linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Muna Sinada <quic_msinada@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
	Muna Sinada <quic_msinada@quicinc.com>,
	Anilkumar Kolli <quic_akolli@quicinc.com>
Subject: [PATCH v2 2/4] wifi: ath11k: push MU-MIMO params from hostapd to hardware
Date: Tue, 18 Oct 2022 14:28:19 -0700	[thread overview]
Message-ID: <1666128501-12364-3-git-send-email-quic_msinada@quicinc.com> (raw)
In-Reply-To: <1666128501-12364-1-git-send-email-quic_msinada@quicinc.com>

In the previous behaviour only HE IE in management frames are changed
regarding MU-MIMO configurations and not in hardware. Adding push of
MU-MIMO configurations to the hardware as well.

This patch is dependant on mac80211 patchset:
https://patchwork.kernel.org/project/linux-wireless/list/?series=683322&state=%2A&archive=both

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1

Co-developed-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 199 +++++++++++++++++++++-------------
 drivers/net/wireless/ath/ath11k/wmi.h |   3 +
 2 files changed, 129 insertions(+), 73 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 6d83a178a891..83d4a565fe84 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2697,6 +2697,117 @@ static int ath11k_setup_peer_smps(struct ath11k *ar, struct ath11k_vif *arvif,
 					 ath11k_smps_map[smps]);
 }
 
+static bool ath11k_mac_set_he_txbf_conf(struct ath11k_vif *arvif)
+{
+	struct ath11k *ar = arvif->ar;
+	u32 param, value;
+	int ret;
+
+	if (!arvif->vif->bss_conf.he_support)
+		return true;
+
+	param = WMI_VDEV_PARAM_SET_HEMU_MODE;
+	value = 0;
+	if (arvif->vif->bss_conf.he_su_beamformer) {
+		value |= FIELD_PREP(HE_MODE_SU_TX_BFER, HE_SU_BFER_ENABLE);
+		if (arvif->vif->bss_conf.he_mu_beamformer &&
+		    arvif->vdev_type == WMI_VDEV_TYPE_AP)
+			value |= FIELD_PREP(HE_MODE_MU_TX_BFER, HE_MU_BFER_ENABLE);
+	}
+
+	if (arvif->vif->type != NL80211_IFTYPE_MESH_POINT) {
+		value |= FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
+			 FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
+
+		if (arvif->vif->bss_conf.he_full_ul_mumimo)
+			value |= FIELD_PREP(HE_MODE_UL_MUMIMO, HE_UL_MUMIMO_ENABLE);
+
+		if (arvif->vif->bss_conf.he_su_beamformee)
+			value |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
+	}
+
+	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to set vdev %d HE MU mode: %d\n",
+			    arvif->vdev_id, ret);
+		return false;
+	}
+
+	param = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
+	value =	FIELD_PREP(HE_VHT_SOUNDING_MODE, HE_VHT_SOUNDING_MODE_ENABLE) |
+		FIELD_PREP(HE_TRIG_NONTRIG_SOUNDING_MODE,
+			   HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE);
+	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+					    param, value);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to set vdev %d sounding mode: %d\n",
+			    arvif->vdev_id, ret);
+		return false;
+	}
+	return true;
+}
+
+static bool ath11k_mac_vif_recalc_sta_he_txbf(struct ath11k *ar,
+					      struct ieee80211_vif *vif,
+					      struct ieee80211_sta_he_cap *he_cap)
+{
+	struct ath11k_vif *arvif = (void *)vif->drv_priv;
+	struct ieee80211_he_cap_elem he_cap_elem = {0};
+	struct ieee80211_sta_he_cap *cap_band = NULL;
+	struct cfg80211_chan_def def;
+	u32 param = WMI_VDEV_PARAM_SET_HEMU_MODE;
+	u32 hemode = 0;
+	int ret;
+
+	if (!vif->bss_conf.he_support)
+		return true;
+
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return false;
+
+	if (WARN_ON(ath11k_mac_vif_chan(vif, &def)))
+		return false;
+
+	if (def.chan->band == NL80211_BAND_2GHZ)
+		cap_band = &ar->mac.iftype[NL80211_BAND_2GHZ][vif->type].he_cap;
+	else
+		cap_band = &ar->mac.iftype[NL80211_BAND_5GHZ][vif->type].he_cap;
+
+	memcpy(&he_cap_elem, &cap_band->he_cap_elem, sizeof(he_cap_elem));
+
+	if (HECAP_PHY_SUBFME_GET(he_cap_elem.phy_cap_info)) {
+		if (HECAP_PHY_SUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
+			hemode |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
+		if (HECAP_PHY_MUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
+			hemode |= FIELD_PREP(HE_MODE_MU_TX_BFEE, HE_MU_BFEE_ENABLE);
+	}
+
+	if (vif->type != NL80211_IFTYPE_MESH_POINT) {
+		hemode |= FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
+			  FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
+
+		if (HECAP_PHY_ULMUMIMO_GET(he_cap_elem.phy_cap_info))
+			if (HECAP_PHY_ULMUMIMO_GET(he_cap->he_cap_elem.phy_cap_info))
+				hemode |= FIELD_PREP(HE_MODE_UL_MUMIMO,
+						     HE_UL_MUMIMO_ENABLE);
+
+		if (FIELD_GET(HE_MODE_MU_TX_BFEE, hemode))
+			hemode |= FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE);
+
+		if (FIELD_GET(HE_MODE_MU_TX_BFER, hemode))
+			hemode |= FIELD_PREP(HE_MODE_SU_TX_BFER, HE_SU_BFER_ENABLE);
+	}
+
+	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, hemode);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to submit vdev param txbf 0x%x: %d\n",
+			    hemode, ret);
+		return false;
+	}
+
+	return true;
+}
+
 static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     struct ieee80211_bss_conf *bss_conf)
@@ -2707,6 +2818,7 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 	struct ieee80211_sta *ap_sta;
 	struct ath11k_peer *peer;
 	bool is_auth = false;
+	struct ieee80211_sta_he_cap  he_cap;
 	int ret;
 
 	lockdep_assert_held(&ar->conf_mutex);
@@ -2723,6 +2835,8 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 		rcu_read_unlock();
 		return;
 	}
+	/* he_cap here is updated at assoc success for sta mode only */
+	he_cap  = ap_sta->deflink.he_cap;
 
 	ath11k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg, false);
 
@@ -2751,6 +2865,12 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 		return;
 	}
 
+	if (!ath11k_mac_vif_recalc_sta_he_txbf(ar, vif, &he_cap)) {
+		ath11k_warn(ar->ab, "failed to recalc he txbf for vdev %i on bss %pM\n",
+			    arvif->vdev_id, bss_conf->bssid);
+		return;
+	}
+
 	WARN_ON(arvif->is_up);
 
 	arvif->aid = vif->cfg.aid;
@@ -3200,6 +3320,8 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 		ether_addr_copy(arvif->bssid, info->bssid);
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
+		if (info->enable_beacon)
+			ath11k_mac_set_he_txbf_conf(arvif);
 		ath11k_control_beaconing(arvif, info);
 
 		if (arvif->is_up && vif->bss_conf.he_support &&
@@ -5369,6 +5491,10 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
 
 		he_cap_elem->mac_cap_info[1] &=
 			IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
+		he_cap_elem->phy_cap_info[0] &=
+			~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+		he_cap_elem->phy_cap_info[0] &=
+			~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
 
 		he_cap_elem->phy_cap_info[5] &=
 			~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
@@ -6003,69 +6129,6 @@ ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
 	}
 }
 
-static u32
-ath11k_mac_prepare_he_mode(struct ath11k_pdev *pdev, u32 viftype)
-{
-	struct ath11k_pdev_cap *pdev_cap = &pdev->cap;
-	struct ath11k_band_cap *cap_band = NULL;
-	u32 *hecap_phy_ptr = NULL;
-	u32 hemode = 0;
-
-	if (pdev->cap.supported_bands & WMI_HOST_WLAN_2G_CAP)
-		cap_band = &pdev_cap->band[NL80211_BAND_2GHZ];
-	else
-		cap_band = &pdev_cap->band[NL80211_BAND_5GHZ];
-
-	hecap_phy_ptr = &cap_band->he_cap_phy_info[0];
-
-	hemode = FIELD_PREP(HE_MODE_SU_TX_BFEE, HE_SU_BFEE_ENABLE) |
-		 FIELD_PREP(HE_MODE_SU_TX_BFER, HECAP_PHY_SUBFMR_GET(hecap_phy_ptr)) |
-		 FIELD_PREP(HE_MODE_UL_MUMIMO, HECAP_PHY_ULMUMIMO_GET(hecap_phy_ptr));
-
-	/* TODO WDS and other modes */
-	if (viftype == NL80211_IFTYPE_AP) {
-		hemode |= FIELD_PREP(HE_MODE_MU_TX_BFER,
-			  HECAP_PHY_MUBFMR_GET(hecap_phy_ptr)) |
-			  FIELD_PREP(HE_MODE_DL_OFDMA, HE_DL_MUOFDMA_ENABLE) |
-			  FIELD_PREP(HE_MODE_UL_OFDMA, HE_UL_MUOFDMA_ENABLE);
-	} else {
-		hemode |= FIELD_PREP(HE_MODE_MU_TX_BFEE, HE_MU_BFEE_ENABLE);
-	}
-
-	return hemode;
-}
-
-static int ath11k_set_he_mu_sounding_mode(struct ath11k *ar,
-					  struct ath11k_vif *arvif)
-{
-	u32 param_id, param_value;
-	struct ath11k_base *ab = ar->ab;
-	int ret = 0;
-
-	param_id = WMI_VDEV_PARAM_SET_HEMU_MODE;
-	param_value = ath11k_mac_prepare_he_mode(ar->pdev, arvif->vif->type);
-	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
-					    param_id, param_value);
-	if (ret) {
-		ath11k_warn(ab, "failed to set vdev %d HE MU mode: %d param_value %x\n",
-			    arvif->vdev_id, ret, param_value);
-		return ret;
-	}
-	param_id = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
-	param_value =
-		FIELD_PREP(HE_VHT_SOUNDING_MODE, HE_VHT_SOUNDING_MODE_ENABLE) |
-		FIELD_PREP(HE_TRIG_NONTRIG_SOUNDING_MODE,
-			   HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE);
-	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
-					    param_id, param_value);
-	if (ret) {
-		ath11k_warn(ab, "failed to set vdev %d HE MU mode: %d\n",
-			    arvif->vdev_id, ret);
-		return ret;
-	}
-	return ret;
-}
-
 static void ath11k_mac_op_update_vif_offload(struct ieee80211_hw *hw,
 					     struct ieee80211_vif *vif)
 {
@@ -6734,7 +6797,6 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 	struct ath11k_base *ab = ar->ab;
 	struct wmi_vdev_start_req_arg arg = {};
 	const struct cfg80211_chan_def *chandef = &ctx->def;
-	int he_support = arvif->vif->bss_conf.he_support;
 	int ret = 0;
 
 	lockdep_assert_held(&ar->conf_mutex);
@@ -6775,15 +6837,6 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 		spin_lock_bh(&ab->base_lock);
 		arg.regdomain = ar->ab->dfs_region;
 		spin_unlock_bh(&ab->base_lock);
-
-		if (he_support) {
-			ret = ath11k_set_he_mu_sounding_mode(ar, arvif);
-			if (ret) {
-				ath11k_warn(ar->ab, "failed to set he mode vdev %i\n",
-					    arg.vdev_id);
-				return ret;
-			}
-		}
 	}
 
 	arg.channel.passive |= !!(chandef->chan->flags & IEEE80211_CHAN_NO_IR);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 368b7755e800..7e1eea784eb5 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2895,8 +2895,11 @@ struct rx_reorder_queue_remove_params {
 #define HE_DL_MUOFDMA_ENABLE	1
 #define HE_UL_MUOFDMA_ENABLE	1
 #define HE_DL_MUMIMO_ENABLE	1
+#define HE_UL_MUMIMO_ENABLE	1
 #define HE_MU_BFEE_ENABLE	1
 #define HE_SU_BFEE_ENABLE	1
+#define HE_MU_BFER_ENABLE	1
+#define HE_SU_BFER_ENABLE	1
 
 #define HE_VHT_SOUNDING_MODE_ENABLE		1
 #define HE_SU_MU_SOUNDING_MODE_ENABLE		1
-- 
2.7.4


  parent reply	other threads:[~2022-10-18 21:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-18 21:28 [PATCH v2 0/4] wifi: ath11k: push MU-MIMO configurations to hardware Muna Sinada
2022-10-18 21:28 ` [PATCH v2 1/4] wifi: ath11k: modify accessor macros to match index size Muna Sinada
2023-02-27 12:26   ` Kalle Valo
2022-10-18 21:28 ` Muna Sinada [this message]
2023-03-28 11:11   ` [PATCH v2 2/4] wifi: ath11k: push MU-MIMO params from hostapd to hardware Robert Marko
2023-03-29  9:45     ` Kalle Valo
2023-03-29 10:42       ` Robert Marko
2023-03-29 11:28         ` Kalle Valo
2023-04-05  8:19           ` Kalle Valo
2023-04-12 23:19             ` Muna Sinada (QUIC)
2023-04-14  5:18               ` Kalle Valo
2023-04-18  9:09                 ` Kalle Valo
2023-04-18  9:10                   ` Robert Marko
2022-10-18 21:28 ` [PATCH v2 3/4] wifi: ath11k: move HE MCS mapper to a separate function Muna Sinada
2022-10-18 21:28 ` [PATCH v2 4/4] wifi: ath11k: generate rx and tx mcs maps for supported HE mcs Muna Sinada
2023-04-05  8:25 ` wifi: ath11k: push MU-MIMO configurations to hardware Kernel.org Bugbot
2023-04-19 14:41 ` ath11k: regression with 80+80 and 160MHz channels Kernel.org Bugbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1666128501-12364-3-git-send-email-quic_msinada@quicinc.com \
    --to=quic_msinada@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=quic_akolli@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).