linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [PATCH RFT] ath10k: add QCA9377 sdio hw_param item
Date: Thu, 26 Sep 2019 17:24:27 +0300	[thread overview]
Message-ID: <1569507867-19547-1-git-send-email-kvalo@codeaurora.org> (raw)

From: Erik Stromdahl <erik.stromdahl@gmail.com>

Add hardware parameters for QCA9377 sdio devices, it's now properly supported.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

I don't have any working QCA9377 SDIO hardware so I would appreciate any
test reports. This should apply cleanly to ath.git master branch (at least to
tag ath-201909230832):

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/log/?h=master

 drivers/net/wireless/ath/ath10k/core.c | 27 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  3 +++
 2 files changed, 30 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 36c62d66c19e..e5572d4b6ae9 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -539,6 +539,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.tx_stats_over_pktlog = false,
 	},
 	{
+		.id = QCA9377_HW_1_1_DEV_VERSION,
+		.dev_id = QCA9377_1_0_DEVICE_ID,
+		.bus = ATH10K_BUS_SDIO,
+		.name = "qca9377 hw1.1 sdio",
+		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 19,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.cal_data_len = 8124,
+		.fw = {
+			.dir = QCA9377_HW_1_0_FW_DIR,
+			.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
+			.board_size = QCA9377_BOARD_DATA_SZ,
+			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+		},
+		.hw_ops = &qca6174_ops,
+		.hw_clk = qca6174_clk,
+		.target_cpu_freq = 176000000,
+		.decap_align_bytes = 4,
+		.n_cipher_suites = 8,
+		.num_peers = TARGET_QCA9377_HL_NUM_PEERS,
+		.ast_skid_limit = 0x10,
+		.num_wds_entries = 0x20,
+		.uart_pin_workaround = true,
+	},
+	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
 		.dev_id = 0,
 		.bus = ATH10K_BUS_AHB,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 2ae57c1de7b5..ddb1d23ec6de 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -768,6 +768,9 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw,
 #define TARGET_HL_TLV_AST_SKID_LIMIT		16
 #define TARGET_HL_TLV_NUM_WDS_ENTRIES		2
 
+/* Target specific defines for QCA9377 high latency firmware */
+#define TARGET_QCA9377_HL_NUM_PEERS		15
+
 /* Diagnostic Window */
 #define CE_DIAG_PIPE	7
 
-- 
2.7.4


             reply	other threads:[~2019-09-26 14:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-26 14:24 Kalle Valo [this message]
2020-03-02 11:45 ` [PATCH RFT] ath10k: add QCA9377 sdio hw_param item Christian Hewitt
2020-03-04 17:51   ` Erik Stromdahl
2020-03-11 16:52     ` Kalle Valo
2020-03-11 16:33 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1569507867-19547-1-git-send-email-kvalo@codeaurora.org \
    --to=kvalo@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=erik.stromdahl@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).