From: Kalle Valo <kalle.valo@iki.fi>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 14/23] wl1251: initialise default channel to zero
Date: Fri, 07 Aug 2009 13:34:27 +0300 [thread overview]
Message-ID: <20090807103426.31717.54343.stgit@tikku> (raw)
In-Reply-To: <20090807102732.31717.84006.stgit@tikku>
From: Kalle Valo <kalle.valo@nokia.com>
Because wl->channel was initialised to one, the first join command in
wl1251_op_config() always failed.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
---
drivers/net/wireless/wl12xx/wl1251.h | 2 ++
drivers/net/wireless/wl12xx/wl1251_main.c | 2 +-
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 86d2abe..998e4b6 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -398,6 +398,8 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
#define WL1251_DEFAULT_BEACON_INT 100
#define WL1251_DEFAULT_DTIM_PERIOD 1
+#define WL1251_DEFAULT_CHANNEL 0
+
#define CHIP_ID_1251_PG10 (0x7010101)
#define CHIP_ID_1251_PG11 (0x7020101)
#define CHIP_ID_1251_PG12 (0x7030101)
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index d031692..2514c94 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -461,6 +461,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
wl->psm = 0;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
+ wl->channel = WL1251_DEFAULT_CHANNEL;
wl1251_debugfs_reset(wl);
@@ -1302,7 +1303,6 @@ out:
}
EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
-#define WL1251_DEFAULT_CHANNEL 1
struct ieee80211_hw *wl1251_alloc_hw(void)
{
struct ieee80211_hw *hw;
next prev parent reply other threads:[~2009-08-07 10:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 10:32 [PATCH 00/23] wl1251 sdio support Kalle Valo
2009-08-07 10:32 ` [PATCH 01/23] wl1251: remove fixed address support from spi commands Kalle Valo
2009-08-07 10:32 ` [PATCH 02/23] wl1251: separate bus i/o code into io.c Kalle Valo
2009-08-07 10:33 ` [PATCH 03/23] wl1251: use wiphy_dev instead of wl->spi->dev Kalle Valo
2009-08-07 10:33 ` [PATCH 04/23] wl1251: introduce wl1251_if_operations struct Kalle Valo
2009-08-07 10:33 ` [PATCH 05/23] wl1251: make wl1251_set_partition bus agnostic Kalle Valo
2009-08-07 10:33 ` [PATCH 06/23] wl1251: move module probe methods into spi.c Kalle Valo
2009-08-07 10:33 ` [PATCH 07/23] wl1251: split spi interface into separate module Kalle Valo
2009-08-07 10:33 ` [PATCH 08/23] wl1251: add sdio support Kalle Valo
2009-08-07 10:33 ` [PATCH 09/23] wl1251: make irq handling interface specific Kalle Valo
2009-08-07 10:33 ` [PATCH 10/23] wl1251: remove wl1251_ops Kalle Valo
2009-08-07 10:34 ` [PATCH 11/23] wl1251: reorder wl1251_cmd_join() arguments Kalle Valo
2009-08-07 10:34 ` [PATCH 12/23] wl1251: use beacon interval and dtim period provided by mac80211 Kalle Valo
2009-08-07 10:34 ` [PATCH 13/23] wl1251: remove wait parameter from wl1251_cmd_join() Kalle Valo
2009-08-07 10:34 ` Kalle Valo [this message]
2009-08-07 10:34 ` [PATCH 15/23] wl1251: add channel to wl1251_cmd_join() parameters Kalle Valo
2009-08-07 10:34 ` [PATCH 16/23] wl1251: create wl1251_join() Kalle Valo
2009-08-07 10:34 ` [PATCH 17/23] wl1251: fix channel setting in wl1251_op_config() Kalle Valo
2009-08-07 10:34 ` [PATCH 18/23] wl1251: move wl1251_acx_wake_up_conditions() to wl1251_ps_set_mode() Kalle Valo
2009-08-07 10:35 ` [PATCH 19/23] wl1251: use workqueue provided by mac80211 Kalle Valo
2009-08-07 10:35 ` [PATCH 20/23] wl1251: rename reg.h to wl1251_reg.h Kalle Valo
2009-08-07 10:35 ` [PATCH 21/23] wl1251: remove Luciano as maintainer Kalle Valo
2009-08-07 10:46 ` Luciano Coelho
2009-08-07 10:35 ` [PATCH 22/23] wl1251: add hw scan completed debug message Kalle Valo
2009-08-07 10:35 ` [PATCH 23/23] wl1251: hack to disable filters for fixing association Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090807103426.31717.54343.stgit@tikku \
--to=kalle.valo@iki.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).