Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 1/2] nl80211: vendor-cmd: qca: add dynamic SAR power limits
Date: Wed, 18 Dec 2019 17:48:27 +0200
Message-ID: <1576684108-30177-2-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1576684108-30177-1-git-send-email-kvalo@codeaurora.org>

From: Wen Gong <wgong@codeaurora.org>

The vendor commands is to add API for user to configure dynamic SAR
power limits, it will not replace the existing power control
functionality, it is to make more convenient to configure power.

An example of usage(wlan0 is the wireless interface dev name):
iw dev wlan0 vendor send 0x1374 0x92 0x2C 0x00 0x03 0x00 0x14 0x00 0x01
0x00 0x08 0x00 0x07 0x00 0x22 0x00 0x00 0x00 0x08 0x00 0x04 0x00 0x00
0x00 0x00 0x00 0x14 0x00 0x02 0x00 0x08 0x00 0x07 0x00 0x11 0x00 0x00
0x00 0x08 0x00 0x04 0x00 0x01 0x00 0x00 0x00

means of bytes:
0x1374: vendor id
0x92: vendor subcmd id
0x22: 2.4G power limit
0x11: 5G power limit

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 include/uapi/nl80211-vnd-qca.h | 68 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 include/uapi/nl80211-vnd-qca.h

diff --git a/include/uapi/nl80211-vnd-qca.h b/include/uapi/nl80211-vnd-qca.h
new file mode 100644
index 000000000000..482c9409a2c0
--- /dev/null
+++ b/include/uapi/nl80211-vnd-qca.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2019 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _UAPI_NL80211_VND_QCA_H
+#define _UAPI_NL80211_VND_QCA_H
+
+/* Vendor id to be used in vendor specific command and events to user space
+ * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID,
+ * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and
+ * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in
+ * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that
+ */
+#define QCA_NL80211_VENDOR_ID 0x001374
+
+/**
+ * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
+ *
+ *@QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the
+ *	settings currently in use. The attributes returned by this command are
+ *	defined by enum qca_vendor_attr_sar_limits.
+ */
+enum qca_nl80211_vendor_subcmds {
+	QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
+	};
+
+/**
+ * enum qca_vendor_attr_sar_limits - Attributes for SAR power limits
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power
+ *	limit specifications. The number of specifications is
+ *	specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each
+ *	specification contains a set of
+ *	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A
+ *	specification is uniquely identified by the attributes
+ *	%QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND and always
+ *	contains as a payload the attribute
+ *	%QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to
+ *	indicate for which band this specification applies. Valid
+ *	values are enumerated in enum %nl80211_band (although not all
+ *	bands may be supported by a given device). If the attribute is
+ *	not supplied then the specification will be applied to all
+ *	supported bands.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32)
+ *	value to specify the actual power limit value in units of 0.5
+ *	dBm (i.e., a value of 11 represents 5.5 dBm).
+ *	This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is
+ *	%QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER.
+ *
+ * These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS
+ * and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS.
+ */
+enum qca_vendor_attr_sar_limits {
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3,
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4,
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7,
+
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX =
+		QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1
+};
+
+#endif /* _UAPI_NL80211_VND_QCA_H_ */
-- 
2.7.4

  reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18 15:48 [PATCH 0/2] ath10k: SAR power limit vendor command Kalle Valo
2019-12-18 15:48 ` Kalle Valo [this message]
2019-12-19  9:44   ` [PATCH 1/2] nl80211: vendor-cmd: qca: add dynamic SAR power limits Pkshih
2019-12-19 15:48     ` Jouni Malinen
2019-12-19 18:32       ` Brian Norris
2019-12-19 18:55         ` Jouni Malinen
2019-12-19 23:40           ` Brian Norris
2020-03-17 16:54             ` Kalle Valo
2020-03-20 12:55               ` Johannes Berg
2020-06-02  1:32                 ` Brian Norris
2020-07-16  9:35                   ` Kalle Valo
2020-07-16 18:56                     ` Brian Norris
2020-07-24  9:26                       ` Kalle Valo
2020-07-30 13:24                         ` Johannes Berg
2020-08-01  1:31                           ` Brian Norris
2020-09-08  5:55                           ` Kalle Valo
2020-07-30 13:17                   ` Johannes Berg
2019-12-18 15:48 ` [PATCH 2/2] ath10k: allow dynamic SAR power limits to be configured Kalle Valo
2019-12-19  9:45   ` Pkshih
2020-04-16  7:38   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576684108-30177-2-git-send-email-kvalo@codeaurora.org \
    --to=kvalo@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git