From: Nick Kossifidis <mick@madwifi-project.org>
To: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, jirislaby@gmail.com, me@bobcopeland.com,
mcgrof@gmail.com, nbd@openwrt.org
Subject: [PATCH 4/4] ath5k: Use SWI to trigger calibration
Date: Fri, 31 Jul 2009 21:10:20 +0300 [thread overview]
Message-ID: <20090731181020.GE7963@makis> (raw)
* Get rid of calibration timer, instead use a software interrupt
to schedule the calibration tasklet.
---
drivers/net/wireless/ath/ath5k/ath5k.h | 16 ++++++++++++++++
drivers/net/wireless/ath/ath5k/base.c | 28 ++++++++++++++++++----------
drivers/net/wireless/ath/ath5k/base.h | 3 ++-
drivers/net/wireless/ath/ath5k/phy.c | 20 ++++++++++++++++++++
4 files changed, 56 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 1047a6c..76cf5b2 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -919,6 +919,12 @@ enum ath5k_int {
AR5K_INT_NOCARD = 0xffffffff
};
+/* Software interrupts used for calibration */
+enum ath5k_software_interrupt {
+ AR5K_SWI_FULL_CALIBRATION = 0x01,
+ AR5K_SWI_SHORT_CALIBRATION = 0x02,
+};
+
/*
* Power management
*/
@@ -1123,6 +1129,15 @@ struct ath5k_hw {
/* noise floor from last periodic calibration */
s32 ah_noise_floor;
+ /* Calibration timestamp */
+ u32 ah_cal_tstamp;
+
+ /* Calibration interval (secs) */
+ u8 ah_cal_intval;
+
+ /* Software interrupt mask */
+ u8 ah_swi_mask;
+
/*
* Function pointers
*/
@@ -1276,6 +1291,7 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
/* Spur mitigation */
bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index b64731b..02fa71a 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -59,7 +59,7 @@
#include "reg.h"
#include "debug.h"
-static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
+static u8 ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
static int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
@@ -376,7 +376,7 @@ static int ath5k_stop_hw(struct ath5k_softc *sc);
static irqreturn_t ath5k_intr(int irq, void *dev_id);
static void ath5k_tasklet_reset(unsigned long data);
-static void ath5k_calibrate(unsigned long data);
+static void ath5k_tasklet_calibrate(unsigned long data);
/*
* Module init/exit functions
@@ -799,8 +799,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
+ tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
- setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
ret = ath5k_eeprom_read_mac(ah, mac);
if (ret) {
@@ -2366,7 +2366,7 @@ ath5k_init(struct ath5k_softc *sc)
sc->curband = &sc->sbands[sc->curchan->band];
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
- AR5K_INT_FATAL | AR5K_INT_GLOBAL;
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_SWI;
ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
@@ -2383,8 +2383,8 @@ ath5k_init(struct ath5k_softc *sc)
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(ah, false);
- mod_timer(&sc->calib_tim, round_jiffies(jiffies +
- msecs_to_jiffies(ath5k_calinterval * 1000)));
+ /* Set PHY calibration timestamp and inteval */
+ ah->ah_cal_intval = ath5k_calinterval;
ret = 0;
done:
@@ -2477,7 +2477,6 @@ ath5k_stop_hw(struct ath5k_softc *sc)
mmiowb();
mutex_unlock(&sc->lock);
- del_timer_sync(&sc->calib_tim);
tasklet_kill(&sc->rxtq);
tasklet_kill(&sc->txtq);
tasklet_kill(&sc->restq);
@@ -2536,6 +2535,9 @@ ath5k_intr(int irq, void *dev_id)
if (status & AR5K_INT_BMISS) {
/* TODO */
}
+ if (status & AR5K_INT_SWI) {
+ tasklet_schedule(&sc->calib);
+ }
if (status & AR5K_INT_MIB) {
/*
* These stats are also used for ANI i think
@@ -2552,6 +2554,8 @@ ath5k_intr(int irq, void *dev_id)
if (unlikely(!counter))
ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
+ ath5k_hw_calibration_poll(ah);
+
return IRQ_HANDLED;
}
@@ -2568,11 +2572,15 @@ ath5k_tasklet_reset(unsigned long data)
* for temperature/environment changes.
*/
static void
-ath5k_calibrate(unsigned long data)
+ath5k_tasklet_calibrate(unsigned long data)
{
struct ath5k_softc *sc = (void *)data;
struct ath5k_hw *ah = sc->ah;
+ /* Only full calibration for now */
+ if (ah->ah_swi_mask != AR5K_SWI_FULL_CALIBRATION)
+ return;
+
ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
ieee80211_frequency_to_channel(sc->curchan->center_freq),
sc->curchan->hw_value);
@@ -2590,8 +2598,8 @@ ath5k_calibrate(unsigned long data)
ieee80211_frequency_to_channel(
sc->curchan->center_freq));
- mod_timer(&sc->calib_tim, round_jiffies(jiffies +
- msecs_to_jiffies(ath5k_calinterval * 1000)));
+ ah->ah_swi_mask = 0;
+
}
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 778e422..667bd9d 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -177,6 +177,8 @@ struct ath5k_softc {
struct ath5k_rfkill rf_kill;
+ struct tasklet_struct calib; /* calibration tasklet */
+
spinlock_t block; /* protects beacon */
struct tasklet_struct beacontq; /* beacon intr tasklet */
struct ath5k_buf *bbuf; /* beacon buffer */
@@ -187,7 +189,6 @@ struct ath5k_softc {
unsigned int nexttbtt; /* next beacon time in TU */
struct ath5k_txq *cabq; /* content after beacon */
- struct timer_list calib_tim; /* calibration timer */
int power_level; /* Requested tx power in dbm */
bool assoc; /* assocate state */
bool enable_beacon; /* true if beacons are on */
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 6afba98..d30bc3b 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1104,6 +1104,26 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
PHY calibration
\*****************/
+void
+ath5k_hw_calibration_poll(struct ath5k_hw *ah)
+{
+ u32 current_time = (jiffies / HZ);
+ u32 cal_intval = ah->ah_cal_intval;
+
+ if (!ah->ah_cal_tstamp)
+ ah->ah_cal_tstamp = current_time;
+
+ /* For now we always do full calibration
+ * Mark software interrupt mask and fire software
+ * interrupt (bit gets auto-cleared) */
+ if ((current_time - ah->ah_cal_tstamp) >= cal_intval) {
+ ah->ah_cal_tstamp = current_time;
+ ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
+ }
+
+}
+
/**
* ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
*
next reply other threads:[~2009-07-31 18:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-31 18:10 Nick Kossifidis [this message]
2009-07-31 18:15 ` [PATCH 4/4] ath5k: Use SWI to trigger calibration Luis R. Rodriguez
2009-07-31 18:25 ` [ath5k-devel] " Nick Kossifidis
2009-07-31 18:48 ` Luis R. Rodriguez
2009-07-31 19:09 ` Pavel Roskin
2009-07-31 19:35 ` Nick Kossifidis
2009-07-31 19:43 ` Pavel Roskin
2009-07-31 19:11 ` Bob Copeland
2009-07-31 19:52 ` Nick Kossifidis
2009-08-01 13:22 ` Bob Copeland
2009-08-01 13:31 ` Nick Kossifidis
2009-08-02 16:14 ` Bob Copeland
2009-07-31 18:34 ` Nick Kossifidis
2009-08-01 5:46 ` Nick Kossifidis
2009-08-01 8:19 ` Jiri Slaby
2009-08-01 8:21 ` Johannes Berg
2009-08-01 8:24 ` Jiri Slaby
2009-08-01 8:28 ` Johannes Berg
2009-08-01 8:31 ` [ath5k-devel] " Nick Kossifidis
2009-08-01 8:35 ` Jiri Slaby
2009-08-03 17:54 ` Nick Kossifidis
2009-08-07 14:55 ` John W. Linville
2009-08-07 19:50 ` Nick Kossifidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090731181020.GE7963@makis \
--to=mick@madwifi-project.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=jirislaby@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
--cc=me@bobcopeland.com \
--cc=nbd@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).