[PATCH] ath9k: Added get_survey callback in order to get channel noise

[PATCH] ath9k: Added get_survey callback in order to get channel noise

[Benoit Papillault]

Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>
---
 drivers/net/wireless/ath/ath9k/main.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c03821e..f0b2aa2 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2047,6 +2047,25 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 	return ret;
 }
 
+static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
+			     struct survey_info *survey)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &hw->conf;
+
+	 if (idx != 0)
+		return -ENOENT;
+
+	survey->channel = conf->channel;
+	survey->filled = SURVEY_INFO_NOISE_DBM;
+	survey->noise = common->ani.noise_floor;
+
+	return 0;
+}
+
 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
@@ -2122,6 +2141,7 @@ struct ieee80211_ops ath9k_ops = {
 	.set_tsf 	    = ath9k_set_tsf,
 	.reset_tsf 	    = ath9k_reset_tsf,
 	.ampdu_action       = ath9k_ampdu_action,
+	.get_survey	    = ath9k_get_survey,
 	.sw_scan_start      = ath9k_sw_scan_start,
 	.sw_scan_complete   = ath9k_sw_scan_complete,
 	.rfkill_poll        = ath9k_rfkill_poll_state,
-- 
1.5.6.5

Re: [PATCH] ath9k: Added get_survey callback in order to get channel noise

[Luis R. Rodriguez]

On Tue, Apr 27, 2010 at 03:08:24PM -0700, Benoit Papillault wrote:
> 
> Signed-off-by: Benoit Papillault <benoit.papillault@free.fr>

Looks good, thanks for this work.

  Luis

Re: [PATCH] ath9k: Added get_survey callback in order to get channel noise

[Jouni Malinen]

On Tue, 2010-04-27 at 15:08 -0700, Benoit Papillault wrote:
> +static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
> +			     struct survey_info *survey)

> +	struct ieee80211_conf *conf = &hw->conf;
> +
> +	 if (idx != 0)
> +		return -ENOENT;
> +
> +	survey->channel = conf->channel;

Are there any plans on providing this information from all channels? I
have assumed that the survey command was supposed to be used for
surveying all channels (e.g., to get information for auto-channel
selection) and returning something for the current channel is quite
limited subset of that. In other words, I would like to be able to run a
scan of all channels and then use NL80211_CMD_GET_SURVEY to fetch
additional per-channel information like noise (and also channel usage
statistics in case of ath9k) from the scanned channels.

- Jouni

kernel warning on 2.6.33 ath9k

[Xu, Martin]
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Re: kernel warning on 2.6.33 ath9k

[John W. Linville]

On Wed, Apr 28, 2010 at 04:01:45PM +0800, Xu, Martin wrote:
> Hi
> I found that kernel reports below warning when using ath9k in kernel 2.6.33.
> Someone can kindly tell me whether it is the new found issue or the issue is known and has been fixed in later commit in git tree?
> Thanks!

Looks like this:

	https://bugzilla.kernel.org/show_bug.cgi?id=15839

> ------------[ cut here ]------------
> WARNING: at kernel/softirq.c:143 local_bh_enable_ip+0x32/0x76()
> Hardware name: AO532h          
> Modules linked in: cbc ecryptfs ath9k ath9k_common battery atl1c joydev ath9k_hw uvcvideo
> Pid: 850, comm: wpa_supplicant Not tainted 2.6.33.2-8.1-netbook #1
> Call Trace:
>  [<c1030978>] warn_slowpath_common+0x66/0x7d
>  [<c1035a74>] ? local_bh_enable_ip+0x32/0x76
>  [<c103099c>] warn_slowpath_null+0xd/0x10
>  [<c1035a74>] local_bh_enable_ip+0x32/0x76
>  [<c14789c0>] _raw_spin_unlock_bh+0x17/0x19
>  [<f871dbd3>] ath_tx_node_cleanup+0xe0/0xf9 [ath9k]
>  [<c103ae46>] ? lock_timer_base+0x22/0x41
>  [<f871a005>] ath9k_sta_notify+0x74/0x78 [ath9k]
>  [<c1443987>] __sta_info_unlink+0x139/0x189
>  [<f8719f91>] ? ath9k_sta_notify+0x0/0x78 [ath9k]
>  [<c14439fa>] sta_info_unlink+0x23/0x31
>  [<c1448834>] ieee80211_set_disassoc+0x1bd/0x1e3
>  [<c1448cf8>] ieee80211_mgd_deauth+0x3c/0xfe
>  [<c144df21>] ieee80211_deauth+0x14/0x16
>  [<c143c3fc>] __cfg80211_mlme_deauth+0xe9/0xf2
>  [<c143eea1>] __cfg80211_disconnect+0xcb/0x12e
>  [<c1440b74>] cfg80211_wext_siwmlme+0x64/0x80
>  [<c1441cf6>] ioctl_standard_call+0x1d7/0x26f
>  [<c139281b>] ? dev_get_by_name_rcu+0x73/0x80
>  [<c13928d9>] ? __dev_get_by_name+0x71/0x7e
>  [<c1441e81>] wext_handle_ioctl+0xf3/0x17e
>  [<c1440b10>] ? cfg80211_wext_siwmlme+0x0/0x80
>  [<c1396410>] dev_ioctl+0x578/0x598
>  [<c10091b9>] ? restore_i387_fxsave+0x54/0x66
>  [<c1387b44>] sock_ioctl+0x1cf/0x1db
>  [<c10b0979>] vfs_ioctl+0x28/0x92
>  [<c1387975>] ? sock_ioctl+0x0/0x1db
>  [<c10b0ed6>] do_vfs_ioctl+0x453/0x491
>  [<c1388233>] ? sys_recvmsg+0x2c/0x47
>  [<c1389542>] ? sys_socketcall+0x147/0x18c
>  [<c10b0f43>] sys_ioctl+0x2f/0x49
>  [<c10027d0>] sysenter_do_call+0x12/0x26

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH] ath9k: Added get_survey callback in order to get channel noise

[Benoit PAPILLAULT]

Jouni Malinen a écrit :
> On Tue, 2010-04-27 at 15:08 -0700, Benoit Papillault wrote:
>   
>> +static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
>> +			     struct survey_info *survey)
>>     
>
>   
>> +	struct ieee80211_conf *conf = &hw->conf;
>> +
>> +	 if (idx != 0)
>> +		return -ENOENT;
>> +
>> +	survey->channel = conf->channel;
>>     
>
> Are there any plans on providing this information from all channels? I
> have assumed that the survey command was supposed to be used for
> surveying all channels (e.g., to get information for auto-channel
> selection) and returning something for the current channel is quite
> limited subset of that. In other words, I would like to be able to run a
> scan of all channels and then use NL80211_CMD_GET_SURVEY to fetch
> additional per-channel information like noise (and also channel usage
> statistics in case of ath9k) from the scanned channels.
>
> - Jouni
>   
Hi Jouni,

I dig into the source code to understand the use of "idx" and having the 
value for all scanned channels sounds a good plan. However :

- when doing a normal scan (iw dev wlan0 scan), the noise floor 
calibration is started in a special mode, so I don't know if the results 
is accurate enought.

- the first calibration takes some times .... more than the scan itself. 
So, you cannot get a valid value before switching to the next channel.

Anyway, how idx is supposed to be used? From 0 ... up to the callback 
returning -ENOENT ?
Do we need to keep a table with noise for each channel and return those 
where we have a value, in which case idx cannot be used as an index into 
this table ?

Regards,
Benoit

RE: kernel warning on 2.6.33 ath9k

[Xu, Martin]

> -----Original Message-----
> From: John W. Linville [mailto:linville@tuxdriver.com]
> Sent: Wednesday, April 28, 2010 10:05 PM
> To: Xu, Martin
> Cc: ath9k-devel@lists.ath5k.org; linux-wireless@vger.kernel.org
> Subject: Re: kernel warning on 2.6.33 ath9k
> 
> On Wed, Apr 28, 2010 at 04:01:45PM +0800, Xu, Martin wrote:
> > Hi
> > I found that kernel reports below warning when using ath9k in kernel 2.6.33.
> > Someone can kindly tell me whether it is the new found issue or the issue is
> known and has been fixed in later commit in git tree?
> > Thanks!
> 
> Looks like this:
Yes, just this, thanks.