linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 0/8] ath10k: Add thermal mitigation support
Date: Wed, 17 Dec 2014 12:20:35 +0200	[thread overview]
Message-ID: <20141217101755.15964.2625.stgit@potku.adurom.net> (raw)

The following patches add thermal sensor and thermal cooling device
support in ath10k. For sensor, hwmon interface is used. For controlling
temperature cooling device interface is used. For thermal mitigation,
tx throttling is done using hw MAC quiet time setting.

v2:

* use ATH10K_FW_IE_WMI_OP_VERSION instead of a feature flag

* add separate wmi mappings for 10.2.4

* bump up FW API to 4

* new patch: ath10k: set max_num_vdevs based on wmi op version

* new patch: ath10k: use wmi op version to check which iface
  combination to use

* new patch: ath10k: print ath10k wmi op version

---

Kalle Valo (3):
      ath10k: set max_num_vdevs based on wmi op version
      ath10k: use wmi op version to check which iface combination to use
      ath10k: print ath10k wmi op version

Rajkumar Manoharan (5):
      ath10k: add 10.2.4 firmware support
      ath10k: add wmi support for pdev_set_quiet_mode
      ath10k: add thermal cooling device support
      ath10k: add wmi interface for pdev_get_temperature
      ath10k: add thermal sensor device support


 drivers/net/wireless/ath/ath10k/Makefile  |    1 
 drivers/net/wireless/ath/ath10k/core.c    |   30 ++
 drivers/net/wireless/ath/ath10k/core.h    |    4 
 drivers/net/wireless/ath/ath10k/debug.c   |    7 -
 drivers/net/wireless/ath/ath10k/hw.h      |    4 
 drivers/net/wireless/ath/ath10k/mac.c     |   22 +-
 drivers/net/wireless/ath/ath10k/thermal.c |  238 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/thermal.h |   58 +++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |   39 +++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |    3 
 drivers/net/wireless/ath/ath10k/wmi.c     |  355 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   20 ++
 12 files changed, 764 insertions(+), 17 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/thermal.c
 create mode 100644 drivers/net/wireless/ath/ath10k/thermal.h

             reply	other threads:[~2014-12-17 10:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-17 10:20 Kalle Valo [this message]
2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo
2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo
2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo
2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo
2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo
2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo
2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo
2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo
     [not found]   ` <5491D20F.2020202@dd-wrt.com>
2014-12-23 17:43     ` Kalle Valo
2014-12-23 19:52       ` Sebastian Gottschall
2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141217101755.15964.2625.stgit@potku.adurom.net \
    --to=kvalo@qca.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).