linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 1/7] ath10k: enable RX bundle receive for sdio
Date: Tue, 20 Aug 2019 19:55:02 +0800	[thread overview]
Message-ID: <1566302108-18219-2-git-send-email-wgong@codeaurora.org> (raw)
In-Reply-To: <1566302108-18219-1-git-send-email-wgong@codeaurora.org>

From: Alagu Sankar <alagusankar@silex-india.com>

The existing implementation of initiating multiple sdio transfers for
receive bundling is slowing down the receive speed. Combining the
transfers using a bundle method would be ideal.

The transmission utilization ratio for sdio bus for small packet is
slow, because the space and time cost for sdio bus is same for large
length packet and small length packet. So the speed of data for large
length packet is higher than small length.

Test result of different length of data:
data packet(byte)   cost time(us)   calculated rate(Mbps)
      256               28                73
      512               33               124
     1024               35               234
     1792               45               318
    14336              168               682
    28672              333               688
    57344              660               695

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 101 ++++++++++++++++++++++++---------
 drivers/net/wireless/ath/ath10k/sdio.h |   7 ++-
 2 files changed, 79 insertions(+), 29 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 8ed4fbd..d9395f0 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -24,6 +24,9 @@
 #include "trace.h"
 #include "sdio.h"
 
+#define ATH10K_SDIO_DMA_BUF_SIZE	(32 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE	(32 * 1024)
+
 /* inlined helper functions */
 
 static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
@@ -489,11 +492,11 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar,
-					     struct ath10k_sdio_rx_data *rx_pkts,
-					     struct ath10k_htc_hdr *htc_hdr,
-					     size_t full_len, size_t act_len,
-					     size_t *bndl_cnt)
+static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
+					 struct ath10k_sdio_rx_data *rx_pkts,
+					 struct ath10k_htc_hdr *htc_hdr,
+					 size_t full_len, size_t act_len,
+					 size_t *bndl_cnt)
 {
 	int ret, i;
 
@@ -534,6 +537,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	size_t full_len, act_len;
 	bool last_in_bundle;
 	int ret, i;
+	int pkt_cnt = 0;
 
 	if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
 		ath10k_warn(ar,
@@ -577,20 +581,22 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			 */
 			size_t bndl_cnt;
 
-			ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
-								&ar_sdio->rx_pkts[i],
-								htc_hdr,
-								full_len,
-								act_len,
-								&bndl_cnt);
+			struct ath10k_sdio_rx_data *rx_pkts =
+				&ar_sdio->rx_pkts[pkt_cnt];
+
+			ret = ath10k_sdio_mbox_alloc_bundle(ar,
+							    rx_pkts,
+							    htc_hdr,
+							    full_len,
+							    act_len,
+							    &bndl_cnt);
 
 			if (ret) {
 				ath10k_warn(ar, "alloc_bundle error %d\n", ret);
 				goto err;
 			}
 
-			n_lookaheads += bndl_cnt;
-			i += bndl_cnt;
+			pkt_cnt += bndl_cnt;
 			/*Next buffer will be the last in the bundle */
 			last_in_bundle = true;
 		}
@@ -602,7 +608,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 		if (htc_hdr->flags & ATH10K_HTC_FLAGS_RECV_1MORE_BLOCK)
 			full_len += ATH10K_HIF_MBOX_BLOCK_SIZE;
 
-		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i],
+		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[pkt_cnt],
 						    act_len,
 						    full_len,
 						    last_in_bundle,
@@ -611,9 +617,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
 			goto err;
 		}
+		pkt_cnt++;
 	}
 
-	ar_sdio->n_rx_pkts = i;
+	ar_sdio->n_rx_pkts = pkt_cnt;
 
 	return 0;
 
@@ -627,41 +634,72 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
-				      struct ath10k_sdio_rx_data *pkt)
+static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
-	struct sk_buff *skb = pkt->skb;
+	struct ath10k_sdio_rx_data *pkt = &ar_sdio->rx_pkts[0];
+	struct sk_buff *skb;
 	int ret;
 
+	skb = pkt->skb;
 	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
 				 skb->data, pkt->alloc_len);
-	pkt->status = ret;
-	if (!ret)
+
+	if (ret) {
+		ar_sdio->n_rx_pkts = 0;
+		ath10k_sdio_mbox_free_rx_pkt(pkt);
+	} else {
+		pkt->status = ret;
 		skb_put(skb, pkt->act_len);
+	}
 
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
+static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt;
 	int ret, i;
+	u32 pkt_offset, virt_pkt_len;
 
+	virt_pkt_len = 0;
 	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
-		ret = ath10k_sdio_mbox_rx_packet(ar,
-						 &ar_sdio->rx_pkts[i]);
-		if (ret)
+		virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
+	}
+
+	if (virt_pkt_len < ATH10K_SDIO_DMA_BUF_SIZE) {
+		ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
+					 ar_sdio->vsg_buffer, virt_pkt_len);
+		if (ret) {
+			i = 0;
 			goto err;
+		}
+	} else {
+		ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
+	}
+
+	pkt_offset = 0;
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
+		struct sk_buff *skb = ar_sdio->rx_pkts[i].skb;
+
+		pkt = &ar_sdio->rx_pkts[i];
+		memcpy(skb->data, ar_sdio->vsg_buffer + pkt_offset,
+		       pkt->alloc_len);
+		pkt->status = 0;
+		skb_put(skb, pkt->act_len);
+		pkt_offset += pkt->alloc_len;
 	}
 
 	return 0;
 
 err:
 	/* Free all packets that was not successfully fetched. */
-	for (; i < ar_sdio->n_rx_pkts; i++)
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++)
 		ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
 
+	ar_sdio->n_rx_pkts = 0;
+
 	return ret;
 }
 
@@ -704,7 +742,10 @@ static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
 			 */
 			*done = false;
 
-		ret = ath10k_sdio_mbox_rx_fetch(ar);
+		if (ar_sdio->n_rx_pkts > 1)
+			ret = ath10k_sdio_mbox_rx_fetch_bundle(ar);
+		else
+			ret = ath10k_sdio_mbox_rx_fetch(ar);
 
 		/* Process fetched packets. This will potentially update
 		 * n_lookaheads depending on if the packets contain lookahead
@@ -1112,7 +1153,7 @@ static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
 					 MBOX_HOST_INT_STATUS_ADDRESS,
 					 &rx_word);
 		if (ret) {
-			ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
+			ath10k_warn(ar, "unable to read rx_lookahd: %d\n", ret);
 			return ret;
 		}
 
@@ -2007,6 +2048,12 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 		goto err_core_destroy;
 	}
 
+	ar_sdio->vsg_buffer = devm_kmalloc(ar->dev, ATH10K_SDIO_VSG_BUF_SIZE, GFP_KERNEL);
+	if (!ar_sdio->vsg_buffer) {
+		ret = -ENOMEM;
+		goto err_core_destroy;
+	}
+
 	ar_sdio->irq_data.irq_en_reg =
 		devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_enable_regs),
 			     GFP_KERNEL);
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index b8c7ac0..4896eca 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -138,8 +138,8 @@ struct ath10k_sdio_irq_proc_regs {
 	u8 rx_lookahead_valid;
 	u8 host_int_status2;
 	u8 gmbox_rx_avail;
-	__le32 rx_lookahead[2];
-	__le32 rx_gmbox_lookahead_alias[2];
+	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
+	__le32 int_status_enable;
 };
 
 struct ath10k_sdio_irq_enable_regs {
@@ -196,6 +196,9 @@ struct ath10k_sdio {
 	struct ath10k *ar;
 	struct ath10k_sdio_irq_data irq_data;
 
+	/* temporary buffer for sdio read */
+	u8 *vsg_buffer;
+
 	/* temporary buffer for BMI requests */
 	u8 *bmi_buf;
 
-- 
1.9.1


  reply	other threads:[~2019-08-20 11:55 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20 11:55 [PATCH 0/7] ath10k: improve throughout of tcp/udp TX/RX of sdio Wen Gong
2019-08-20 11:55 ` Wen Gong [this message]
2019-08-27  7:40   ` [PATCH 1/7] ath10k: enable RX bundle receive for sdio Nicolas Boichat
2019-08-27  8:02     ` Wen Gong
2019-08-27  8:08       ` Nicolas Boichat
2019-08-28  4:25         ` Wen Gong
2019-08-20 11:55 ` [PATCH 2/7] ath10k: change max RX bundle size from 8 to 32 " Wen Gong
2019-08-20 12:23   ` Toke Høiland-Jørgensen
2019-08-21  6:01     ` Wen Gong
2019-08-21 10:02       ` Toke Høiland-Jørgensen
2019-08-27  7:42   ` Nicolas Boichat
2019-08-28  2:31     ` Wen Gong
2019-09-03 16:09   ` Dave Taht
2019-09-04  4:43     ` Wen Gong
2019-09-04 13:34       ` Dave Taht
2019-09-05 10:12         ` Wen Gong
2019-08-20 11:55 ` [PATCH 3/7] ath10k: add workqueue for RX path of sdio Wen Gong
2019-09-04  2:31   ` Wen Gong
2019-08-20 11:55 ` [PATCH 4/7] ath10k: disable TX complete indication of htt for sdio Wen Gong
2019-08-20 12:23   ` Toke Høiland-Jørgensen
2019-08-21  6:20     ` Wen Gong
2019-08-21 10:10       ` Toke Høiland-Jørgensen
2019-08-21 10:20         ` Wen Gong
2019-08-22 12:12           ` Toke Høiland-Jørgensen
2019-08-23  2:46             ` Wen Gong
2019-08-23  8:39               ` Toke Høiland-Jørgensen
2019-08-27  7:56   ` Nicolas Boichat
2019-08-28  4:24     ` Wen Gong
2019-09-04  2:33   ` Wen Gong
2019-08-20 11:55 ` [PATCH 5/7] ath10k: add htt TX bundle " Wen Gong
2019-09-04  2:34   ` Wen Gong
2019-08-20 11:55 ` [PATCH 6/7] ath10k: enable alt data of TX path " Wen Gong
2019-09-04  2:36   ` Wen Gong
2019-08-20 11:55 ` [PATCH 7/7] ath10k: enable napi on RX " Wen Gong
2019-09-04  2:37   ` Wen Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566302108-18219-2-git-send-email-wgong@codeaurora.org \
    --to=wgong@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).