From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com,
Jussi Kivilinna <jussi.kivilinna@mbnet.fi>,
David Brownell <dbrownell@users.sourceforge.net>
Subject: [PATCH 01/10] usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stop
Date: Thu, 30 Jul 2009 19:41:20 +0300 [thread overview]
Message-ID: <20090730164120.28317.53313.stgit@fate.lan> (raw)
rndis_wlan devices freeze after running usbnet_stop several times. It appears
that firmware freezes in state where it does not respond to any RNDIS commands
and device have to be physically unplugged/replugged. This patch lets
minidrivers to disable unlink_urbs on usbnet_stop through new info flag.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/net/usb/usbnet.c | 32 ++++++++++++++++++--------------
drivers/net/wireless/rndis_wlan.c | 9 ++++++---
include/linux/usb/usbnet.h | 1 +
3 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 25e435c..af1fe46 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -601,21 +601,25 @@ int usbnet_stop (struct net_device *net)
info->description);
}
- // ensure there are no more active urbs
- add_wait_queue (&unlink_wakeup, &wait);
- dev->wait = &unlink_wakeup;
- temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
-
- // maybe wait for deletions to finish.
- while (!skb_queue_empty(&dev->rxq)
- && !skb_queue_empty(&dev->txq)
- && !skb_queue_empty(&dev->done)) {
- msleep(UNLINK_TIMEOUT_MS);
- if (netif_msg_ifdown (dev))
- devdbg (dev, "waited for %d urb completions", temp);
+ if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) {
+ /* ensure there are no more active urbs */
+ add_wait_queue(&unlink_wakeup, &wait);
+ dev->wait = &unlink_wakeup;
+ temp = unlink_urbs(dev, &dev->txq) +
+ unlink_urbs(dev, &dev->rxq);
+
+ /* maybe wait for deletions to finish. */
+ while (!skb_queue_empty(&dev->rxq)
+ && !skb_queue_empty(&dev->txq)
+ && !skb_queue_empty(&dev->done)) {
+ msleep(UNLINK_TIMEOUT_MS);
+ if (netif_msg_ifdown(dev))
+ devdbg(dev, "waited for %d urb completions",
+ temp);
+ }
+ dev->wait = NULL;
+ remove_wait_queue(&unlink_wakeup, &wait);
}
- dev->wait = NULL;
- remove_wait_queue (&unlink_wakeup, &wait);
usb_kill_urb(dev->interrupt);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 09c0702..76c5ec6 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2513,7 +2513,8 @@ static int rndis_wlan_stop(struct usbnet *usbdev)
static const struct driver_info bcm4320b_info = {
.description = "Wireless RNDIS device, BCM4320b based",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
@@ -2527,7 +2528,8 @@ static const struct driver_info bcm4320b_info = {
static const struct driver_info bcm4320a_info = {
.description = "Wireless RNDIS device, BCM4320a based",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
@@ -2541,7 +2543,8 @@ static const struct driver_info bcm4320a_info = {
static const struct driver_info rndis_wlan_info = {
.description = "Wireless RNDIS device",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 7c17b2e..c642f78 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -86,6 +86,7 @@ struct driver_info {
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
+#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
/* init device ... can sleep, or cause probe() failure */
next reply other threads:[~2009-07-30 16:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-30 16:41 Jussi Kivilinna [this message]
2009-07-30 16:41 ` [PATCH 02/10] rndis_wlan: stop workers on rndis_wlan_stop() and restore on rndis_wlan_reset() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 03/10] rndis_wlan: clear cfg80211 scan on rndis_wlan_stop() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 04/10] rndis_wlan: reset device and restore multicast list on rndis_wlan_reset() Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 05/10] rndis_wlan: set current packet filter to zero on stop Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 06/10] rndis_wlan: add rndis_set/query_oid debugging Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 07/10] rndis_host: allow rndis_wlan to see all indications Jussi Kivilinna
2009-07-30 16:41 ` [PATCH 08/10] rndis_wlan: handle 802.11 indications from device Jussi Kivilinna
2009-07-30 16:42 ` [PATCH 09/10] rndis_wlan: add missing padding to struct rndis_80211_remove_key Jussi Kivilinna
2009-07-30 16:42 ` [PATCH 10/10] rndis_wlan: rework key handling Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090730164120.28317.53313.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).