From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from charlotte.tuxdriver.com ([70.61.120.58]:51686 "EHLO smtp.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751547Ab0HWS3m (ORCPT ); Mon, 23 Aug 2010 14:29:42 -0400 Date: Mon, 23 Aug 2010 14:29:03 -0400 From: "John W. Linville" To: Thomas Fjellstrom Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: ath5k problem with 2.6.35 Message-ID: <20100823182903.GE2609@tuxdriver.com> References: <201008220005.38969.tfjellstrom@strangesoft.net> <201008220153.41678.thomas@fjellstrom.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <201008220153.41678.thomas@fjellstrom.ca> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Sun, Aug 22, 2010 at 01:53:41AM -0600, Thomas Fjellstrom wrote: > On August 22, 2010, Thomas Fjellstrom wrote: > > Hi, I'm running 2.6.35, and my wireless card fails to initialize properly > > on boot. I get the following messages in dmesg: > > Probably important, but I missed a couple lines: > > > [ 0.866525] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > > 17 [ 0.866536] ath5k 0000:02:00.0: setting latency timer to 64 > > [ 0.866571] ath5k 0000:02:00.0: registered as 'phy0' > > [ 1.358241] ath: EEPROM regdomain: 0x67 > > [ 1.358242] ath: EEPROM indicates we should expect a direct regpair map > > [ 1.358245] ath: Country alpha2 being used: 00 > > [ 1.358247] ath: Regpair used: 0x67 > [ 1.360589] phy0: Failed to initialize wep: -2 > > [ 1.372021] ath5k phy0: can't register ieee80211 hw > > [ 1.372080] ath5k 0000:02:00.0: PCI INT A disabled > > [ 1.372084] ath5k: probe of 0000:02:00.0 failed with error -2 Did you enable fips mode? John -- John W. Linville Someday the world will need a hero, and you linville@tuxdriver.com might be all we have. Be ready.