE		(WILC_VMM_BASE + 040)
+#define WILC_VMM_TBL_STATUS		(WILC_VMM_BASE + 0x44)
+
+#define WILC_SPI_REG_BASE		0xe800
+#define WILC_SPI_CTL			WILC_SPI_REG_BASE
+#define WILC_SPI_MASTER_DMA_ADDR	(WILC_SPI_REG_BASE + 0x4)
+#define WILC_SPI_MASTER_DMA_COUNT	(WILC_SPI_REG_BASE + 0x8)
+#define WILC_SPI_SLAVE_DMA_ADDR		(WILC_SPI_REG_BASE + 0xc)
+#define WILC_SPI_SLAVE_DMA_COUNT	(WILC_SPI_REG_BASE + 0x10)
+#define WILC_SPI_TX_MODE		(WILC_SPI_REG_BASE + 0x20)
+#define WILC_SPI_PROTOCOL_CONFIG	(WILC_SPI_REG_BASE + 0x24)
+#define WILC_SPI_INTR_CTL		(WILC_SPI_REG_BASE + 0x2c)
+
+#define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
+					 WILC_SPI_REG_BASE)
+
+#define WILC_AHB_DATA_MEM_BASE		0x30000
+#define WILC_AHB_SHARE_MEM_BASE		0xd0000
+
+#define WILC_VMM_TBL_RX_SHADOW_BASE	WILC_AHB_SHARE_MEM_BASE
+#define WILC_VMM_TBL_RX_SHADOW_SIZE	256
+
+#define WILC_GP_REG_0			0x149c
+#define WILC_GP_REG_1			0x14a0
+
+#define WILC_HAVE_SDIO_IRQ_GPIO		BIT(0)
+#define WILC_HAVE_USE_PMU		BIT(1)
+#define WILC_HAVE_SLEEP_CLK_SRC_RTC	BIT(2)
+#define WILC_HAVE_SLEEP_CLK_SRC_XO	BIT(3)
+#define WILC_HAVE_EXT_PA_INV_TX_RX	BIT(4)
+#define WILC_HAVE_LEGACY_RF_SETTINGS	BIT(5)
+#define WILC_HAVE_XTAL_24		BIT(6)
+#define WILC_HAVE_DISABLE_WILC_UART	BIT(7)
+#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
+
+/********************************************
+ *
+ *      Wlan Defines
+ *
+ ********************************************/
+#define WILC_CFG_PKT		1
+#define WILC_NET_PKT		0
+#define WILC_MGMT_PKT		2
+
+#define WILC_CFG_SET		1
+#define WILC_CFG_QUERY		0
+
+#define WILC_CFG_RSP		1
+#define WILC_CFG_RSP_STATUS	2
+#define WILC_CFG_RSP_SCAN	3
+
+#define WILC_PLL_TO_SDIO	4
+#define WILC_PLL_TO_SPI		2
+#define ABORT_INT		BIT(31)
+
+#define WILC_RX_BUFF_SIZE	(96 * 1024)
+#define WILC_TX_BUFF_SIZE	(64 * 1024)
+
+#define MODALIAS		"WILC_SPI"
+#define GPIO_NUM		0x44
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*******************************************/
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Status word               */
+/* 15:0 = DMA count in words.              */
+/* 16: INT0 flag                           */
+/* 17: INT1 flag                           */
+/* 18: INT2 flag                           */
+/* 19: INT3 flag                           */
+/* 20: INT4 flag                           */
+/* 21: INT5 flag                           */
+/*******************************************/
+#define IRG_FLAGS_OFFSET	16
+#define IRQ_DMA_WD_CNT_MASK	((1ul << IRG_FLAGS_OFFSET) - 1)
+#define INT_0			BIT(IRG_FLAGS_OFFSET)
+#define INT_1			BIT(IRG_FLAGS_OFFSET + 1)
+#define INT_2			BIT(IRG_FLAGS_OFFSET + 2)
+#define INT_3			BIT(IRG_FLAGS_OFFSET + 3)
+#define INT_4			BIT(IRG_FLAGS_OFFSET + 4)
+#define INT_5			BIT(IRG_FLAGS_OFFSET + 5)
+#define MAX_NUM_INT		6
+
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Clear word                */
+/* 0: Clear INT0                           */
+/* 1: Clear INT1                           */
+/* 2: Clear INT2                           */
+/* 3: Clear INT3                           */
+/* 4: Clear INT4                           */
+/* 5: Clear INT5                           */
+/* 6: Select VMM table 1                   */
+/* 7: Select VMM table 2                   */
+/* 8: Enable VMM                           */
+/*******************************************/
+#define CLR_INT0		BIT(0)
+#define CLR_INT1		BIT(1)
+#define CLR_INT2		BIT(2)
+#define CLR_INT3		BIT(3)
+#define CLR_INT4		BIT(4)
+#define CLR_INT5		BIT(5)
+#define SEL_VMM_TBL0		BIT(6)
+#define SEL_VMM_TBL1		BIT(7)
+#define EN_VMM			BIT(8)
+
+#define DATA_INT_EXT		INT_0
+#define PLL_INT_EXT		INT_1
+#define SLEEP_INT_EXT		INT_2
+#define ALL_INT_EXT		(DATA_INT_EXT | PLL_INT_EXT | SLEEP_INT_EXT)
+#define NUM_INT_EXT		3
+
+#define DATA_INT_CLR		CLR_INT0
+#define PLL_INT_CLR		CLR_INT1
+#define SLEEP_INT_CLR		CLR_INT2
+
+#define ENABLE_RX_VMM		(SEL_VMM_TBL1 | EN_VMM)
+#define ENABLE_TX_VMM		(SEL_VMM_TBL0 | EN_VMM)
+/*time for expiring the completion of cfg packets*/
+#define WILC_CFG_PKTS_TIMEOUT	msecs_to_jiffies(2000)
+
+#define IS_MANAGMEMENT		0x100
+#define IS_MANAGMEMENT_CALLBACK	0x080
+#define IS_MGMT_STATUS_SUCCES	0x040
+
+/********************************************
+ *
+ *      Tx/Rx Queue Structure
+ *
+ ********************************************/
+
+struct txq_entry_t {
+	struct list_head list;
+	int type;
+	int ack_idx;
+	u8 *buffer;
+	int buffer_size;
+	void *priv;
+	int status;
+	struct wilc_vif *vif;
+	void (*tx_complete_func)(void *priv, int status);
+};
+
+struct rxq_entry_t {
+	struct list_head list;
+	u8 *buffer;
+	int buffer_size;
+};
+
+/********************************************
+ *
+ *      Host IF Structure
+ *
+ ********************************************/
+struct wilc;
+struct wilc_hif_func {
+	int (*hif_init)(struct wilc *wilc, bool resume);
+	int (*hif_deinit)(struct wilc *wilc);
+	int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
+	int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
+	int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
+	int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
+	int (*hif_read_size)(struct wilc *wilc, u32 *size);
+	int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_sync_ext)(struct wilc *wilc, int nint);
+	int (*enable_interrupt)(struct wilc *nic);
+	void (*disable_interrupt)(struct wilc *nic);
+};
+
+#define WILC_MAX_CFG_FRAME_SIZE		1468
+
+struct tx_complete_data {
+	int size;
+	void *buff;
+	struct sk_buff *skb;
+};
+
+struct wilc_cfg_cmd_hdr {
+	u8 cmd_type;
+	u8 seq_no;
+	__le16 total_len;
+	__le32 driver_handler;
+};
+
+struct wilc_cfg_frame {
+	struct wilc_cfg_cmd_hdr hdr;
+	u8 frame[WILC_MAX_CFG_FRAME_SIZE];
+};
+
+struct wilc_cfg_rsp {
+	u8 type;
+	u8 seq_no;
+};
+
+struct wilc;
+struct wilc_vif;
+
+int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
+				u32 buffer_size);
+int wilc_wlan_start(struct wilc *wilc);
+int wilc_wlan_stop(struct wilc *wilc);
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			      u32 buffer_size,
+			      void (*tx_complete_fn)(void *, int));
+int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
+void wilc_handle_isr(struct wilc *wilc);
+void wilc_wlan_cleanup(struct net_device *dev);
+int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
+		      u32 buffer_size, int commit, u32 drv_handler);
+int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
+		      u32 drv_handler);
+int wilc_wlan_cfg_get_val(struct wilc *wl, u16 wid, u8 *buffer,
+			  u32 buffer_size);
+int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			       u32 buffer_size, void (*func)(void *, int));
+void wilc_chip_sleep_manually(struct wilc *wilc);
+
+void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
+int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
+netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
+void host_wakeup_notify(struct wilc *wilc);
+void host_sleep_notify(struct wilc *wilc);
+void chip_allow_sleep(struct wilc *wilc);
+void chip_wakeup(struct wilc *wilc);
+int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
+			 u32 count);
+int wilc_wlan_init(struct net_device *dev);
+u32 wilc_get_chipid(struct wilc *wilc, bool update);
+#endif
-- 
2.7.4


  parent reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-12  1:58 [PATCH v2 00/16] wilc1000: move out of staging Ajay.Kathat
2019-07-12  1:58 ` [PATCH v2 01/16] wilc1000: add wilc_hif.h Ajay.Kathat
2019-10-23 10:03   ` Kalle Valo
     [not found]   ` <20191023100312.B1D2760A7E@smtp.codeaurora.org>
2019-10-29  3:06     ` Adham.Abozaeid
2019-07-12  1:58 ` [PATCH v2 02/16] wilc1000: add wilc_hif.c Ajay.Kathat
2019-07-12  7:42   ` Johannes Berg
2019-07-12 14:52     ` Ajay.Kathat
2019-07-12  1:58 ` [PATCH v2 03/16] wilc1000: add wilc_wlan_if.h Ajay.Kathat
2019-07-12  1:58 ` [PATCH v2 04/16] wilc1000: add wilc_wlan_cfg.h Ajay.Kathat
2019-07-12  1:58 ` [PATCH v2 05/16] wilc1000: add wilc_wlan_cfg.c Ajay.Kathat
2019-07-12  7:31   ` Johannes Berg
2019-07-12 10:58     ` Ajay.Kathat
2019-07-12  1:58 ` [PATCH v2 06/16] wilc1000: add wilc_wfi_netdevice.h Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 07/16] wilc1000: add wilc_wfi_cfgoperations.h Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 08/16] wilc1000: add wilc_wfi_cfgoperations.c Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 09/16] wilc1000: add wilc_netdev.c Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 10/16] wilc1000: add wilc_mon.c Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 11/16] wilc1000: add wilc_spi.c Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 12/16] wilc1000: add wilc_wlan.c Ajay.Kathat
2019-07-12  1:59 ` Ajay.Kathat [this message]
2019-07-12  1:59 ` [PATCH v2 14/16] wilc1000: add wilc_sdio.c Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 15/16] wilc1000: updated DT device binding for wilc1000 device Ajay.Kathat
2019-07-12  1:59 ` [PATCH v2 16/16] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1562896697-8002-14-git-send-email-ajay.kathat@microchip.com \
    --to=ajay.kathat@microchip.com \
    --cc=Adham.Abozaeid@microchip.com \
    --cc=Claudiu.Beznea@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=Venkateswara.Kaja@microchip.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johannes@sipsolutions.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git