From: "Tomislav Požega" <pozega.tomislav@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: kvalo@codeaurora.org, ath10k@lists.infradead.org
Subject: [PATCH 3/5] ath10k: print supported MCS rates within service ready event
Date: Mon, 23 Sep 2019 21:49:23 +0200 [thread overview]
Message-ID: <1569268165-1639-3-git-send-email-pozega.tomislav@gmail.com> (raw)
In-Reply-To: <1569268165-1639-1-git-send-email-pozega.tomislav@gmail.com>
Add vht_supp_mcs argument to service ready structure and print
supported MCS rates in WMI service ready debug message.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 6 +++++-
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
4 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 2a0a008..153c4a2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -964,6 +964,7 @@ struct ath10k {
u32 hw_eeprom_rd;
u32 ht_cap_info;
u32 vht_cap_info;
+ u32 vht_supp_mcs;
u32 num_rf_chains;
u32 max_spatial_stream;
/* protected by conf_mutex */
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index bda52ca..2432a74 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1201,6 +1201,7 @@ static int ath10k_wmi_tlv_op_pull_svc_rdy_ev(struct ath10k *ar,
arg->max_tx_power = ev->hw_max_tx_power;
arg->ht_cap = ev->ht_cap_info;
arg->vht_cap = ev->vht_cap_info;
+ arg->vht_supp_mcs = ev->vht_supp_mcs;
arg->sw_ver0 = ev->abi.abi_ver0;
arg->sw_ver1 = ev->abi.abi_ver1;
arg->fw_build = ev->fw_build_vers;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b7b8072..2d43adf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5357,6 +5357,7 @@ static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
arg->max_tx_power = ev->hw_max_tx_power;
arg->ht_cap = ev->ht_cap_info;
arg->vht_cap = ev->vht_cap_info;
+ arg->vht_supp_mcs = ev->vht_supp_mcs;
arg->sw_ver0 = ev->sw_version;
arg->sw_ver1 = ev->sw_version_1;
arg->phy_capab = ev->phy_capability;
@@ -5398,6 +5399,7 @@ static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
arg->max_tx_power = ev->hw_max_tx_power;
arg->ht_cap = ev->ht_cap_info;
arg->vht_cap = ev->vht_cap_info;
+ arg->vht_supp_mcs = ev->vht_supp_mcs;
arg->sw_ver0 = ev->sw_version;
arg->phy_capab = ev->phy_capability;
arg->num_rf_chains = ev->num_rf_chains;
@@ -5449,6 +5451,7 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
ar->hw_max_tx_power = __le32_to_cpu(arg.max_tx_power);
ar->ht_cap_info = __le32_to_cpu(arg.ht_cap);
ar->vht_cap_info = __le32_to_cpu(arg.vht_cap);
+ ar->vht_supp_mcs = __le32_to_cpu(arg.vht_supp_mcs);
ar->fw_version_major =
(__le32_to_cpu(arg.sw_ver0) & 0xff000000) >> 24;
ar->fw_version_minor = (__le32_to_cpu(arg.sw_ver0) & 0x00ffffff);
@@ -5563,11 +5566,12 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
skip_mem_alloc:
ath10k_dbg(ar, ATH10K_DBG_WMI,
- "wmi event service ready min_tx_power 0x%08x max_tx_power 0x%08x ht_cap 0x%08x vht_cap 0x%08x sw_ver0 0x%08x sw_ver1 0x%08x fw_build 0x%08x phy_capab 0x%08x num_rf_chains 0x%08x eeprom_rd 0x%08x low_2ghz_chan %d high_2ghz_chan %d low_5ghz_chan %d high_5ghz_chan %d num_mem_reqs 0x%08x\n",
+ "wmi event service ready min_tx_power 0x%08x max_tx_power 0x%08x ht_cap 0x%08x vht_cap 0x%08x vht_supp_mcs 0x%08x sw_ver0 0x%08x sw_ver1 0x%08x fw_build 0x%08x phy_capab 0x%08x num_rf_chains 0x%08x eeprom_rd 0x%08x low_2ghz_chan %d high_2ghz_chan %d low_5ghz_chan %d high_5ghz_chan %d num_mem_reqs 0x%08x\n",
__le32_to_cpu(arg.min_tx_power),
__le32_to_cpu(arg.max_tx_power),
__le32_to_cpu(arg.ht_cap),
__le32_to_cpu(arg.vht_cap),
+ __le32_to_cpu(arg.vht_supp_mcs),
__le32_to_cpu(arg.sw_ver0),
__le32_to_cpu(arg.sw_ver1),
__le32_to_cpu(arg.fw_build),
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9ccaeb7..d9d53e5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6863,6 +6863,7 @@ struct wmi_svc_rdy_ev_arg {
__le32 max_tx_power;
__le32 ht_cap;
__le32 vht_cap;
+ __le32 vht_supp_mcs;
__le32 sw_ver0;
__le32 sw_ver1;
__le32 fw_build;
--
1.7.0.4
next prev parent reply other threads:[~2019-09-23 19:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 19:49 [PATCH 1/5] ath10k: add 2ghz channel arguments to service ready structure Tomislav Požega
2019-09-23 19:49 ` [PATCH 2/5] ath10k: print service ready returned channel range Tomislav Požega
2019-09-23 19:49 ` Tomislav Požega [this message]
2019-09-23 19:49 ` [PATCH 4/5] ath10k: change sw version print format to hex Tomislav Požega
2019-09-23 19:49 ` [PATCH 5/5] ath10k: pull_svc_rdy code-style fix Tomislav Požega
2019-09-24 5:30 ` Kalle Valo
2019-09-24 7:49 ` Tom Psyborg
2019-10-04 18:56 ` Jeff Johnson
2019-10-01 11:15 ` [PATCH 1/5] ath10k: add 2ghz channel arguments to service ready structure Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569268165-1639-3-git-send-email-pozega.tomislav@gmail.com \
--to=pozega.tomislav@gmail.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).