From: Kalle Valo <kvalo@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 1/2] ath11k: qmi: add more debug messages
Date: Wed, 17 Feb 2021 15:43:40 +0200 [thread overview]
Message-ID: <1613569421-14177-1-git-send-email-kvalo@codeaurora.org> (raw)
To make it easier to follow the qmi event flow.
No functional changes, compile tested only.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/qmi.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index eb1b987c9df2..69eb67a94f47 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1556,6 +1556,8 @@ static int ath11k_qmi_host_cap_send(struct ath11k_base *ab)
req.nm_modem |= SLEEP_CLOCK_SELECT_INTERNAL_BIT;
}
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi host cap request\n");
+
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_host_cap_resp_msg_v01_ei, &resp);
if (ret < 0)
@@ -1624,6 +1626,8 @@ static int ath11k_qmi_fw_ind_register_send(struct ath11k_base *ab)
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi indication register request\n");
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_IND_REGISTER_REQ_V01,
QMI_WLANFW_IND_REGISTER_REQ_MSG_V01_MAX_LEN,
@@ -1699,6 +1703,9 @@ static int ath11k_qmi_respond_fw_mem_request(struct ath11k_base *ab)
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi respond memory request delayed %i\n",
+ delayed);
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_RESPOND_MEM_REQ_V01,
QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN,
@@ -1843,6 +1850,8 @@ static int ath11k_qmi_request_target_cap(struct ath11k_base *ab)
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi target cap request\n");
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_CAP_REQ_V01,
QMI_WLANFW_CAP_REQ_MSG_V01_MAX_LEN,
@@ -2000,6 +2009,9 @@ static int ath11k_qmi_load_bdf_fixed_addr(struct ath11k_base *ab)
if (ret < 0)
goto out_qmi_bdf;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf download req fixed addr type %d\n",
+ type);
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_BDF_DOWNLOAD_REQ_V01,
QMI_WLANFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_LEN,
@@ -2090,6 +2102,9 @@ static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab)
if (ret < 0)
goto out_qmi_bdf;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi bdf download request remaining %i\n",
+ remaining);
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_BDF_DOWNLOAD_REQ_V01,
QMI_WLANFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_LEN,
@@ -2200,6 +2215,8 @@ static int ath11k_qmi_wlanfw_m3_info_send(struct ath11k_base *ab)
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi m3 info req\n");
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_M3_INFO_REQ_V01,
QMI_WLANFW_M3_INFO_REQ_MSG_V01_MAX_MSG_LEN,
@@ -2246,6 +2263,8 @@ static int ath11k_qmi_wlanfw_mode_send(struct ath11k_base *ab,
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi wlan mode req mode %d\n", mode);
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_WLAN_MODE_REQ_V01,
QMI_WLANFW_WLAN_MODE_REQ_MSG_V01_MAX_LEN,
@@ -2338,6 +2357,8 @@ static int ath11k_qmi_wlanfw_wlan_cfg_send(struct ath11k_base *ab)
if (ret < 0)
goto out;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi wlan cfg req\n");
+
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_WLAN_CFG_REQ_V01,
QMI_WLANFW_WLAN_CFG_REQ_MSG_V01_MAX_LEN,
@@ -2370,6 +2391,8 @@ void ath11k_qmi_firmware_stop(struct ath11k_base *ab)
{
int ret;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi firmware stop\n");
+
ret = ath11k_qmi_wlanfw_mode_send(ab, ATH11K_FIRMWARE_MODE_OFF);
if (ret < 0) {
ath11k_warn(ab, "qmi failed to send wlan mode off\n");
@@ -2382,6 +2405,8 @@ int ath11k_qmi_firmware_start(struct ath11k_base *ab,
{
int ret;
+ ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi firmware start\n");
+
ret = ath11k_qmi_wlanfw_wlan_cfg_send(ab);
if (ret < 0) {
ath11k_warn(ab, "qmi failed to send wlan cfg:%d\n", ret);
--
2.7.4
next reply other threads:[~2021-02-17 13:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-17 13:43 Kalle Valo [this message]
2021-02-17 13:43 ` [PATCH 2/2] ath11k: qmi: cosmetic changes to error messages Kalle Valo
2021-02-24 6:52 ` [PATCH 1/2] ath11k: qmi: add more debug messages Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1613569421-14177-1-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).