From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C1732C3A589 for ; Sun, 18 Aug 2019 14:35:38 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 88E0720851 for ; Sun, 18 Aug 2019 14:35:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726743AbfHROfi (ORCPT ); Sun, 18 Aug 2019 10:35:38 -0400 Received: from alexa-out-ams-02.qualcomm.com ([185.23.61.163]:40859 "EHLO alexa-out-ams-02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726270AbfHROfh (ORCPT ); Sun, 18 Aug 2019 10:35:37 -0400 Received: from ironmsg03-ams.qualcomm.com ([10.251.56.4]) by alexa-out-ams-02.qualcomm.com with ESMTP; 18 Aug 2019 16:35:30 +0200 Received: from unknown (HELO wigig-1329.mea.qualcomm.com) ([10.4.89.235]) by ironmsg03-ams.qualcomm.com with ESMTP; 18 Aug 2019 16:35:28 +0200 From: Alexei Avshalom Lazar To: Johannes Berg Cc: Alexei Avshalom Lazar , linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com Subject: [PATCH v8 1/2] nl80211: Add support for EDMG channels Date: Sun, 18 Aug 2019 17:35:17 +0300 Message-Id: <1566138918-3823-2-git-send-email-ailizaro@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1566138918-3823-1-git-send-email-ailizaro@codeaurora.org> References: <1566138918-3823-1-git-send-email-ailizaro@codeaurora.org> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org 802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar --- drivers/net/wireless/ath/wil6210/cfg80211.c | 2 +- include/net/cfg80211.h | 86 ++++++++++++++- include/uapi/linux/nl80211.h | 24 +++++ net/mac80211/mlme.c | 2 +- net/mac80211/status.c | 2 +- net/wireless/chan.c | 159 ++++++++++++++++++++++++++++ net/wireless/nl80211.c | 37 +++++++ net/wireless/util.c | 42 +++++++- 8 files changed, 346 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 2fb4258..2414f57 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -351,7 +351,7 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid, BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) | BIT_ULL(NL80211_STA_INFO_TX_FAILED); - sinfo->txrate.flags = RATE_INFO_FLAGS_60G; + sinfo->txrate.flags = RATE_INFO_FLAGS_DMG; sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs); sinfo->rxrate.mcs = stats->last_mcs_rx; sinfo->rx_bytes = stats->rx_bytes; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 26e2ad2..616dfcd 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -318,6 +318,60 @@ struct ieee80211_sband_iftype_data { }; /** + * enum ieee80211_edmg_bw_config - allowed channel bandwidth configurations + * + * @IEEE80211_EDMG_BW_CONFIG_4: 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_5: 2.16GHz and 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_6: 2.16GHz, 4.32GHz and 6.48GHz + * @IEEE80211_EDMG_BW_CONFIG_7: 2.16GHz, 4.32GHz, 6.48GHz and 8.64GHz + * @IEEE80211_EDMG_BW_CONFIG_8: 2.16GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_9: 2.16GHz, 4.32GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_10: 2.16GHz, 4.32GHz, 6.48GHz and 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_11: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz and + * 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_12: 2.16GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_13: 2.16GHz, 4.32GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_14: 2.16GHz, 4.32GHz, 6.48GHz, 2.16GHz + 2.16GHz + * and 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_15: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz, + * 2.16GHz + 2.16GHz and 4.32GHz + 4.32GHz + */ +enum ieee80211_edmg_bw_config { + IEEE80211_EDMG_BW_CONFIG_4 = 4, + IEEE80211_EDMG_BW_CONFIG_5 = 5, + IEEE80211_EDMG_BW_CONFIG_6 = 6, + IEEE80211_EDMG_BW_CONFIG_7 = 7, + IEEE80211_EDMG_BW_CONFIG_8 = 8, + IEEE80211_EDMG_BW_CONFIG_9 = 9, + IEEE80211_EDMG_BW_CONFIG_10 = 10, + IEEE80211_EDMG_BW_CONFIG_11 = 11, + IEEE80211_EDMG_BW_CONFIG_12 = 12, + IEEE80211_EDMG_BW_CONFIG_13 = 13, + IEEE80211_EDMG_BW_CONFIG_14 = 14, + IEEE80211_EDMG_BW_CONFIG_15 = 15, +}; + +/** + * struct ieee80211_edmg - EDMG configuration + * + * This structure describes most essential parameters needed + * to describe 802.11ay EDMG configuration + * + * @channels: bitmap that indicates the 2.16 GHz channel(s) + * that are allowed to be used for transmissions. + * Bit 0 indicates channel 1, bit 1 indicates channel 2, etc. + * Set to 0 indicate EDMG not supported. + * @bw_config: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations + */ +struct ieee80211_edmg { + u8 channels; + enum ieee80211_edmg_bw_config bw_config; +}; + +/** * struct ieee80211_supported_band - frequency band definition * * This structure describes a frequency band a wiphy @@ -333,6 +387,7 @@ struct ieee80211_sband_iftype_data { * @n_bitrates: Number of bitrates in @bitrates * @ht_cap: HT capabilities in this band * @vht_cap: VHT capabilities in this band + * @edmg_cap: EDMG capabilities in this band * @n_iftype_data: number of iftype data entries * @iftype_data: interface type data entries. Note that the bits in * @types_mask inside this structure cannot overlap (i.e. only @@ -347,6 +402,7 @@ struct ieee80211_supported_band { int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_edmg edmg_cap; u16 n_iftype_data; const struct ieee80211_sband_iftype_data *iftype_data; }; @@ -514,12 +570,17 @@ struct key_params { * @center_freq1: center frequency of first segment * @center_freq2: center frequency of second segment * (only with 80+80 MHz) + * @edmg: define the EDMG channels configuration. + * If edmg is requested (i.e. the .channels member is non-zero), + * chan will define the primary channel and all other + * parameters are ignored. */ struct cfg80211_chan_def { struct ieee80211_channel *chan; enum nl80211_chan_width width; u32 center_freq1; u32 center_freq2; + struct ieee80211_edmg edmg; }; /** @@ -578,6 +639,19 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, } /** + * cfg80211_chandef_is_edmg - check if chandef represents an EDMG channel + * + * @chandef: the channel definition + * + * Return: %true if EDMG defined, %false otherwise. + */ +static inline bool +cfg80211_chandef_is_edmg(const struct cfg80211_chan_def *chandef) +{ + return chandef->edmg.channels || chandef->edmg.bw_config; +} + +/** * cfg80211_chandef_compatible - check if two channel definitions are compatible * @chandef1: first channel definition * @chandef2: second channel definition @@ -1162,15 +1236,17 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval - * @RATE_INFO_FLAGS_60G: 60GHz MCS + * @RATE_INFO_FLAGS_DMG: 60GHz MCS * @RATE_INFO_FLAGS_HE_MCS: HE MCS information + * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), RATE_INFO_FLAGS_SHORT_GI = BIT(2), - RATE_INFO_FLAGS_60G = BIT(3), + RATE_INFO_FLAGS_DMG = BIT(3), RATE_INFO_FLAGS_HE_MCS = BIT(4), + RATE_INFO_FLAGS_EDMG = BIT(5), }; /** @@ -1210,6 +1286,7 @@ enum rate_info_bw { * @he_dcm: HE DCM value * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc, * only valid if bw is %RATE_INFO_BW_HE_RU) + * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4) */ struct rate_info { u8 flags; @@ -1220,6 +1297,7 @@ struct rate_info { u8 he_gi; u8 he_dcm; u8 he_ru_alloc; + u8 n_bonded_ch; }; /** @@ -2421,6 +2499,9 @@ struct cfg80211_bss_selection { * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets. * @want_1x: indicates user-space supports and wants to use 802.1X driver * offload of 4-way handshake. + * @edmg: define the EDMG channels. + * This may specify multiple channels and bonding options for the driver + * to choose from, based on BSS configuration. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -2454,6 +2535,7 @@ struct cfg80211_connect_params { const u8 *fils_erp_rrk; size_t fils_erp_rrk_len; bool want_1x; + struct ieee80211_edmg edmg; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c45587c..cfe8dfe 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -52,6 +52,11 @@ #define NL80211_MULTICAST_GROUP_NAN "nan" #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" +#define NL80211_EDMG_BW_CONFIG_MIN 4 +#define NL80211_EDMG_BW_CONFIG_MAX 15 +#define NL80211_EDMG_CHANNELS_MIN 1 +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ + /** * DOC: Station handling * @@ -2358,6 +2363,13 @@ enum nl80211_commands { * * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. * + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2815,6 +2827,9 @@ enum nl80211_attrs { NL80211_ATTR_TWT_RESPONDER, + NL80211_ATTR_WIPHY_EDMG_CHANNELS, + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3423,6 +3438,12 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3440,6 +3461,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_VHT_CAPA, NL80211_BAND_ATTR_IFTYPE_DATA, + NL80211_BAND_ATTR_EDMG_CHANNELS, + NL80211_BAND_ATTR_EDMG_BW_CONFIG, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a99ad032..54e847a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -158,10 +158,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); + memset(chandef, 0, sizeof(struct cfg80211_chan_def)); chandef->chan = channel; chandef->width = NL80211_CHAN_WIDTH_20_NOHT; chandef->center_freq1 = channel->center_freq; - chandef->center_freq2 = 0; if (!ht_oper || !sta_ht_cap.ht_supported) { ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; diff --git a/net/mac80211/status.c b/net/mac80211/status.c index f03aa89..87099e1 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -323,7 +323,7 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_local *local, if (status && status->rate && !(status->rate->flags & (RATE_INFO_FLAGS_MCS | - RATE_INFO_FLAGS_60G | + RATE_INFO_FLAGS_DMG | RATE_INFO_FLAGS_VHT_MCS | RATE_INFO_FLAGS_HE_MCS))) legacy_rate = status->rate->legacy; diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 7dc1bbd..d823e5f 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -14,6 +14,11 @@ #include "core.h" #include "rdev-ops.h" +static bool cfg80211_valid_60g_freq(u32 freq) +{ + return freq >= 58320 && freq <= 70200; +} + void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, struct ieee80211_channel *chan, enum nl80211_channel_type chan_type) @@ -23,6 +28,8 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, chandef->chan = chan; chandef->center_freq2 = 0; + chandef->edmg.bw_config = 0; + chandef->edmg.channels = 0; switch (chan_type) { case NL80211_CHAN_NO_HT: @@ -47,6 +54,91 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, } EXPORT_SYMBOL(cfg80211_chandef_create); +static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef) +{ + int max_contiguous = 0; + int num_of_enabled = 0; + int contiguous = 0; + int i; + + if (!chandef->edmg.channels || !chandef->edmg.bw_config) + return false; + + if (!cfg80211_valid_60g_freq(chandef->chan->center_freq)) + return false; + + for (i = 0; i < 6; i++) { + if (chandef->edmg.channels & BIT(i)) { + contiguous++; + num_of_enabled++; + } else { + contiguous = 0; + } + + max_contiguous = max(contiguous, max_contiguous); + } + /* basic verification of edmg configuration according to + * IEEE P802.11ay/D4.0 section 9.4.2.251 + */ + /* check bw_config against contiguous edmg channels */ + switch (chandef->edmg.bw_config) { + case IEEE80211_EDMG_BW_CONFIG_4: + case IEEE80211_EDMG_BW_CONFIG_8: + case IEEE80211_EDMG_BW_CONFIG_12: + if (max_contiguous < 1) + return false; + break; + case IEEE80211_EDMG_BW_CONFIG_5: + case IEEE80211_EDMG_BW_CONFIG_9: + case IEEE80211_EDMG_BW_CONFIG_13: + if (max_contiguous < 2) + return false; + break; + case IEEE80211_EDMG_BW_CONFIG_6: + case IEEE80211_EDMG_BW_CONFIG_10: + case IEEE80211_EDMG_BW_CONFIG_14: + if (max_contiguous < 3) + return false; + break; + case IEEE80211_EDMG_BW_CONFIG_7: + case IEEE80211_EDMG_BW_CONFIG_11: + case IEEE80211_EDMG_BW_CONFIG_15: + if (max_contiguous < 4) + return false; + break; + + default: + return false; + } + + /* check bw_config against aggregated (non contiguous) edmg channels */ + switch (chandef->edmg.bw_config) { + case IEEE80211_EDMG_BW_CONFIG_4: + case IEEE80211_EDMG_BW_CONFIG_5: + case IEEE80211_EDMG_BW_CONFIG_6: + case IEEE80211_EDMG_BW_CONFIG_7: + break; + case IEEE80211_EDMG_BW_CONFIG_8: + case IEEE80211_EDMG_BW_CONFIG_9: + case IEEE80211_EDMG_BW_CONFIG_10: + case IEEE80211_EDMG_BW_CONFIG_11: + if (num_of_enabled < 2) + return false; + break; + case IEEE80211_EDMG_BW_CONFIG_12: + case IEEE80211_EDMG_BW_CONFIG_13: + case IEEE80211_EDMG_BW_CONFIG_14: + case IEEE80211_EDMG_BW_CONFIG_15: + if (num_of_enabled < 4 || max_contiguous < 2) + return false; + break; + default: + return false; + } + + return true; +} + bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) { u32 control_freq; @@ -112,6 +204,10 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) return false; } + if (cfg80211_chandef_is_edmg(chandef) && + !cfg80211_edmg_chandef_valid(chandef)) + return false; + return true; } EXPORT_SYMBOL(cfg80211_chandef_valid); @@ -721,12 +817,66 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, return true; } +/* check if the operating channels are valid and supported */ +static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels, + enum ieee80211_edmg_bw_config edmg_bw_config, + int primary_channel, + struct ieee80211_edmg *edmg_cap) +{ + struct ieee80211_channel *chan; + int i, freq; + int channels_counter = 0; + + if (!edmg_channels && !edmg_bw_config) + return true; + + if ((!edmg_channels && edmg_bw_config) || + (edmg_channels && !edmg_bw_config)) + return false; + + if (!(edmg_channels & BIT(primary_channel - 1))) + return false; + + /* 60GHz channels 1..6 */ + for (i = 0; i < 6; i++) { + if (!(edmg_channels & BIT(i))) + continue; + + if (!(edmg_cap->channels & BIT(i))) + return false; + + channels_counter++; + + freq = ieee80211_channel_to_frequency(i + 1, + NL80211_BAND_60GHZ); + chan = ieee80211_get_channel(wiphy, freq); + if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) + return false; + } + + /* IEEE802.11 allows max 4 channels */ + if (channels_counter > 4) + return false; + + /* check bw_config is a subset of what driver supports + * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13) + */ + if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4)) + return false; + + if (edmg_bw_config > edmg_cap->bw_config) + return false; + + return true; +} + bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, u32 prohibited_flags) { struct ieee80211_sta_ht_cap *ht_cap; struct ieee80211_sta_vht_cap *vht_cap; + struct ieee80211_edmg *edmg_cap; u32 width, control_freq, cap; if (WARN_ON(!cfg80211_chandef_valid(chandef))) @@ -734,6 +884,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap; vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap; + edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap; + + if (edmg_cap->channels && + !cfg80211_edmg_usable(wiphy, + chandef->edmg.channels, + chandef->edmg.bw_config, + chandef->chan->hw_value, + edmg_cap)) + return false; control_freq = chandef->chan->center_freq; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 65f85fd..11888fa 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -289,6 +289,13 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 }, [NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 }, + [NL80211_ATTR_WIPHY_EDMG_CHANNELS] = NLA_POLICY_RANGE(NLA_U8, + NL80211_EDMG_CHANNELS_MIN, + NL80211_EDMG_CHANNELS_MAX), + [NL80211_ATTR_WIPHY_EDMG_BW_CONFIG] = NLA_POLICY_RANGE(NLA_U8, + NL80211_EDMG_BW_CONFIG_MIN, + NL80211_EDMG_BW_CONFIG_MAX), + [NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 }, [NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 }, [NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 }, @@ -1555,6 +1562,15 @@ static int nl80211_send_band_rateinfo(struct sk_buff *msg, nla_nest_end(msg, nl_iftype_data); } + /* add EDMG info */ + if (sband->edmg_cap.channels && + (nla_put_u8(msg, NL80211_BAND_ATTR_EDMG_CHANNELS, + sband->edmg_cap.channels) || + nla_put_u8(msg, NL80211_BAND_ATTR_EDMG_BW_CONFIG, + sband->edmg_cap.bw_config))) + + return -ENOBUFS; + /* add bitrates */ nl_rates = nla_nest_start_noflag(msg, NL80211_BAND_ATTR_RATES); if (!nl_rates) @@ -2646,6 +2662,18 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev, nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ2]); } + if (info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]) { + chandef->edmg.channels = + nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]); + + if (info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]) + chandef->edmg.bw_config = + nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]); + } else { + chandef->edmg.bw_config = 0; + chandef->edmg.channels = 0; + } + if (!cfg80211_chandef_valid(chandef)) { NL_SET_ERR_MSG(extack, "invalid channel definition"); return -EINVAL; @@ -9814,6 +9842,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } + if (info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]) { + connect.edmg.channels = + nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]); + + if (info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]) + connect.edmg.bw_config = + nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]); + } + if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) { connkeys = nl80211_parse_connkeys(rdev, info, NULL); if (IS_ERR(connkeys)) diff --git a/net/wireless/util.c b/net/wireless/util.c index d0e35b7..01b52ef 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1034,7 +1034,7 @@ static u32 cfg80211_calculate_bitrate_ht(struct rate_info *rate) return (bitrate + 50000) / 100000; } -static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate) +static u32 cfg80211_calculate_bitrate_dmg(struct rate_info *rate) { static const u32 __mcs2bitrate[] = { /* control PHY */ @@ -1081,6 +1081,40 @@ static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate) return __mcs2bitrate[rate->mcs]; } +static u32 cfg80211_calculate_bitrate_edmg(struct rate_info *rate) +{ + static const u32 __mcs2bitrate[] = { + /* control PHY */ + [0] = 275, + /* SC PHY */ + [1] = 3850, + [2] = 7700, + [3] = 9625, + [4] = 11550, + [5] = 12512, /* 1251.25 mbps */ + [6] = 13475, + [7] = 15400, + [8] = 19250, + [9] = 23100, + [10] = 25025, + [11] = 26950, + [12] = 30800, + [13] = 38500, + [14] = 46200, + [15] = 50050, + [16] = 53900, + [17] = 57750, + [18] = 69300, + [19] = 75075, + [20] = 80850, + }; + + if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate))) + return 0; + + return __mcs2bitrate[rate->mcs] * rate->n_bonded_ch; +} + static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) { static const u32 base[4][10] = { @@ -1253,8 +1287,10 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate) { if (rate->flags & RATE_INFO_FLAGS_MCS) return cfg80211_calculate_bitrate_ht(rate); - if (rate->flags & RATE_INFO_FLAGS_60G) - return cfg80211_calculate_bitrate_60g(rate); + if (rate->flags & RATE_INFO_FLAGS_DMG) + return cfg80211_calculate_bitrate_dmg(rate); + if (rate->flags & RATE_INFO_FLAGS_EDMG) + return cfg80211_calculate_bitrate_edmg(rate); if (rate->flags & RATE_INFO_FLAGS_VHT_MCS) return cfg80211_calculate_bitrate_vht(rate); if (rate->flags & RATE_INFO_FLAGS_HE_MCS) -- 2.7.4