linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ath10k: add reorder and change PN check logic for mac80211
@ 2019-08-21  6:23 Wen Gong
  2019-09-10 13:21 ` Kalle Valo
  0 siblings, 1 reply; 2+ messages in thread
From: Wen Gong @ 2019-08-21  6:23 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

For sdio chip, if the rssi is not good, then it have some retry,
firmware will indicate the msdu list of a ppdu with a hole, it
means it lost the hole msdu, after the msdu retry from AP, the
hole msdu will indicate from firmware later. The hole msdu's PN
check will fail and the hole msdu will be dropped.

PN check fail example:
Sequence number PN number  PN check status
     3814         6101         success
     3815         6102         success
     3816         6103         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
     3817         6104         fail

The correct logic is reorder the msdu list and then do PN check.
ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic
and then do PN check in ieee80211_rx_h_decrypt of mac80211.

example after reorder:
Sequence number PN number  PN check status
     3814         6101         success
     3815         6102         success
     3816         6103         success
     3817         6104         success
     3818         6105         success
     3819         6106         success
     3820         6107         success

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 91 +++++++++++++++++++++++++++++++-
 1 file changed, 89 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 83a7fb6..53f1095 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2151,6 +2151,10 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	struct ath10k_peer *peer;
 	struct htt_rx_indication_mpdu_range *mpdu_ranges;
 	struct fw_rx_desc_hl *fw_desc;
+	enum htt_txrx_sec_cast_type sec_index;
+	enum htt_security_types sec_type;
+	union htt_rx_pn_t new_pn = {0};
+	struct htt_hl_rx_desc *rx_desc;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_rx_status *rx_status;
 	u16 peer_id;
@@ -2158,9 +2162,11 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	int num_mpdu_ranges;
 	size_t tot_hdr_len;
 	struct ieee80211_channel *ch;
-	bool pn_invalid;
+	bool pn_invalid, qos, first_msdu;
+	u32 tid, rx_desc_info;
 
 	peer_id = __le16_to_cpu(rx->hdr.peer_id);
+	tid = MS(rx->hdr.info0, HTT_RX_INDICATION_INFO0_EXT_TID);
 
 	spin_lock_bh(&ar->data_lock);
 	peer = ath10k_peer_find_by_id(ar, peer_id);
@@ -2168,6 +2174,9 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	if (!peer && peer_id != HTT_INVALID_PEERID)
 		ath10k_warn(ar, "Got RX ind from invalid peer: %u\n", peer_id);
 
+	if (!peer)
+		return true;
+
 	num_mpdu_ranges = MS(__le32_to_cpu(rx->hdr.info1),
 			     HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES);
 	mpdu_ranges = htt_rx_ind_get_mpdu_ranges_hl(rx);
@@ -2192,10 +2201,24 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 		goto err;
 	}
 
-	if (check_pn_type == HTT_RX_PN_CHECK) {
+	rx_desc = (struct htt_hl_rx_desc *)&rx->mpdu_ranges[num_mpdu_ranges];
+	rx_desc_info = __le32_to_cpu(rx_desc->info);
+
+	if (MS(rx_desc_info, HTT_RX_DESC_HL_INFO_MCAST_BCAST))
+		sec_index = HTT_TXRX_SEC_MCAST;
+	else
+		sec_index = HTT_TXRX_SEC_UCAST;
+
+	sec_type = peer->rx_pn[sec_index].sec_type;
+	first_msdu = rx->fw_desc.flags & FW_RX_DESC_FLAGS_FIRST_MSDU;
+
+	ath10k_htt_rx_mpdu_desc_pn_hl(rx_desc, &new_pn, peer->rx_pn[sec_index].pn_len);
+
+	if (check_pn_type == HTT_RX_PN_CHECK && tid >= IEEE80211_NUM_TIDS) {
 		spin_lock_bh(&ar->data_lock);
 		pn_invalid = ath10k_htt_rx_pn_check_replay_hl(ar, peer, rx);
 		spin_unlock_bh(&ar->data_lock);
+
 		if (pn_invalid)
 			goto err;
 	}
@@ -2211,6 +2234,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	skb_pull(skb, tot_hdr_len);
 
 	hdr = (struct ieee80211_hdr *)skb->data;
+	qos = ieee80211_is_data_qos(hdr->frame_control);
 	rx_status = IEEE80211_SKB_RXCB(skb);
 	rx_status->chains |= BIT(0);
 	if (rx->ppdu.combined_rssi == 0) {
@@ -2254,6 +2278,55 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 		rx_status->flag |= RX_FLAG_DECRYPTED |
 				   RX_FLAG_IV_STRIPPED |
 				   RX_FLAG_MMIC_STRIPPED;
+
+		if (tid < IEEE80211_NUM_TIDS &&
+		    first_msdu &&
+		    check_pn_type == HTT_RX_PN_CHECK &&
+		   (sec_type == HTT_SECURITY_AES_CCMP ||
+		    sec_type == HTT_SECURITY_TKIP ||
+		    sec_type == HTT_SECURITY_TKIP_NOMIC)) {
+			u8 offset, *ivp, i;
+			s8 keyidx = 0;
+			__le64 pn48 = cpu_to_le64(new_pn.pn48);
+
+			hdr = (struct ieee80211_hdr *)skb->data;
+			offset = ieee80211_hdrlen(hdr->frame_control);
+			hdr->frame_control |= __cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+			rx_status->flag &= ~RX_FLAG_IV_STRIPPED;
+
+			memmove(skb->data - IEEE80211_CCMP_HDR_LEN,
+				skb->data, offset);
+			skb_push(skb, IEEE80211_CCMP_HDR_LEN);
+			ivp = skb->data + offset;
+			memset(skb->data + offset, 0, IEEE80211_CCMP_HDR_LEN);
+			/* Ext IV */
+			ivp[IEEE80211_WEP_IV_LEN - 1] |= ATH10K_IEEE80211_EXTIV;
+
+			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+				if (peer->keys[i] &&
+				    peer->keys[i]->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+					keyidx = peer->keys[i]->keyidx;
+			}
+
+			/* Key ID */
+			ivp[IEEE80211_WEP_IV_LEN - 1] |= keyidx << 6;
+
+			if (sec_type == HTT_SECURITY_AES_CCMP) {
+				rx_status->flag |= RX_FLAG_MIC_STRIPPED;
+				/* pn 0, pn 1 */
+				memcpy(skb->data + offset, &pn48, 2);
+				/* pn 1, pn 3 , pn 34 , pn 5 */
+				memcpy(skb->data + offset + 4, ((u8 *)&pn48) + 2, 4);
+			} else {
+				rx_status->flag |= RX_FLAG_ICV_STRIPPED;
+				/* TSC 0 */
+				memcpy(skb->data + offset + 2, &pn48, 1);
+				/* TSC 1 */
+				memcpy(skb->data + offset, ((u8 *)&pn48) + 1, 1);
+				/* TSC 2 , TSC 3 , TSC 4 , TSC 5*/
+				memcpy(skb->data + offset + 4, ((u8 *)&pn48) + 2, 4);
+			}
+		}
 	}
 
 	if (tkip_mic_type == HTT_RX_TKIP_MIC)
@@ -2263,6 +2336,20 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	if (mpdu_ranges->mpdu_range_status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
 		rx_status->flag |= RX_FLAG_MMIC_ERROR;
 
+	if (!qos && tid < IEEE80211_NUM_TIDS) {
+		u8 offset;
+		__le16 qos_ctrl = 0;
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		offset = ieee80211_hdrlen(hdr->frame_control);
+
+		hdr->frame_control |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+		memmove(skb->data - IEEE80211_QOS_CTL_LEN, skb->data, offset);
+		skb_push(skb, IEEE80211_QOS_CTL_LEN);
+		qos_ctrl = cpu_to_le16(tid);
+		memcpy(skb->data + offset, &qos_ctrl, IEEE80211_QOS_CTL_LEN);
+	}
+
 	ieee80211_rx_ni(ar->hw, skb);
 
 	/* We have delivered the skb to the upper layers (mac80211) so we
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] ath10k: add reorder and change PN check logic for mac80211
  2019-08-21  6:23 [PATCH] ath10k: add reorder and change PN check logic for mac80211 Wen Gong
@ 2019-09-10 13:21 ` Kalle Valo
  0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2019-09-10 13:21 UTC (permalink / raw)
  To: Wen Gong; +Cc: ath10k, linux-wireless

Wen Gong <wgong@codeaurora.org> wrote:

> For sdio chip, if the rssi is not good, then it have some retry,
> firmware will indicate the msdu list of a ppdu with a hole, it
> means it lost the hole msdu, after the msdu retry from AP, the
> hole msdu will indicate from firmware later. The hole msdu's PN
> check will fail and the hole msdu will be dropped.
> 
> PN check fail example:
> Sequence number PN number  PN check status
>      3814         6101         success
>      3815         6102         success
>      3816         6103         success
>      3818         6105         success
>      3819         6106         success
>      3820         6107         success
>      3817         6104         fail
> 
> The correct logic is reorder the msdu list and then do PN check.
> ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic
> and then do PN check in ieee80211_rx_h_decrypt of mac80211.
> 
> example after reorder:
> Sequence number PN number  PN check status
>      3814         6101         success
>      3815         6102         success
>      3816         6103         success
>      3817         6104         success
>      3818         6105         success
>      3819         6106         success
>      3820         6107         success
> 
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00017-QCARMSWP-1.
> 
> Signed-off-by: Wen Gong <wgong@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

db8deae03271 ath10k: add reorder and change PN check logic for mac80211

-- 
https://patchwork.kernel.org/patch/11105545/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-09-10 13:21 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-21  6:23 [PATCH] ath10k: add reorder and change PN check logic for mac80211 Wen Gong
2019-09-10 13:21 ` Kalle Valo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).