From: Martin Fuzzey <martin.fuzzey@flowbird.group>
To: linux-wireless@vger.kernel.org
Cc: Amitkumar Karwar <amitkarwar@gmail.com>,
Siva Rebbagondla <siva8118@gmail.com>,
Kalle Valo <kvalo@codeaurora.org>,
Jakub Kicinski <kuba@kernel.org>,
Prameela Rani Garnepudi <prameela.j04cs@gmail.com>,
linux-kernel@vger.kernel.org,
Martin Fuzzey <martin.fuzzey@flowbird.group>
Subject: [PATCH v2 1/3] rsi: fix occasional initialisation failure with BT coex
Date: Mon, 30 Aug 2021 17:26:44 +0200 [thread overview]
Message-ID: <1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group> (raw)
In-Reply-To: <1630337206-12410-1-git-send-email-martin.fuzzey@flowbird.group>
When BT coexistence is enabled (eg oper mode 13, which is the default)
the initialisation on startup sometimes silently fails.
In a normal initialisation we see
usb 1-1.3: Product: Wireless USB Network Module
usb 1-1.3: Manufacturer: Redpine Signals, Inc.
usb 1-1.3: SerialNumber: 000000000001
rsi_91x: rsi_probe: Initialized os intf ops
rsi_91x: rsi_load_9116_firmware: Loading chunk 0
rsi_91x: rsi_load_9116_firmware: Loading chunk 1
rsi_91x: rsi_load_9116_firmware: Loading chunk 2
rsi_91x: Max Stations Allowed = 1
But sometimes the last log is missing and the wlan net device is
not created.
Running a userspace loop that resets the hardware via a GPIO shows the
problem occurring ~5/100 resets.
The problem does not occur in oper mode 1 (wifi only).
Adding logs shows that the initialisation state machine requests a MAC
reset via rsi_send_reset_mac() but the firmware does not reply, leading
to the initialisation sequence being incomplete.
Fix this by delaying attaching the BT adapter until the wifi
initialisation has completed.
With this applied I have done > 300 reset loops with no errors.
Fixes: 716b840c7641 ("rsi: handle BT traffic in driver")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
CC: stable@vger.kernel.org
---
drivers/net/wireless/rsi/rsi_91x_main.c | 16 +++++++++++++---
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++
drivers/net/wireless/rsi/rsi_main.h | 2 ++
3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index d984832..143224a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -211,9 +211,10 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
if (bt_pkt_type == BT_CARD_READY_IND) {
rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
- if (rsi_bt_ops.attach(common, &g_proto_ops))
- rsi_dbg(ERR_ZONE,
- "Failed to attach BT module\n");
+ if (common->fsm_state == FSM_MAC_INIT_DONE)
+ rsi_attach_bt(common);
+ else
+ common->bt_defer_attach = true;
} else {
if (common->bt_adapter)
rsi_bt_ops.recv_pkt(common->bt_adapter,
@@ -278,6 +279,15 @@ void rsi_set_bt_context(void *priv, void *bt_context)
}
#endif
+void rsi_attach_bt(struct rsi_common *common)
+{
+#ifdef CONFIG_RSI_COEX
+ if (rsi_bt_ops.attach(common, &g_proto_ops))
+ rsi_dbg(ERR_ZONE,
+ "Failed to attach BT module\n");
+#endif
+}
+
/**
* rsi_91x_init() - This function initializes os interface operations.
* @oper_mode: One of DEV_OPMODE_*.
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index 891fd5f..a25742a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -2071,6 +2071,9 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common,
if (common->reinit_hw) {
complete(&common->wlan_init_completion);
} else {
+ if (common->bt_defer_attach)
+ rsi_attach_bt(common);
+
return rsi_mac80211_attach(common);
}
}
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index 0f53585..a3e4fd5 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -320,6 +320,7 @@ struct rsi_common {
struct ieee80211_vif *roc_vif;
bool eapol4_confirm;
+ bool bt_defer_attach;
void *bt_adapter;
struct cfg80211_scan_request *hwscan;
@@ -401,5 +402,6 @@ struct rsi_host_intf_ops {
enum rsi_host_intf rsi_get_host_intf(void *priv);
void rsi_set_bt_context(void *priv, void *bt_context);
+void rsi_attach_bt(struct rsi_common *common);
#endif
--
1.9.1
next prev parent reply other threads:[~2021-08-30 15:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 15:26 [PATCH v2 0/3] rsi: fix startup and P2P mode Martin Fuzzey
2021-08-30 15:26 ` Martin Fuzzey [this message]
2021-09-21 5:43 ` [PATCH v2 1/3] rsi: fix occasional initialisation failure with BT coex Kalle Valo
2021-08-30 15:26 ` [PATCH v2 2/3] rsi: fix key enabled check causing unwanted encryption for vap_id > 0 Martin Fuzzey
2021-08-30 15:26 ` [PATCH v2 3/3] rsi: fix rate mask set leading to P2P failure Martin Fuzzey
2021-09-21 5:49 ` [PATCH v2 0/3] rsi: fix startup and P2P mode Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group \
--to=martin.fuzzey@flowbird.group \
--cc=amitkarwar@gmail.com \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=prameela.j04cs@gmail.com \
--cc=siva8118@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).