[PATCH V4 0/8] brcmfmac: chip related changes

[PATCH V4 0/8] brcmfmac: chip related changes

[Chi-Hsien Lin]

This patch series includes various chip-related changes:
* 43012 support
* 4373 saverestore support
* SDIO bus settings
* 4354 raw chipid

Changelog:
V4:
 - Removed bit defines for irrelevant registers from patch 7.
 - Correct patch 0 subject (missing V3).
V3:
 - Update comments for patch 3.
 - Add defines for sr_control0 register bits in patch 7.
V2:
 - Update commit message for patch 1.
 - Update comments for patch 2.
 - Remove CY_4373_F1_MESBUSYCTRL from patch 3.
 - Collapse patch 6 (43102 sr support) in 4 (43012 support). Add helper functions.
 - Remove sr_eng_en variable from patch 8.
 - Collapse patch 10 and 11 in 9 (sdio_aos disable).

Chi-Hsien Lin (3):
  brcmfmac: add support for CYW43012 SDIO chipset
  brcmfmac: allow GCI core enumuration
  brcmfmac: 4373 save-restore support

Madhan Mohan R (1):
  brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373

Naveen Gupta (1):
  brcmfmac: update 43012 F2 watermark setting to fix DMA Error during
    UDP RX Traffic

Winnie Chang (1):
  brcmfmac: add 4354 raw pcie device id

Wright Feng (2):
  brcmfmac: set F2 watermark to 256 for 4373
  brcmfmac: disable command decode in sdio_aos

 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  |   1 +
 .../wireless/broadcom/brcm80211/brcmfmac/chip.c    |  33 ++++--
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |   1 +
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 119 ++++++++++++++++++---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |   9 +-
 .../broadcom/brcm80211/include/brcm_hw_ids.h       |   2 +
 .../broadcom/brcm80211/include/chipcommon.h        |  19 ++++
 include/linux/mmc/sdio_ids.h                       |   1 +
 8 files changed, 163 insertions(+), 22 deletions(-)

-- 
2.1.0

[PATCH V4 1/8] brcmfmac: add 4354 raw pcie device id

[Chi-Hsien Lin]

From: Winnie Chang <winnie.chang@cypress.com>

Add the raw 4354 PCIe device ID for unprogrammed Cypress boards.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Winnie Chang <winnie.chang@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c       | 1 +
 drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 956a8b236836..16d7dda965d8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -2019,6 +2019,7 @@ static const struct dev_pm_ops brcmf_pciedrvr_pm = {
 static const struct pci_device_id brcmf_pcie_devid_table[] = {
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
 	BRCMF_PCIE_DEVICE_SUB(0x4355, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4355),
+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_RAW_DEVICE_ID),
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index 686f7a85a045..acb87238922f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -74,6 +74,7 @@
 /* PCIE Device IDs */
 #define BRCM_PCIE_4350_DEVICE_ID	0x43a3
 #define BRCM_PCIE_4354_DEVICE_ID	0x43df
+#define BRCM_PCIE_4354_RAW_DEVICE_ID	0x4354
 #define BRCM_PCIE_4356_DEVICE_ID	0x43ec
 #define BRCM_PCIE_43567_DEVICE_ID	0x43d3
 #define BRCM_PCIE_43570_DEVICE_ID	0x43d9
-- 
2.1.0

[PATCH V4 2/8] brcmfmac: set F2 watermark to 256 for 4373

[Chi-Hsien Lin]

From: Wright Feng <wright.feng@cypress.com>

We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional
throughput test. Enable watermark to 256 to guarantee the operation
stability.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 26 ++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 22646a3b911e..c833e24c751c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -49,6 +49,10 @@
 #define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2500)
 #define CTL_DONE_TIMEOUT	msecs_to_jiffies(2500)
 
+/* watermark expressed in number of words */
+#define DEFAULT_F2_WATERMARK    0x8
+#define CY_4373_F2_WATERMARK    0x40
+
 #ifdef DEBUG
 
 #define BRCMF_TRAP_INFO_SIZE	80
@@ -138,6 +142,8 @@ struct rte_console {
 /* 1: isolate internal sdio signals, put external pads in tri-state; requires
  * sdio bus power cycle to clear (rev 9) */
 #define SBSDIO_DEVCTL_PADS_ISO		0x08
+/* 1: enable F2 Watermark */
+#define SBSDIO_DEVCTL_F2WM_ENAB		0x10
 /* Force SD->SB reset mapping (rev 11) */
 #define SBSDIO_DEVCTL_SB_RST_CTL	0x30
 /*   Determined by CoreControl bit */
@@ -4046,6 +4052,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	void *nvram;
 	u32 nvram_len;
 	u8 saveclk;
+	u8 devctl;
 
 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
 
@@ -4101,8 +4108,23 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 		brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask),
 				   bus->hostintmask, NULL);
 
-
-		brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err);
+		switch (sdiod->func1->device) {
+		case SDIO_DEVICE_ID_CYPRESS_4373:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
+				  CY_4373_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_4373_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			break;
+		default:
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   DEFAULT_F2_WATERMARK, &err);
+			break;
+		}
 	} else {
 		/* Disable F2 again */
 		sdio_disable_func(sdiod->func2);
-- 
2.1.0

[PATCH V4 3/8] brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373

[Chi-Hsien Lin]

From: Madhan Mohan R <MadhanMohan.R@cypress.com>

Along with F2 watermark (existing) configuration, F1 MesBusyCtrl
should be enabled & sdio device RX FIFO watermark should be
configured to avoid overflow errors.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 +++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 9 ++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index c833e24c751c..7a0601543dff 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -4119,6 +4119,9 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_4373_F2_WATERMARK |
+					   SBSDIO_MESBUSYCTRL_ENAB, &err);
 			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 7faed831f07d..34b031154da9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -77,7 +77,7 @@
 #define SBSDIO_GPIO_OUT			0x10006
 /* gpio enable */
 #define SBSDIO_GPIO_EN			0x10007
-/* rev < 7, watermark for sdio device */
+/* rev < 7, watermark for sdio device TX path */
 #define SBSDIO_WATERMARK		0x10008
 /* control busy signal generation */
 #define SBSDIO_DEVICE_CTL		0x10009
@@ -104,6 +104,13 @@
 #define SBSDIO_FUNC1_RFRAMEBCHI		0x1001C
 /* MesBusyCtl (rev 11) */
 #define SBSDIO_FUNC1_MESBUSYCTRL	0x1001D
+/* Watermark for sdio device RX path */
+#define SBSDIO_MESBUSY_RXFIFO_WM_MASK	0x7F
+#define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT	0
+/* Enable busy capability for MES access */
+#define SBSDIO_MESBUSYCTRL_ENAB		0x80
+#define SBSDIO_MESBUSYCTRL_ENAB_SHIFT	7
+
 /* Sdio Core Rev 12 */
 #define SBSDIO_FUNC1_WAKEUPCTRL		0x1001E
 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK		0x1
-- 
2.1.0

[PATCH V4 4/8] brcmfmac: add support for CYW43012 SDIO chipset

[Chi-Hsien Lin]

CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It
is an Ultra Low Power WLAN+BT combo chip.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  |  1 +
 .../wireless/broadcom/brcm80211/brcmfmac/chip.c    | 14 +++-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 74 ++++++++++++++++++----
 .../broadcom/brcm80211/include/brcm_hw_ids.h       |  1 +
 include/linux/mmc/sdio_ids.h                       |  1 +
 5 files changed, 78 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index b2ad2122c8c4..d64bf233b12c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -983,6 +983,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_4373),
+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_43012),
 	{ /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 927d62b3d41b..a3c857721446 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -165,6 +165,7 @@ struct sbconfig {
 #define SRCI_LSS_MASK		0x00f00000
 #define SRCI_LSS_SHIFT		20
 #define	SRCI_SRNB_MASK		0xf0
+#define	SRCI_SRNB_MASK_EXT	0x100
 #define	SRCI_SRNB_SHIFT		4
 #define	SRCI_SRBSZ_MASK		0xf
 #define	SRCI_SRBSZ_SHIFT	0
@@ -592,7 +593,13 @@ static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize,
 		if (lss != 0)
 			*ramsize += (1 << ((lss - 1) + SR_BSZ_BASE));
 	} else {
-		nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
+		/* length of SRAM Banks increased for corerev greater than 23 */
+		if (sr->pub.rev >= 23) {
+			nb = (coreinfo & (SRCI_SRNB_MASK | SRCI_SRNB_MASK_EXT))
+				>> SRCI_SRNB_SHIFT;
+		} else {
+			nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
+		}
 		for (i = 0; i < nb; i++) {
 			retent = brcmf_chip_socram_banksize(sr, i, &banksize);
 			*ramsize += banksize;
@@ -1356,6 +1363,11 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 		addr = CORE_CC_REG(base, sr_control1);
 		reg = chip->ops->read32(chip->ctx, addr);
 		return reg != 0;
+	case CY_CC_43012_CHIP_ID:
+		addr = CORE_CC_REG(pmu->base, retention_ctl);
+		reg = chip->ops->read32(chip->ctx, addr);
+		return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
+			       PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
 	default:
 		addr = CORE_CC_REG(pmu->base, pmucapabilities_ext);
 		reg = chip->ops->read32(chip->ctx, addr);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 7a0601543dff..73a034172c4c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -624,6 +624,7 @@ BRCMF_FW_DEF(43455, "brcmfmac43455-sdio");
 BRCMF_FW_DEF(4354, "brcmfmac4354-sdio");
 BRCMF_FW_DEF(4356, "brcmfmac4356-sdio");
 BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
+BRCMF_FW_DEF(43012, "brcmfmac43012-sdio");
 
 static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
 	BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
@@ -643,7 +644,8 @@ static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
 	BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
 	BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
 	BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
-	BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
+	BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373),
+	BRCMF_FW_ENTRY(CY_CC_43012_CHIP_ID, 0xFFFFFFFF, 43012)
 };
 
 static void pkt_align(struct sk_buff *p, int len, int align)
@@ -677,6 +679,14 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 
+	/* In case of 43012 chip, the chip could go down immediately after
+	 * KSO bit is cleared. So the further reads of KSO register could
+	 * fail. Thereby just bailing out immediately after clearing KSO
+	 * bit, to avoid polling of KSO bit.
+	 */
+	if (!on && bus->ci->chip == CY_CC_43012_CHIP_ID)
+		return err;
+
 	if (on) {
 		/* device WAKEUP through KSO:
 		 * write bit 0 & read back until
@@ -2402,6 +2412,14 @@ static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
 	return ret;
 }
 
+static bool brcmf_chip_is_ulp(struct brcmf_chip *ci)
+{
+	if (ci->chip == CY_CC_43012_CHIP_ID)
+		return true;
+	else
+		return false;
+}
+
 static void brcmf_sdio_bus_stop(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
@@ -2409,7 +2427,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 	struct brcmf_sdio *bus = sdiodev->bus;
 	struct brcmf_core *core = bus->sdio_core;
 	u32 local_hostintmask;
-	u8 saveclk;
+	u8 saveclk, bpreq;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -2436,9 +2454,14 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		/* Force backplane clocks to assure F2 interrupt propagates */
 		saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 					    &err);
-		if (!err)
-			brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-					   (saveclk | SBSDIO_FORCE_HT), &err);
+		if (!err) {
+			bpreq = saveclk;
+			bpreq |= brcmf_chip_is_ulp(bus->ci) ?
+				SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT;
+			brcmf_sdiod_writeb(sdiodev,
+					   SBSDIO_FUNC1_CHIPCLKCSR,
+					   bpreq, &err);
+		}
 		if (err)
 			brcmf_err("Failed to force clock for F2: err %d\n",
 				  err);
@@ -3328,20 +3351,45 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 	return bcmerror;
 }
 
+static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
+{
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
+		return true;
+	else
+		return false;
+}
+
 static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 {
 	int err = 0;
 	u8 val;
+	u8 wakeupctrl;
+	u8 cardcap;
+	u8 chipclkcsr;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
+	if (brcmf_chip_is_ulp(bus->ci)) {
+		wakeupctrl = SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT;
+		chipclkcsr = SBSDIO_HT_AVAIL_REQ;
+	} else {
+		wakeupctrl = SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
+		chipclkcsr = SBSDIO_FORCE_HT;
+	}
+
+	if (brcmf_sdio_aos_no_decode(bus)) {
+		cardcap = SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC;
+	} else {
+		cardcap = (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
+			   SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT);
+	}
+
 	val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 	if (err) {
 		brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 		return;
 	}
-
-	val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
+	val |= 1 << wakeupctrl;
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
@@ -3350,8 +3398,7 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 
 	/* Add CMD14 Support */
 	brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
-			     (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-			      SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
+			     cardcap,
 			     &err);
 	if (err) {
 		brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
@@ -3359,7 +3406,7 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
 	}
 
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-			   SBSDIO_FORCE_HT, &err);
+			   chipclkcsr, &err);
 	if (err) {
 		brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 		return;
@@ -4051,7 +4098,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	const struct firmware *code;
 	void *nvram;
 	u32 nvram_len;
-	u8 saveclk;
+	u8 saveclk, bpreq;
 	u8 devctl;
 
 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
@@ -4085,8 +4132,11 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 	/* Force clocks on backplane to be sure F2 interrupt propagates */
 	saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 	if (!err) {
+		bpreq = saveclk;
+		bpreq |= brcmf_chip_is_ulp(bus->ci) ?
+			SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT;
 		brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
-				   (saveclk | SBSDIO_FORCE_HT), &err);
+				   bpreq, &err);
 	}
 	if (err) {
 		brcmf_err("Failed to force clock for F2: err %d\n", err);
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index acb87238922f..839980da9643 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -60,6 +60,7 @@
 #define BRCM_CC_43664_CHIP_ID		43664
 #define BRCM_CC_4371_CHIP_ID		0x4371
 #define CY_CC_4373_CHIP_ID		0x4373
+#define CY_CC_43012_CHIP_ID		43012
 
 /* USB Device IDs */
 #define BRCM_USB_43143_DEVICE_ID	0xbd1e
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 4224902a8e22..4332199c71c2 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -42,6 +42,7 @@
 #define SDIO_DEVICE_ID_BROADCOM_4354		0x4354
 #define SDIO_DEVICE_ID_BROADCOM_4356		0x4356
 #define SDIO_DEVICE_ID_CYPRESS_4373		0x4373
+#define SDIO_DEVICE_ID_CYPRESS_43012		43012
 
 #define SDIO_VENDOR_ID_INTEL			0x0089
 #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
-- 
2.1.0

[PATCH V4 5/8] brcmfmac: allow GCI core enumuration

[Chi-Hsien Lin]

GCI core is needed for ULP operation. Allow GCI core enumuration with
below changes:
 - Allow GCI to be added to core list even when it doesn't have a wrapper.
 - Allow 8K address space size.
 - Don't overwrite the address value when an additional size descriptor
   is in place.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index a3c857721446..a8d3b96b727f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -786,7 +786,7 @@ static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr,
 				      u32 *regbase, u32 *wrapbase)
 {
 	u8 desc;
-	u32 val;
+	u32 val, szdesc;
 	u8 mpnum = 0;
 	u8 stype, sztype, wraptype;
 
@@ -832,14 +832,15 @@ static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr,
 
 		/* next size descriptor can be skipped */
 		if (sztype == DMP_SLAVE_SIZE_DESC) {
-			val = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
+			szdesc = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
 			/* skip upper size descriptor if present */
-			if (val & DMP_DESC_ADDRSIZE_GT32)
+			if (szdesc & DMP_DESC_ADDRSIZE_GT32)
 				brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
 		}
 
-		/* only look for 4K register regions */
-		if (sztype != DMP_SLAVE_SIZE_4K)
+		/* look for 4K or 8K register regions */
+		if (sztype != DMP_SLAVE_SIZE_4K &&
+		    sztype != DMP_SLAVE_SIZE_8K)
 			continue;
 
 		stype = (val & DMP_SLAVE_TYPE) >> DMP_SLAVE_TYPE_S;
@@ -896,7 +897,8 @@ int brcmf_chip_dmp_erom_scan(struct brcmf_chip_priv *ci)
 
 		/* need core with ports */
 		if (nmw + nsw == 0 &&
-		    id != BCMA_CORE_PMU)
+		    id != BCMA_CORE_PMU &&
+		    id != BCMA_CORE_GCI)
 			continue;
 
 		/* try to obtain register address info */
-- 
2.1.0

[PATCH V4 6/8] brcmfmac: update 43012 F2 watermark setting to fix DMA Error during UDP RX Traffic

[Chi-Hsien Lin]

From: Naveen Gupta <naveen.gupta@cypress.com>

The number of words that the read FIFO has to contain except
the end of frame before sends data back to the host.
Max watermark = (512B - 2* (BurstLength))/4 =
(512 - 128)/4 = 384/4 = 0x60
so if burst length (i.e. BurstLength = 64) is increased,
watermark has to be reduced. This is the optimal setting for this chip.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Naveen Gupta <naveen.gupta@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 73a034172c4c..fe0cb398ab44 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -52,6 +52,7 @@
 /* watermark expressed in number of words */
 #define DEFAULT_F2_WATERMARK    0x8
 #define CY_4373_F2_WATERMARK    0x40
+#define CY_43012_F2_WATERMARK    0x60
 
 #ifdef DEBUG
 
@@ -4173,6 +4174,17 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 					   CY_4373_F2_WATERMARK |
 					   SBSDIO_MESBUSYCTRL_ENAB, &err);
 			break;
+		case SDIO_DEVICE_ID_CYPRESS_43012:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
+				  CY_43012_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_43012_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
 					   DEFAULT_F2_WATERMARK, &err);
-- 
2.1.0

[PATCH V4 7/8] brcmfmac: 4373 save-restore support

[Chi-Hsien Lin]

Use chipcommon sr_control0 register to check 4373 sr support.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/chip.c   |  5 +++++
 .../wireless/broadcom/brcm80211/include/chipcommon.h  | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index a8d3b96b727f..22534bf2a90c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -1365,6 +1365,11 @@ bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 		addr = CORE_CC_REG(base, sr_control1);
 		reg = chip->ops->read32(chip->ctx, addr);
 		return reg != 0;
+	case CY_CC_4373_CHIP_ID:
+		/* explicitly check SR engine enable bit */
+		addr = CORE_CC_REG(base, sr_control0);
+		reg = chip->ops->read32(chip->ctx, addr);
+		return (reg & CC_SR_CTL0_ENABLE_MASK) != 0;
 	case CY_CC_43012_CHIP_ID:
 		addr = CORE_CC_REG(pmu->base, retention_ctl);
 		reg = chip->ops->read32(chip->ctx, addr);
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h b/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h
index e1fd499930a0..de8225e6248b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h
@@ -269,6 +269,25 @@ struct chipcregs {
 /* GSIO (spi/i2c) present, rev >= 37 */
 #define	CC_CAP2_GSIO		0x00000002
 
+/* sr_control0, rev >= 48 */
+#define CC_SR_CTL0_ENABLE_MASK			BIT(0)
+#define CC_SR_CTL0_ENABLE_SHIFT		0
+#define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT	1 /* sr_clk to sr_memory enable */
+#define CC_SR_CTL0_RSRC_TRIGGER_SHIFT	2 /* Rising edge resource trigger 0 to
+					   * sr_engine
+					   */
+#define CC_SR_CTL0_MIN_DIV_SHIFT	6 /* Min division value for fast clk
+					   * in sr_engine
+					   */
+#define CC_SR_CTL0_EN_SBC_STBY_SHIFT		16
+#define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT	18
+#define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT		19
+#define CC_SR_CTL0_ALLOW_PIC_SHIFT	20 /* Allow pic to separate power
+					    * domains
+					    */
+#define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT	25
+#define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP	30
+
 /* pmucapabilities */
 #define PCAP_REV_MASK	0x000000ff
 #define PCAP_RC_MASK	0x00001f00
-- 
2.1.0

[PATCH V4 8/8] brcmfmac: disable command decode in sdio_aos

[Chi-Hsien Lin]

From: Wright Feng <wright.feng@cypress.com>

AOS is a part of the SDIOD core that becomes active when the rest of
SDIOD is sleeping to keep SDIO bus alive responding to reduced set of
commands.

Transaction between AOS and SDIOD is not protected, and if cmd 52 is
received in AOS and in the middle of response state changed from AOS to
SDIOD, response is corrupted and it causes to SDIO Host controller to
hang.

Command decode for below chips are disabled in this commit:
 - 4339
 - 4345
 - 4354
 - 4373

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index fe0cb398ab44..0cd5b8d970d7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3354,7 +3354,11 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
+	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
 		return true;
 	else
 		return false;
-- 
2.1.0

Re: [PATCH V4 0/8] brcmfmac: chip related changes

[Arend Van Spriel]

On 11/21/2018 8:53 AM, Chi-Hsien Lin wrote:
> This patch series includes various chip-related changes:
> * 43012 support
> * 4373 saverestore support
> * SDIO bus settings
> * 4354 raw chipid

Hi Kalle,

This series [1] is still marked as New in patchwork. Are you planning to 
take them?

Regards,
Arend

[1] https://patchwork.kernel.org/cover/10692067/

Re: [PATCH V4 0/8] brcmfmac: chip related changes

[Kalle Valo]

Arend Van Spriel <arend.vanspriel@broadcom.com> writes:

> On 11/21/2018 8:53 AM, Chi-Hsien Lin wrote:
>> This patch series includes various chip-related changes:
>> * 43012 support
>> * 4373 saverestore support
>> * SDIO bus settings
>> * 4354 raw chipid
>
> Hi Kalle,
>
> This series [1] is still marked as New in patchwork. Are you planning
> to take them?

Yeah, along with 111 other patches ;) In other words, I'm lagging behind
in patch review but I'll try to catch up today and tomorrow. I haven't
reviewed these patchset yet, but if all goes well I'm planning to take
these.

> [1] https://patchwork.kernel.org/cover/10692067/

BTW thanks for adding the link to patchwork, very helpful.

-- 
Kalle Valo

Re: [PATCH V4 0/8] brcmfmac: chip related changes

[Arend Van Spriel]

On 12/11/2018 2:02 PM, Kalle Valo wrote:
> Arend Van Spriel <arend.vanspriel@broadcom.com> writes:
> 
>> On 11/21/2018 8:53 AM, Chi-Hsien Lin wrote:
>>> This patch series includes various chip-related changes:
>>> * 43012 support
>>> * 4373 saverestore support
>>> * SDIO bus settings
>>> * 4354 raw chipid
>>
>> Hi Kalle,
>>
>> This series [1] is still marked as New in patchwork. Are you planning
>> to take them?
> 
> Yeah, along with 111 other patches ;) In other words, I'm lagging behind
> in patch review but I'll try to catch up today and tomorrow. I haven't
> reviewed these patchset yet, but if all goes well I'm planning to take
> these.

That's quite a loaded plate you have there. Happy digestion :-p

>> [1] https://patchwork.kernel.org/cover/10692067/
> 
> BTW thanks for adding the link to patchwork, very helpful.

It is a great resource/tool so happy to use it.

Gr. AvS

Re: [PATCH V4 1/8] brcmfmac: add 4354 raw pcie device id

[Kalle Valo]

Chi-Hsien Lin <Chi-Hsien.Lin@cypress.com> wrote:

> From: Winnie Chang <winnie.chang@cypress.com>
> 
> Add the raw 4354 PCIe device ID for unprogrammed Cypress boards.
> 
> Reviewed-by: Arend Van Spriel <arend@broadcom.com>
> Signed-off-by: Winnie Chang <winnie.chang@cypress.com>
> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>

8 patches applied to wireless-drivers-next.git, thanks.

eb6b33bfb8f5 brcmfmac: add 4354 raw pcie device id
e1a08730eeb0 brcmfmac: set F2 watermark to 256 for 4373
58e4bbea0c1d brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373
35cb51b2162a brcmfmac: add support for CYW43012 SDIO chipset
b021a6bc1175 brcmfmac: allow GCI core enumuration
f95a8d9c6aca brcmfmac: update 43012 F2 watermark setting to fix DMA Error during UDP RX Traffic
2f2d389efda4 brcmfmac: 4373 save-restore support
29f6589140a1 brcmfmac: disable command decode in sdio_aos

-- 
https://patchwork.kernel.org/patch/10692071/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches