From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.atheros.com ([12.36.123.2]:65015 "EHLO mail.atheros.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755454Ab0DWE6i (ORCPT ); Fri, 23 Apr 2010 00:58:38 -0400 Received: from mail.atheros.com ([10.10.20.108]) by sidewinder.atheros.com for ; Thu, 22 Apr 2010 21:58:38 -0700 From: Sujith MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Message-ID: <19409.10472.450708.915467@gargle.gargle.HOWL> Date: Fri, 23 Apr 2010 10:28:16 +0530 To: CC: Subject: [PATCH 07/11] ath9k_htc: Use USB reboot Sender: linux-wireless-owner@vger.kernel.org List-ID: So, apparently there is a USB reboot command that the target accepts. Using this instead of usb_reset_device() fixes the issue of "descriptor read error" that pops up on repeated load/unload. Signed-off-by: Sujith --- drivers/net/wireless/ath/ath9k/hif_usb.c | 22 +++++++++++++++++++++- 1 files changed, 21 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index cee5feb..31665c5 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -889,6 +889,26 @@ err_alloc: return ret; } +static void ath9k_hif_usb_reboot(struct usb_device *udev) +{ + u32 reboot_cmd = 0xffffffff; + void *buf; + int ret; + + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return; + + memcpy(buf, &reboot_cmd, 4); + + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, USB_REG_OUT_PIPE), + buf, 4, NULL, HZ); + if (ret) + dev_err(&udev->dev, "ath9k_htc: USB reboot failed\n"); + + kfree(buf); +} + static void ath9k_hif_usb_disconnect(struct usb_interface *interface) { struct usb_device *udev = interface_to_usbdev(interface); @@ -903,7 +923,7 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface) } if (hif_dev->flags & HIF_USB_START) - usb_reset_device(udev); + ath9k_hif_usb_reboot(udev); kfree(hif_dev); dev_info(&udev->dev, "ath9k_htc: USB layer deinitialized\n"); -- 1.7.0.5